The purpose of this study is to identify how the needs, demands and preferences for a certain service appear among University students in Kalmar. This is necessary to examine in order to create and design a possible service that will solve the problem with the University students eating habits.This study is based on a qualitative method with quantitative elements. The qualitative method contains of three focus group discussions. The quantitative method contains of a questionnaire. All respondents in this study fits in the target group.One important conclusion that we have stated after the investigation of this study, is that the nature of this problem seems to differ from person to person.

AbstractThe tourism industry has evolved to a vital factor for destination development in rural areas. This study aims to see how the tourism industry can be seen as an opportunity for development in rural areas. To be able to develop, rural areas have to be restructured and this study presents the restructuring problems that rural areas usually face and how developing tourism can be seen as a solution to these problems. Five destinations of rural character have been investigated in this study in order to see how these restructuring problems are expressed and addressed through tourism. A key example has been used to provide a clearer image of how these problems and tourism are related to each other and how their interaction can create a positive development for rural areas in Sweden..

IRB 340, Flexpicker is an industrial robot used for sorting, packaging and the handling of details up to two kg. The Flexpicker is a delta robot, meaning that it with three arms controls a triangular plate, swivel, in a work area shaped like a cylinder. Joints using plain bearings connect the arms.The plain bearing in use today consists of a plastic ring which slides against a hard anodized joint ball. Despite the fact that the plastic contain friction-lowering additives, the bearing needs to be lubricated to prevent noise. Because the robot is used in food and drug handling environments, where the demands on hygiene are set very high, the robot is often washed.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

This study is focused on small scale water and wastewater handling in Sweden. The study is divided into two major parts; the first describes common methods for water- and wastewater handling and the second part is a case study on three small and expensive systems in Gällivare municipality, in the north of Sweden. In the case study, abilitys for the local government to hand over unwanted systems to the water users is investigated and found to be a plausible solution to cut costs for two out of the three studied systems. In the third case, water and wastewater systems is not recommended to be handed over but other ways of cutting costs are suggested..

The Chinese government´s aim to be self-sufficient in food production in combination with the increased food consumption in China has put high pressure on the productivity within the Chinese agricultural sector (He j et al, 2010). In order to increase the productivity, modernization and adoption of new farming techniques are essential. The opportunity to adopt and import foreign technology has lately been possible in China, as more authority and decision rights have been given to the individual farmers and the country has opened up for foreign trade (Zheng, 2012 & Fan, 1991). A more open Chinese market enables new opportunities for foreign agricultural companies to expand their businesses by introducing their products to Chinese farmers. But to succeed with this strategy the Chinese farmers must be willing to adopt these, for them new innovations. Minimum tillage is a tillage practice used worldwide that is suitable in northern China where drought and erosion are the main problems in the crop production (pers.com., Arvidsson, 2012). Potential users? opinion of new innovations such as minimum tillage is closely related to adoption (Rogers, 2003).

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s temperature is rising, where the result of it is worldwide disasters.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

In Sweden there are 560 000 disabled people over the age of 16, half of those are in use of some kind of mobility device.Living with a disability means that due to injury or illness you are having trouble functioning without devices or assistance in your daily life and has a big impact on the independence of the disabled user.The everyday life for disabled parents with young children are different depending on the type of disability and mobility device.Today there is no alternative to the stroller for the disabled user who use mobility advises. This causes problems when the disabled person on there own have/want to move the child.The following statement have been the cornerstone for this project: How to make it possible for a wheelchair user to move a child, in the 0-2 year, for longer distances with a focus on independence and safety for both adult children?Due the process, of industrial design, this question and problem have been solved during 10 weeks. The process have contained parts as meeting with users, analyzing, concept development, evaluations, mock-up making, testing, shape & color development etc. This in the end have resulted in a full scale model of the appearance of a proposed product.The result is a stroller witch can be connected to the users specific wheelchair due two one time adjustments.

High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

Today, there are no standardized ways to characterize SOA, many are talking about SOA and many say they are using SOA. One way that we have chosen to characterize this phenomenon is through an evaluation that will indicate whether SOA have been used in the development. Basedon a Service Oriented Architecture literature study, we have created an evaluation pattern resulting SOA principles of integration, architecture and services. This evaluation was applied to Logica's own integration system AgrCom through an empirical study to result in a response indicating whether AgrCom is SOA based. The results of the evaluation show that AgrCom is part of an SOA solution but not an SOA as a whole concept.