This study is commissioned by the Swedish University of Agricultural Science (SLU - Department of Forest Resource Management) in coorporation with Sveaskog and Vilhelmina Norra Sami reindeer herding community. The purpose of this study is to analyse movement patterns and habitat use of reindeers during two winter seasons (2005/2006 and 2006/2007) in areas affected by forestry activities such as clearcutting. This study examines the possibilities of analysing information from Reindeer husbandry plans and forest variable data from kNN and SMD, in relation to GPS collar points from reindeers by using Geographical Information System (GIS). Lack of knowledge and understanding between the reindeer industry and the timber industry has often led to heated debates. The possibilities of using this type of technique are very interesting and could increase knowledge concerning land-use issues to different resource users. The main results from analyses comparing SMD, kNN, data about clearcuts, and GPS collar points from reindeers indicates that clearcut areas, younger forest, coniferous forest on lichen-dominated areas and areas dominated by pine was preferred by reindeers during the winter period.

Bakgrunden till detta arbete är att Bioenergi i Luleå AB måste tillmötesgå kundkraven för att behålla sina marknadsandelar och ha möjlighet att utöka dessa. På senare tid har de stora kunderna börjat efterfråga bränslepellets som är certifierad enligt Forest Stewardship Council, FSC. Examensarbetets syfte var att hjälpa Bioenergi med framtagandet av en Forest Stewardship Council Chain of Custody certification. I den inledande kartläggningen användes i huvudsak intervjuer och observationer för att studera de anställda och tillverkningen. För att identifiera aktiviteter och brister i Bioenergis system studerades även interndokumentation och relevant litteratur.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

This report is part of an Bachelor of Science work in forestry, conducted for the community of Borås, Sweden. In order to create a forest management plan for the area of Hestra, a survey was conducted. People living in the area were given the opportunity to reply to the survey. The questions in the survey are both personal and forestry-related. The aim is to reach out to the different categories of people when it comes to age, living and the different aspects of visiting the woods.

Forestry in Sweden is currently conducted in a manner aiming at equating the production objectives and the biodiversity. To ensure that biodiversity is maintained, patches that are considered to be valuable now or in the future is saved in final fellings. How the tree retention areas will grow into the future forest stands is yet unknown.The purpose of this study was to visualize how different scenarios of natural consideration taken at final felling will evolve in a long term perspective, for two rotation periods. Projections of the forest conditions were executed with the decision support system Heureka and its applications PlanStart and PlanWise. The information about the projected forests was then used for the visualizations which were created in the software Visual Nature Studio.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

Soil organic carbon (SOC) stocks and fluxes in forest ecosystems are influenced by natural and human disturbances. In the tropical regions the highest impacts on disturbance in forest C cycles are related to human activities such as conversion of natural lands to cropland and pasture areas and to forest plantations. The disturbances in the forest C cycles will release CO2 emissions to the atmosphere triggering global warming. In this study the focus was set in subtropical soils in Brazil, south extreme region of Bahia. The aim of the study was to investigate whether reforestation of Eucalyptus plantations under former pasture areas will help mitigate climate change through carbon sequestration.

Title: Mountain birds ? a comparative study from valley to mountaintop in a northern and southern Swedish fjeld  Author: Kristian Zackrisson Abstract Main aim in this study was to increase the knowledge about birds in the Swedish mountain area. Three questions were asked: 1) Which bird species can be found during the breeding season along a low mountain slope from a forested valley to a mountaintop with bare mountain environment? 2) Do the number of species and individuals differ in different elevation zones? 3) Is the composition of bird species along a low mountain slope the same in the Kebnekaise mountains inLaplandand the Grövelsjön mountains in Dalarna? Bird census in two study sites located in the Kebnekaise mountains and the Grövelsjön mountains and subsequent analysis of the results from the bird census was the main parts in this study. Totally 20 bird species were found along a low mountain slope in the Kebnekaise mountains.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..