Research Elektronics är ett företag som utvecklar elektroniska system. I sinalösningar använder de bl.a. Siemens C500 Mikroprocessorer. Företagetplanerar nu att gå över till Philips LPC 2292 som bygger på en 32-bitarsARM-kärna. Denna mikroprocessor har högre prestanda och är merkostnadseffektiv.Uppgiften bestod av att göra ett monitorprogram som bl.a.

Children's Need In Focus (BBIC) is a processing and documentation system used in child welfare cases to investigate, plan and monitor interventions. The BBIC has had a breakthrough in Sweden and out of the country's 290 municipalities, there are 284 that use the system daily as a tool in cases involving children. The purpose of this study was to examine how social workers experience the BBIC as a working system and what strengths and weaknesses there are in the BBIC concept. We wanted our study to examine how the BBIC could possibly enhance the quality of childcare matters, but also how the BBIC could potentially increase children's participation in cases. We have performed qualitative interviews with eight social workers who work in four different municipalities where the BBIC is applied daily.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Children's Need In Focus (BBIC) is a processing and documentation system used in child welfare cases to investigate, plan and monitor interventions. The BBIC has had a breakthrough in Sweden and out of the country's 290 municipalities, there are 284 that use the system daily as a tool in cases involving children. The purpose of this study was to examine how social workers experience the BBIC as a working system and what strengths and weaknesses there are in the BBIC concept. We wanted our study to examine how the BBIC could possibly enhance the quality of childcare matters, but also how the BBIC could potentially increase children's participation in cases. We have performed qualitative interviews with eight social workers who work in four different municipalities where the BBIC is applied daily.

Virtualisering och övervakning är två snabbt växande områden inom IT-branschen. Denna rapport behandlar övervakningen av databas-servrar med hjälp av två olika verktyg, op5 monitor samt VMware vCenter.Det svenska företaget op5 AB har utvecklat op5 monitor och detta verktyg används idag av flera stora företag för att övervaka deras nätverkselement, Data Ductus är ett av dem. Ductus ligger i framkant när det kommer till systemövervakning men är i behov att utöka sin övervakning på databas-servrar. Uppdraget antogs därför av oss att hitta en lösning som ska kunna implementeras i deras produktionsmiljö.Beskrivningar presenteras av de teoretiska delar som ingår i övervakning och virtualisering med VMware ESXi. En lösning för att övervaka Microsofts databasserver i op5 tas fram och testas, lösningen görs så generell som möjligt för att den lätt ska kunna tas i bruk.Även en jämförelse mellan fysisk och virtuell övervakning granskas och perl-programmet check mssql health används som mall för att skapa checkar av intressanta mätvärden att övervaka hos en databas-server.Felkällor och förbättringar samt framtida arbete diskuteras och slutsatsen dras att op5 är det överlägsna övervakningsverktyget på grund av dess flexibilitet..

Children's Need In Focus (BBIC) is a processing and documentation system used in child welfare cases to investigate, plan and monitor interventions. The BBIC has had a breakthrough in Sweden and out of the country's 290 municipalities, there are 284 that use the system daily as a tool in cases involving children. The purpose of this study was to examine how social workers experience the BBIC as a working system and what strengths and weaknesses there are in the BBIC concept. We wanted our study to examine how the BBIC could possibly enhance the quality of childcare matters, but also how the BBIC could potentially increase children's participation in cases. We have performed qualitative interviews with eight social workers who work in four different municipalities where the BBIC is applied daily.

Då det intellektuella kapitalet utgör en viktig del av ett företags totala tillgångar, har vi valt att undersöka hur hanteringen och styrningen av detta kapital ser ut i verkligheten. Dessutom ville vi se om våra undersökningsföretag skulle kunna förbättra sin hantering av IK genom att tillämpa de modeller som finns på området. De modeller vi valt att titta närmare på är Skandia Navigator, The Intangible Assets Monitor och IK Index modellen. Ingen av dessa modeller användes i dessa företag då undersökningen gjordes. Vi har funnit att två av de fyra undersökta företagen har bättre förutsättningar för att tillgodogöra sig någon av dessa modeller..

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

This report describes the development and implementation of a system for transmitting digital information at high speeds from a miniaturized submersible developed by the Ångström Space Technology Centre at Uppsala University. For instance, the vehicle shall transmit image data ? even stream live video - through an optical fibre to a monitor in a ground station. Hence, the system shall be used both to convert the image data to make it transmittable, and to recreate it at the receiver.The work includes a pre-study of the programming language and the technology used. A concept for the solution is presented together with main components later broken down into internal functions.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.