This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

This master thesis aims to examine the methods of the conservation field and their visionabout maintenance and change, in terms of liturgical values. This is to be able todetermine if there is a need to develop the methods that the field of conservation has tosafeguard the intangible cultural heritage of the churches.This is mainly a literature review, focusing on different tutorials from the Swedish nationalheritage board, and different texts on liturgy aswell as Unesco's Convention for theSafeguarding of intagible Heritage (2003), ratified in Sweden in January 2011. A casestudy of the practical work has been carried out on three churches that have undergonechange. The application process and the results were important for this study.The conclusion is that the conservation field have ambitions to preserve the liturgicalvalues, but they do not have sufficiently developed methods to do so. Nevertheless, itappears that most cases of change in churches, increases the liturgical values..

I en global värld där närmaste konkurrenten bara är ett musklick bort från den potentiella kunden är behovet av att kunna marknadsföra på ett bra sätt elementärt.Försäljaren vill behålla befintliga kunder inom företaget och behovet av att göra sighörd har ökat betydligt. Detta har bidragit till att en ny marknad vuxit fram med stöd från informationssystem med funktioner som tillhandahåller möjligheten att rikta sin marknadsföring mot en speciell kund. Systemen kallas CRM-system, CRM står för Customer Relationship Management. Många större organisationer känner behovet av att införa denna typ avsystem i den egna organisationen. Kompetensen och insikten om vilka förändringar ett CRM-system innebär för organisationen är ofta mycket låg och införandet resulterar ofta i utebliven framgång.

CML Data AB is a small IT-company that offers complete IT-solutions adjusted to the needs of the customers. It is hard for the employees to bring all necessary papers, files and software when visiting a customer. They also have difficulties planning their daily work and to keep track of each other, because of the lack of a shared calendar.The purpose of this report is to answer the following questions:- How do you develop a centralized information system for CML Data AB where it is possible for the employees to gain access to files, plan their days and where the customers can get access to relevant information?- How do you develop an information system that is easy to manage?- How do you make it easier for the employees at CML Data AB to update their homepage?We discussed the problems and the future information system with the employees and were able to establish a set of needs and requirements which we then used as a foundation during the software development. We used user centered system design during the whole process and focused a lot on usability and interaction design.The project resulted in a stylistically pure and user friendly portal.

Delegation of assignments regarding the work environment is a complex topic that is difficult to illustrate. It is not explicit mentioned in the law and the established practice are ambiguous and vague. This has caused a lot of confusion, not only for private companies but also for executives within public administration.Metso paper Karlstad Inc. gave us the assignments to investigate their delegation system and to analyze the need of change before a planed readjustment. The purpose of this essay is therefore to investigate how the proposed delegation system is constructed and whether it fulfills the demands established by Swedish law.

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

Förväntad effekt av vårdens elektroniska IT-system är ökad patientsäkerhet, vårdkvalitet och tillgänglighet. Ett första villkor för att kunna uppnå detta är att IT-systemet används. I denna studie granskas ett underutnyttjat IT-system, använt för informationsöverföring mellan olika huvudmän vid samordnad vård- och omsorgsplanering.Granskningen baseras på teorier om hur individers intention och vilja till att använda ett IT-system initieras eller upprätthålls genom omgivningens påverkan.Resultatet visar att IT-användare i den patientnära vården (mikrosystemet) saknar adekvat tekniskt, organisatoriskt (mesosystemet) och ledningsstöd (makrosystemet), vilket kan förklara underutnyttjandet..

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Executive summary This master thesis was originally based on a specific assignment given to the authors from ABB Full Service, a unit specializing in providing maintenance outsourcing: ?How can ABB Full Service expand its offering of providing fundamental maintenance by seamlessly incorporating the business concept with competencies and solutions from other ABB divisions?? The academic issue was developed throughout the thesis, resulting in the following formulation: ?From an organizational perspective; how can service providers bring continuous added value to intra-organizational outsourcing partnerships?? Many of the key findings of this thesis are reflected in the issue. The term intra-organizational outsourcing is a proposed addition to the terminology in the academic discourse on outsourcing. The definition of the term is: ? Where an organization outsources a business process interlinked with the physical operations, requiring the service provider to take over a preexisting unit and its employees.This is an accurate description of the form of outsourcing that ABB Full Service is engaged in.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

Denna rapport beskriver arbetet med att utveckla ett API (Application Programming Interface) till Eurocons projekteringssystem SiteBase. Utvecklingen av systemet har bedrivits som ett examensarbete på uppdrag av Eurocon Consulting AB i Örnsköldsvik. Examensarbetet har bedrivits som en examinerande kurs för en högskoleingenjörsexamen med inriktning elektronik med en specialisering mot datorteknik och inbyggda system.Arbetet består av att utveckla ett API, till ett projekteringssystem baserat på WCF (Windows Communication Foundation), som är konfigurerbar så att den relativt enkelt ska kunna integreras med andra system.Syftet är att underlätta och minska den utvecklingstid det tar att integrera andra system med SiteBase, att skapa en bas att utgå ifrån för framtida integrationer.Systemet är utvecklat i C# med Visual Studio 2010 samt med Microsoft NET Framework 4.0 som ramverk. Utvecklingen av systemet har framställts i faser där delar av systemet utvecklats innan nästa del påbörjats..

MPS-system syftar till att öka intäkterna, minska kostnaderna och frigöra kapital genom ökad leveransservice, flexibilitet och reducerade kostnader för lagerhållning, administration och transporter. Implementeringen av ett datoriserat MPS-system ska leda till förbättringar, kostnadsbesparingar och i överlag bara positiva förändringar hos tillverkande företag enligt litteraturen. Studien avser att undersöka vilka förbättringar och nackdelar/begränsningar företag som implementerat MPS-system upplever med sina MPS-system. Har de kunnat förbättra styrningen och kontrollen av verksamheten, i form av förbättrade variabler, som kan påvisas till implementeringen av MPS-system?Syftet med den här uppsatsen är att undersöka om införandet av MPS-system förbättrat de undersökta legotillverkarnas styrning och kontroll av sina verksamheter samt vilka begränsningar de upplever med sina MPS-system.Vi har genomfört personliga intervjuer med våra respondenter på AHAN AB, PNM Plåt och Modellteknik AB i Eskilstuna/Torshällaområdena.