When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

This work derives from the question ?What is a beautiful road??. The question is being discussed in interviews with two employees at the Swedish National Road Administration and two former members of the ?Council of environment and beauty? at the Swedish National Road Administration. The interviews are summarized in my own discussion about the concept of ?Beautiful roads?.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

The study was conducted with an landscape approach with an subject related approach in the field of environmental psychology to investigate how road design affects drivers' choice of speed. The purpose was to portray road environments on thoroughfares in urban areas to motivate motorists to keep the speed limit and thus increase road safety for vulnerable road users. The task question was formulated, how can thoroughfares in suburban settings be portrayed to motivate motorists to reduce speed? The study was conducted throughout a literature review of motivational speed measures along with interviews with road design experts at the Swedish Transport Administration. Case studies were conducted on three thoroughfares in the Stockholm suburbs Vallentuna, Upplands Väsby and Danderyd.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

Assessment of impacts on nature and reindeer husbandry by the considered mountain road between Borgafjäll and Saxnäs- Swedish National Road and Transport Research Institutes method for assessment of damage to heritage assetsThere are plans regarding the building of a new road from Borgafjäll/Båtas to Saxnäs, and two road alternatives have been presented. The road has been localized to an area which is protected as a nature reserve and listed as a Nature 2000 area. This report aims to determine the effects on the Nature 2000 area and reindeer husbandry, and to be a source of knowledge for future environmental impact assessment in that project. In order to assess the impact on nature values and reindeer husbandry a method from the Swedish National Road and Transport Research Institute (VTI) has been used. A literature review has been made to prescribe the effects and consequences.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

Fog is a small-scale weather phenomenon that are fascinating to people. However, the presence of fog in road traffic reduces the visibility and increases the risk of road accidents. By the Swedish Road Weather Information System (VViS), the safety on roads could ameliorate and road accidents caused by fog and other weather hazards could be prevented. Fog is however a complex and usually local phenomenon, why fog formation generally is not easy to predict. For that reason, a statistical mapping of fog, especially along a motorway with high traffic volumes, could be useful in planning to prevent road accidents.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

This report was undertaken at the request of the Management and maintenance department of Swedish National Road Authority (Vägverket Region Sydöst) in Jönköping.In 1992, the management and maintenance of Swedish roads were laid out on external constructors. When putting out a tender for the work, the foundation is from a national set of rules which are in constant change. This report is limited to winter road upkeep.The trend in the invitation for tenders is that it is moving from the more conventional executional demands towards the less controlling demands. The downside of functional, less controlling demands is that it is difficult to articulate how to measure them. The order authority therefore has to find ways to make sure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the new set of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rules are and how these changes affect the organisation and activities of the constructor.It is also studied how the changes in execution is perceived by road users and how it affects the possibilities of the constructor to come as a newcomer to a new area of administration.Interviews and examination of sets of rules has led to a list of a number of changes that the constructors feel affect their work in any sense.Views from road users that have come in to the order authority have been scrutinized to see how they have experienced the change.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible. The stationary resistance bridge had been examined through various kinds of measurements to be able to see how stable the system is and how to obtain a measure value as optimized as possible.

AbstractThis report was undertaken at the request of the Management and maintenancedepartment of Swedish National Road Authority (Vägverket Region Sydöst) inJönköping.In 1992, the management and maintenance of Swedish roads were laid out onexternal contractors. When putting out a tender for the work, the foundation isfrom a national set of rules which are in constant change. This report is limited towinter road upkeep.The trend in the invitation for tenders is that it is moving from the moreconventional executional demands towards the less controlling demands. Thedownside of functional, less controlling demands is that it is difficult to articulatehow to measure them. The order authority therefore has to find ways to makesure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the newset of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rulesare and how these changes affect the organisation and activities of the contractor.It is also studied how the changes in execution is perceived by road users and howit affects the possibilities of the contractor to come as a newcomer to a new areaof administration.Interviews and examination of sets of rules has led to a list of a number ofchanges that the contractors feel affect their work in any sense.Views from road users that have come in to the order authority have beenscrutinized to see how they have experienced the change.

The use of gabions means a reduced amount of filling material in the road section and a more narrow construction. Also the use of limestone cement columns can be reduced. All together this results in lower costs. The columns stand for about 55% of the total costs for the road. If gabions are used you can reduce the total costs with over 10%..