This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

New method for measuring road quality- A statisticalstudy of the relationship between road quality andsocioeconomic development A new tool with implications for road maintenance has the potential to yield statistical data for road quality in a large number of regions. This thesis investigates the possibility to develop a method, from this data, for evaluating the effects of road quality on socioeconomic development.The thesis is essentially divided into two parts. Part one looks to qualitatively establish the link between socioeconomic development and road quality and the second part focuses on how to develop a method for evaluating the effects of road quality on socioeconomic development. A method was devised using categorical data and a multinomial regression model. This method provides a comprehensive overview of the complex relationship between a variety of different variables.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

Transportation constitutes a large part of the forest industry's raw material costs. Transport also contributes a significant proportion of the carbon dioxide emissions. In order to reduce both the cost and environmental impact different types of decision support are required. These, in turn, require extensive information about the road network and correct information on road path selection and transport distances. In the development of national road data base for forestry (SNVDB) a road selection application has been included.

A Road project?s frame is built up of a decision- and consultation process, where the results of the preparatory studies are being discussed. The aim with a consultation process is that all theopinions and knowledge from the operators' will be taken into count in the basis of information, that is needed in order to the different involved operators' to take a decision.The aim of the essay was to investigate how the decision- and consultation process for a road project, the E4 section between Uppsala Läby, turned out. The aim is also to bring up how theprocess could have been done more correctly. The study was carried out through a qualitative method with an analysis of materials from the National Road Administration's archives, the associated Environmental Impact Assessment (EIA) and through interviews of the different operators.My theoretical basis has been a Stakeholder Analysis and its principles, and theory about different executions of social planning.The result showed that the decision- and consultation process has been bursting in democracy and consideration taking of the different operators' opinions, has been poor from the developer?s, in this case the National Road Administration's, side.

This thesis deals with past and present political attitudes towards the Öresund bridge. It describes the decision making process which preceded the construction of the bridge, and has a short historical introduction to it. It then presents the attitudes towards the bridge of five different political parties, all represented by regional politicians. This empirical information was obtained through interviews with politicians and literature studies. The author then analyzes the empirical information with the help of the human ecological triangle developed by Steiner, and the center-periphery theories of Wallerstein and Persson.To conclude, the author describes what the central problem is in the case of the Öresund bridge from a human ecological perspective and analyzes the empirical data collected..

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.

Because of an increasing demand from customers and changing external environment, there is a need for continuous improvements, for both manufacturing and service organizations, to meet these demands. Manufacturing organizations have been working systematically with quality improvements for a long time, but it has not been as common for service organizations. Because of that the methods to use for implementation of the systematic improvements have not been designed to fit service organizations, and not either for public organizations. The purpose of this thesis is to explain if and why the Swedish Road Administration?s organizational culture and handling of ideas and deviation support an implementation of continuous improvement management.

The increased travelling of today makes nodes along travelling routes more and more important. This is very much the case of petrol stations. They constitute important nodes in the road network, filling up thirsty fuel tanks and hungry stomachs, guiding road users and providing vehicle-services. In this thesis the role of the petrol station for road users was investigated in order to find out if the petrol station was a potential hot spot. We performed an ethnographic field study at a petrol station and found that a great number of visitor activities took place at the petrol station.

The purpose of this thesis is to describe and analyse the road towards a modern library in the southern archipelago of Gothenburg between the years 1943 and 1976. The archipelago consists of about thirty smaller and larger islands, of which seven are inhabited throughout the year. Styrsö and the surrounding islands composed a municipality of their own until 1973. In January 1974 it became a part of the municipality of Gothenburg, this is also the year when the only bridge in the archipelago was ready to be taken into use, between Donsö and Styrsö. There is no bridge between the mainland and the islands.