At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

 This report is an evaluation of Peab's purchase and call-off system, PIA.PIA is used to order goods for Peab's construction sites. The background to the work is that users of the system have understood the system cumbersome to use when purchasing goods for construction sites. The evaluation was carried out by the interviews and tests with users of the program, in this case, supervisors and site managers at the company. Ten users of the system were interviewed and eleven people have carried out a test order.The focus is primarily on the test order that users have implemented, which has been clocked and analyzed for time and cost. The evaluation is also a user analysis concerning how the users perceive the program, mainly in terms of usability, functionality and benefits.The result of this report shows that PIA is economically profitable to use for the purchase of goods for construction sites.

Syftet med arbetet har varit att undersöka om en viss arkitektur kan användas för att underlätta utvecklingen av ett Back Office-system till ett befintligt och komplext verksamhetssystem.För att gränsa av arbetet och hitta de delar som var intressanta att fokusera på genomfördes intervjuer med tre olika personer som hade olika syn på ett Back Office-system genom sin yrkesroll. Intervjuerna resulterade i ett antal önskemål för vad man ville uppnå med ett Back Office-system.Arbetet resulterade i en arkitektur som kan användas för att underlätta utvecklingen av ett Back Office-system till det befintliga verksamhetssystemet samt till verksamhetssystemet självt. Arkitekturen har utvärderats genom att man först ställde en mängd krav på den och sedan studerade hur den klarade av en mängd nya krav som delvis var relaterade till de gamla kraven.Alla tester som gjorts visar på att arkitekturen är väl designad och lätt att underhålla samt att den kommer underlätta den fortsatta utvecklingen av verksamhetssystemet och dess Back Office-system..

Platelet transfusions can be necessary during treatment of patients with thrombocytopenia or impaired platelet function. Platelet function in platelet concentrates (PC) deteriorate with storage time. Studying swirling is often used to control the quality of PC?s before transfusion but the method has some disadvantages. Therefore other methods can be useful, for example impedance aggregometry (IA, Multiplate® Analyzer) to measure platelet function.     In this study the change in platelet function over time was examined in buffy coat and apheresis platelets with IA where aggregation had been induced with adenosine diphosphate (ADP) and collagen.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The purpose of this Masters thesis is to compare the scheme structure of two national classifications system, namely the Swedish SAB system and the German ASB. It has been assumed that there are no major differences between the two models of classification systems or the main classes into which documents are placed. The classification theory and subject analysis, which form the basic theory on which my research is based, are taken from Dahlberg, Langridge and Rowley. A comparison of 30 monographs classified in the SAB system Sveriges allmänna biblioteksförening and in the German ASB system Allgemeine Systematik für öffentliche Bibliotheken showed that the classification structure was primarily responsible for determining where a particular document was placed. However, despite the fact that the subject in various documents may be similar, my research will demonstrate that the structure of the two codes also depends on different interpretations of the main subject in a document.

Optimization of soil tillage and crop rotation is important in many aspects, but particularly in maximizing profit margins. Since the economic outcome is usually decisive, it can be interesting to study different combinations of soil tillage systems and crop rotations in order to identify the maximum economic outcome. How a crop functions in a particular tillage system determines whether it is profitable to grow that crop. Different tillage systems affect the soil and its processes in different ways. Reduced tillage often works best on weak-structured heavy clays and on silty clays.

The purpose of this essay was to compare the Swedish and the Japanese pension system and see if there were any big differences or similarities. I was looking for answers to such questions as if the systems were modelled with the problematic demographic situation in mind and also how these two countries had tried to manage the problems. Path dependency was also a central conception when I studied the reforms of the two pension systems. I mainly used literature and Internet sources in my study. There were many books on the Swedish pension system and the debates that had been going on since the 80's.

A business is always dependent on its customers. It is therefore important to ensurethat customers are satisfied with the product and the warranty included.The study was conducted in cooperation with the building contacting companySkanska Sweden. The aim is to use interviews to collect and process experiences in order to answer the question: How should the recovery process in the construction industry be performed to ensure a professional handling of warranty? The results have shaped my conclusions and I have turned them into a proposal that companies in the industry can benefit from. The study indicates that the industry is not geared for a five year warranty, which was introduced in 2004 and 2006.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

Northeast Stockholm is a region developing fast. There is already a great need for new transport solutions for the people commuting to the city, since long queues slow down car traffic and the local railway, Roslagsbanan, needs to be upgraded to attract more travelers. The competitive advantage of rail?traffic over the car when it comes to greenhouse gases and air pollutants is another reason to develop Roslagsbanan.This report investigates the differences between car and train to create a basis for a proposed expansion of Roslagsbanan. Once the proposal is presented, costs, emissions reductions and public benefits are analyzed.