An important task for Region Skåne is to allocate resources to the health care districts. From 1999 to 2002 Region Skåne used needs-based resource allocation as a model for allocating resources. In a needs-based resource allocation individuals with the same socioeconomic and demographic characteristics are assumed to have the same level of need and are therefore allocated the same amount of resources. During the period of needs-based resource allocation a matrix model was used as a method. In the matrix model individuals were divided into cells after each combination of the socioeconomic and demographic variables.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

Background: Sweden has, since 1983, had a statutory audit for all joint-stock companies. However, according to EG?s fourth corporation directive, member countries can decide on their own if this applies for small joint-stock companies. An investigation was launched in the fall of 2006 to form an opinion on the importance of the audit reporting by law and what an abolishment of this rule would mean for small joint-stock companies. Critics are claiming that the cost of audit for small companies is exceeding the cause in these micro companies.Audit is regulated by Swedish translation (RS) of International Standards on Auditing (ISA) and is to be applied in all companies comprised by the statutory audit.

The purpose of this thesis is to try to understand, with the help of existing theories and empirical findings, the parameters which are of importance in the development of the pricing capability. We have used a qualitative and abductive methodology approach. The empirical findings have been collected via semi-structured interviews which we have conducted via personal and telephone interviews. Seeing pricing as a capability within the company our theoretical framework mainly consists of the resource-based view and an article explaining and given proof how pricing can be seen as a capability. We also describe the most used pricing strategy today within business-to-business companies, the cost plus strategy.

The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

This report is an inventory of the street lighting in half of the residential estates owned by Karlstad Bostads AB, a public housing company. The inventory was made to reduce the environmental impact of the street lighting. From the inventory an estimation of the total installed power and the energy consumption was made. The total estimated power of the street lighting was 125 kW and the energy consumption was 500 000 kWh/year with an estimated running time of 4 000 h/year. The dominating source of light was 125 W discharge mercury lamps.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Efficient energy use in the housing sector is crucial for achieving a sustainable society. The expansion of this sector only represents a fraction of the existing houses, hence it?s within the existing houses the potential for energy savings lie. This potential has been analyzed in order to determine if it?s possible to cut the current energy demand in half.

The task in this thesis is the steering of one of Saab Bofors Dynamics robots using Sliding Mode Control, a method they never used before. The robot constitutes a system which in addition to perturbations and uncertainties due to modeling imprecision, hold the difficulty of being highly time variant. In order to be able to keep required performance with uncertainties and modeling imprecision present, the use of robust control methods like Sliding Mode Control is necessary. SMC is based on the states of the system being forced to stay on or in the direct vicinity of a hyper plane in the state space which is chosen in a way that gives the system dynamics desired properties. Other advantages with sliding mode are reduced order dynamics on the switching surface and total insensitivity to some uncertainties and perturbations.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.