The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

Resultaten visar på att abnormal earnings model är en mertillförlitlig modell i förhållande till dividend growth model. Dettafrämst då abnormal earnings model grundar sig på mer tillgängliginformation samt att tillväxträntan i dividend growth model harkonstaterats vara orealistiskt hög. Analytikers prognoser tenderaratt vara optimistiska i början av undersökningsperioden 2000-2002. Perioden 2003-2007 präglas mer av pessimistiskavinstprognoser. Marknadens riskpremie fluktuerar mindre underperioden 2005-2007, vilket kan förklaras utav införandet av IFRSår 2005..

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

This study reflects on the swedish model and the models future. The swedish modelmeans that legisilation acts with the collective agreements . The wage issue is notregulated by law instead it is managed by the social partners in the form of collectiveagreements. In 2008, a report was presented by the Commission on a joint regulation ofthe minimum wage for all EU countries. The issue has become increasinglycontroversial and was especially disccused for the election of candidates to theEuropean Parlament last spring.

Accounting has been critized for being one of the leading factors in the latest financial crisis. One of the primary problem areas was identified as delayed recogonition of losses on financial instruments. Consequently, a new impairment model is being developed and is to be namned expected loss model. The difference from the present model, incurred loss model, is that it takes losses into consideration on an much earlier level. Even though the model may be theoretically feasible, in practice it may implicate a number of issues.

Bachelor thesis, Business Administration and Economics Programme, School of Business and Economics at Linnaeus University in Va?xjo?.Spring of 2015 Title: Performance measurement from a cost leadership perspective - A case study on Gekås.Authors: Adrienn Csiszer, Hannah Lundberg & Helena WennerströmTutor: Eva GustavssonExaminer: Karin Jonnergård Keywords: Performance measurement, Performance measurement systems, Generic strategy, Cost leadership strategy, Financial and non-financial measurements. Purpose: The purpose of this study is to examine how a company with a clear cost leadership strategy chooses to work with performance measurements, with a view to comparing a practical example to theorethical approaches. Methodology: The method chosen for this paper is a case study on Gekås AB. The presented data were collected through interviews conducted with four employees on Gekås. Conclusion: The study concludes that for a business with cost leadership strategy the financial measurements are more important than non-financial meausurements. For Gekås it is important to keep the performance measurement simple and understandable for the employees. They only use three measurements (sales, hours and sales per hour) in planning and in evaluation.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

Cycling is one of the most sustainable transport modes available and it is widely promoted inmany urban areas. The health benefits from cycling has shown to be substantial, includingdecreased risks of diseases related to overweight and enhancing brain capacity. However, inurban areas cyclists can temporaly be exposed to high levels of air pollution, resulting inhealth risks as opposed to health benefits.The objective of this thesis is to develop a rasterbased test model in GIS that estimates theinhaled dose of air pollution for cyclists based on relative particle concentration in differenttransportation micro-environments. The method used is a least-cost path approach,calculating three different routes; shortest, fastest and least dose for four different trips withinSödermalm, Stockholm.The results show that the inhaled particle dose can be greatly reduced, 39% - 58% for three ofthe routes, by choosing the least dose route. One of the most interesting findings is thesubstantial increase of dose when high levels of particles are combined with uphill cycling.The conclusion for the thesis is that a raster-GIS model can be very useful for estimating doseof different air pollution particles and chemicals along cycling routes.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.

In this essay we strive to examine how the social work in Sweden will be affected if the Swedish welfare model goes through fundamental changes. The study illuminates the close connection between the Swedish collective bargaining model and the Swedish welfare system. The questions we present in this essay, and hopefully answer satisfactory, are: is the Swedish welfare model subject to thorough changes? How will such a change alter the social work in Sweden?, is the Swedish collective bargaining model in a state of modification? Would a modification in the collective bargaining model have effects on the Swedish welfare model?We have used a qualitative method in collecting empirical material. We interviewed three representatives, who worked for Confederation of Swedish Enterprise, IF Metall and The Swedish Municipal Workers respectively.