Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

På operativ och högre taktisk ledningsnivå inom den svenska Försvarsmakten användsidag ledningssystemet Sweccis, Swedish Command and Control Information System.Detta system kan användas till planering och genomförande av insatser inom riketsgränser. Sweccis samlar ett antal funktioner, exempelvis en kartfunktion, ettgeografiskt informationssystem, en logistik-funktioner och en portal förinformationsspridning, i ett system. Till skillnad från tidigare system som använts förledning på högre nivå inom Försvarsmakten är Sweccis ackrediterat för att hanteraHemlig/Secret-information.Sweccis syftar till att möjliggöra funktionen ledning på operativ och högre taktisknivå, i enlighet med de doktriner som Sverige idag använder. Målet är att samordnafysiska faktorer, exempelvis våra arméförband, för att genomföra aktiviteter som skallleda till effekter hos motståndaren. Dessa effekter skall sedan kunna utvärderas för attanvändas som grund för ett kommande genomförande tillsammans med yttre faktorer,så som en ny uppgift från en högre chef.

The purpose of this thesis is to discuss the possibilities of, and interest in, a digital download service at the music departments of the libraries. I chose to conduct my study at the city library of Gothenburg. I studied the legal download services that exist today and I did a statistical survey among the users of the music department, followed up by interviews to see how they took to the idea. From the inquiry I learned that a majority of the users was negative to having a digital service replacing the physical department, although a majority was positive to try a digital service. I also used the inquiry to compare the reasons for downloading music to the reasons for borrowing records from the library, but there was no significant difference.

When traffic in large cities increases, it becomes more vulnerable to disturbances such as accidents, stalled vehicles or construction; therefore, traffic jams are more likely to occur. For better control of the traffic at a disturbance the Swedish National Road Administration (SNRA) has traffic equipment which can be controlled from a command centre. This traffic equipment consists of gates and signs with variable messages. This report will discuss the system used for traffic control in Stockholm. It will present proposals designed to improve it.

A new system of public transportation that can simplify and shorten the trips made throughout the city, anddo that both cheap and environment-friendly. Sounds like good news. This new system, though, require anall new type of infrastructure, differing from what we are used to see in our cities. Podcar, or PRT, as thesystem is called can become a transport revolution, possibly. If that revolution does happen it is crucial that webeforehand have studied the possible effects it can cause on our city environment, from a spatial point of view.This thesis thoroughly describes the function and essence of the PRT system and presents what is availabletoday and in what forms.

Integration av system har varit ett aktuellt område under de senaste åren. Det har då främst handlat om integration av system internt på företag. En av anledningarna till det stora intresset av web services är möjligheterna att integrera olika system, exempelvis stordatorbaserade och Windowesbaserade system med varandra. Web services handlar om att kunna integrera system, både internt på ett företag och externa mellan olika företags olika typer av system. Allt detta görs via Internet och bygger på att man utgår i från standards när man bygger web services.

Swedish Armed Forces are according to their development planning process taking actions to establish a new joint unit (SWEWOSE), with electronic warfare capability. SWEWOSÉ S main task will be designated to produce electronic warfare libraries for electronic warfare systems within the armed forces. The unit shall have capability to support with libraries in any state of conflict situation even if the supported unit with library needs conducting operations abroad.This essay examines the requirements that justify the establishment of a new unit in times when the armed forces conducting reorganizations and cutbacks in both economy and personnel.The possibilities to buy complete system solutions from an external supplier are examined. But also what kind of library support model that is to prefer according to the demands that the Swedish Armed Forces desired, in terms of capability in platform protection and battle space awareness.The results show that the demands that the Swedish Armed Forces has decided, best will be ful-filled and justified by a national electronic warfare unit, with library production as a main task..

Interest deduction limitation rules have an important function as the regulations prevent the Swedish tax base to decrease. However, the restrictions must not be at the expense of the business environment. Interest deduction limitation rules that do not work in a satisfactory manner are likely to make Sweden a less favourable country to establish in. The first Swedish rules which were aimed to restrict interest deduction threaded into force in 2009. The rules were applicable to intercompany loans related to acquisitions of part ownership rights and the aim was to reduce tax avoidance through corporate group-loans. The rules proved to be ineffective since the avoidance continued and the Swedish rules could not tackle the problem.

Uppsatsen undersöker den svenska marknaden för CRM-system utifrån faktorer som företagskategori, kundrelation, befintligt kundrelationsstöd m.m. Vilka funktioner i ett system som företagen uppskattar mest undersöks också samt hur faktorer typiska för mjukvara påverkar situationen.Resultaten visar att det finns ett behov bland små och medelstora företag för CRM, dock inte för alla företag. Många företag använder egenutvecklade system, kanske för att de kommersiella systemen inte motsvarat deras behov. Funktionsmässigt uppskattades grundläggande funktioner mest, och fördelningen mellan CRM-områdena var jämn. Gällande mjukvarukaraktäristik ser företagen funktionaliteten som den primära faktorn i deras val av CRM-system.Det är en klar fördel att kunna erbjuda ett system på det nationella språket..

Interference in an ecosystem means a disturbance. When harvesting, forest roads have to be build to cope with heavy duty vehicles. Crossing brooks can not always be avoided. In this case bridges or culverts have to be built. There are many different kinds of culverts and depending on what type you choose and how you place the culvert, the watercourse and the water organisms can be harmed in different ways.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database. Although Ruby on Rails was completely new to me, I decided to use this framework instead of PHP, which I already have a good knowledge of, because of the benefits Ruby on Rails provide.

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

The paper aims to examine how well a small group unaccompanied children have established themselves in Swedish society. In order to determine how well they have established the empirical material which is primarily based on quantitative data has been measured with a theoretical model developed by the theorists Nancy Fraser and Alistair Ager and Alison Strang. Based on the theoretical framework the unaccompanied children establishments have been measured in example income, education, debts with Kronofogdemyndigheten and social network. It was found that the unaccompanied children had not achieved the establishment in the society that was expected from the theoretical framework. Their results were also generally below the national average for young adults in Sweden who are the same age.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.