During an endurance riding competition the onset of metabolic disorders leading up to elimination from the race are common. As many as 8,7 % of the horses participating in international endurance riding competitions are eliminated due to metabolic causes such as tachycardia, absence of borborygmi, hyperthermia and dehydration. To prevent the onset of metabolic disorders in the horse the rider must be able to determine the physiological and physical status of his or her horse. This requires good knowledge in nutrition, physiology and performance training. The risk of developing metabolic problems is reduced through the right feeding management and training.

The aim of this master thesis is to gain greater knowledge of interpersonal communication. This study explores on one hand how interpersonal communication can be used as an important part of reference work in a Swedish electronic Synchronous reference service, and on the other how interpersonal communication affects the relationship between user and librarian. By using communication theory and establishing a positive relational contact with the user in the electronic environment, the outcome of the reference encounter can be successful for both the librarian and the user. Furthermore, the importance of recognising relational barriers is of great relevance to the relational contact. The scope of this master thesis is to find what relational factors are used and can be used in the interaction between user and librarian.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as Synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Safe operation of a large Synchronous power system as Nordel is not an easy task.There are several aspects to take into consideration. This thesis focuses on the problems due to voltage collapses in a transmission system.The ability to foresee an upcoming collapse is vital to maintain stable operation of the grid. The grid operator at Svenska Kraftnät (SvK) uses the computer program SPICA to predict the maximum transfer limit at specified transfer sections. SPICA uses actual states from the grid to predict the transfer limitation, and a quarter later a renewed estimate is produced and so on. This means that the operator can se his transfer limits vary every fifteen minutes.Our task in this project is to validate the accuracy of the limitations obtained by SPICA.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells Synchronous and aSynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis.

The study was carried out at the Kungsängen Research Centre, Department of Animal Nutrition and Management, Swedish University of Agriculture Sciences, Uppsala. The technical development in dairy production has resulted in a housing system where feeding and milking is done automatically without human contact, a so called automatic milking system. The motives for utilising an automatic milking system, is to increase the animal welfare and to decrease the need for manual labour. However, the system does involve a change for the animals, among the effects is the deprival or the diminishment of a chance for Synchronous behaviour and the animals have to agree among themselves in which order they use the feeding stations and the milking unit itself. How and if this affects the animals well-being and production is yet to be solved. A possible way to form an opinion on this, is to study the animals ranking order along with hormone profiles and production. The purpose of this work was to study the effect of low- vs.

Följande arbete är en designstudie som har, utifrån information som tagits fram från litteratur, tidigare undersökningar, intervjuer och personas, utvecklat ett designförslag för en online rådgivningstjänst, som är anpassad efter de olika användarrollerna, frågeställare och rådgivare, utefter den kunskap som användarna har kring ämnet men också av att använda webbtjänsten. Syftet med studien var att ta reda på hur gränssnitten kan utformas för att uppfylla de mål som respektive användarroll har med att använda tjänsten. Designförslaget har tagits fram som en del av ett större projekt där cancerpatienter har möjlighet att låna hem en iPad som ska fungera som en tillgång till information och vara ett kommunikationsmedel, framförallt vid den vänteperiod som inträffar efter patienten har fått besked om behandling, fram tills behandlingen börjar, då det inte förekommer några regelbundna läkarbesök. Den del som arbetet har involverats i handlar framförallt om en webbtjänst där cancerpatienter möjlighet till att titta på färdiginspelade informationsfilmer som förklarar hur behandlingen går till, och därefter kunna samtala med en sjuksköterska om det har dykt upp några eventuella frågor. Användarna har möjlighet, som kommunikationsmedel, att använda ett videoverktyg som har varit i centrum av designen eftersom det kan användas för att underlätta kommunikationen mellan användarna, där videoinformationen, som bifogas från de befintliga videoklippen, kan förtydliga användarens meddelande.

De senaste årens tekniska utveckling på datorområdet har även gett återverkningar inom distansutbildningen. Den nya Informationstekniken (IT) har används mest för att utveckla kommunikationen mellan lärare och studenter på distansutbildningarna. I utgångsläget har tekniken alltså används för att underlätta arbetet inom kurserna, inte för att utveckla metoder för hur undervisning ska bedrivas. Elektroniskt lärande (e-learning) kan förklaras som ?Teknikbaserat lärande? (technology-based learning) och innefattar all form av undervisning som sker med hjälp av elektroniska media.