This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This project is a contribution in the debate of sustainable city planning. The conceptual ideas in this project can be used on many places and are here applyed on the center of Nacka, outside of Stockholm. The essay is based on an entry in the competition Europan 9, advertised by Europan in collaboration with the municipality of Nacka. The theme of the competition is ?sustainable city and public space?. The discussion of the sustainable city is a very wide subject which needs to be narrowed to suite the context of Nacka.

The purpose of this essay is to explore how I can meet children with different kinds of attention deficit disorders. What can I do when the child kicks me and makes me cry? How can I handle it right so that the child and I can feel good? In my text I am writing about how I can prioritize my way when I am angry. I wonder how to prioritize my feelings and feel safe with the other person. I am developing these questions in my text.

The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

It is statutory that teachers shall document their student's development of knowledge in different subjects. The teachers employed by Sundbybergs municipality have been commissioned to do the documentation in the web-based electronic system Projekt- och Omdömesdatabasen, P.O.D.B. The purpose of this study was to investigate witch effect the IT-solution P.O.D.B has brought for the teachers in their task of student documentation. By conducting interviews and questionnaire studies I have been looking for answers to if the target achievements have increased by using the IT-solution, and if the teachers are aware of what they may or may not write about their students in the system. The conclusions I have been able to draw through my studies are that the teachers have accepted the commission to use P.O.D.B.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

This is an examination that investigates how parental guidebooks advise parents on how to solve conflicts between them and their children. The main purpose of this essay is to examine what these parental guidebooks say about rebuke. The following four questions will help to answer the main investigation. These questions are:What do different parental guidebooks write about rebuke?What do parental guidebooks consider to be the goal of rebuke?Which are the consequences of rebuke according to the parental guidebooks?Are there any clear patterns and connections that can be shown?To find an answer to these four questions, I have used eight parental guidebooks.

Reliable methods to analyze food for the presence of almond are important ? not only for those allergic to almond, but also for monitoring the compliance with labelling regulations (EG directive 2003/89). Until now the Swedish National Food Administration has used methods like rocket immunoelectrophoresis and real-time PCR to detect almond in food. These methods are, however, not sensitive enough for protecting the most sensitive individuals. Therefore, the performance of a commercial ELISA kit was tested with regard to specificity/cross reactivity and limit of detection for almond both in solution and in different matrixes.The limit of quantitation was at least 3,1 ppm (mg/kg) in solution and similar concentrations were measured in bisquits and chocolate.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This Master Thesis is a product development project that has been carried out in cooperation withSvea Teknik AB. The company has developed an apparatus for attachment of a keel to a hull base ofa boat. The purpose for this thesis has been to compare a new concept of keel attachment incomposite material to thetraditionaldesign solution. This new keel attachment minimizes thedamages that may arise on the keel and the hull of the boat in shape of stresses impacts at grounding.Today it is a problem, relating to keel attachment on sailing boats having a fin keel or a bulbous keel.The manufacture focus on developing larger draught and shorter keel blades. The overall purpose isto increase performance of the sailing boat.The task for this thesis was to develop a concept of keel blade in composite material and investigateattachment to a sheet-shaped element.

Syftet med studien är att analysera möjligheter och begränsningar med att använda programvaror baserade på öppen källkod för att förvalta en organisations e-post där utkontraktering inte är ett alternativ. Detta baseras på tio krav som identifierats som relevanta i relation till e-postlösningar. Inom studiens omfattning representeras OSS(Open Source Software)-lösningarna av programvarorna Zimbra Collaboration Suite, Citadel och Kolab Server. För att undersöka styrkor och svagheter hos dessa har hybridmetoden action case tillämpats. Genom ett interpretativt och iterativt närmande har representanterna ställts inför de identifierade kraven och deras förmåga att leva upp till kraven har analyserats.

The aim of this project was to improve taste of a liquid food product, comprising extremelybitter and unpalatable amino acids and one unrevealed ingredient. The amino acids were Lleucine,L-isoleucine, L-valine, L-threonine and L-lysine monohydrochloride. Experimentaldesign was set up as a screening of water solutions comprising these ingredients (called BCAAsolutions) and added ingredients with potential to improve flavour. BCAA solution withingredients that were potential bitterness suppressors were evaluated in flavour, bitternessand/or palatability. Solutions of separate amino acids were also studied.

In a press release from the Swedish church it says that the pressure from people who are in need is increasing on the deacons in Sweden and that it?s getting higher each year. This study contains the search of knowledge about the deacons of the Swedish church, if they actually feel an increasing pressure and in what way, how they are handling the possible pressure from people in need, if that pressure is too high and if the deacons feel that they can assist the people seeking their help. The study also aim to provide more knowledge about the deacons experiences of the opportunities and boundaries (or obstacles) they meet in their line of work and how they handle the boundaries when/if they can?t provide the help that the people need.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.