The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

Pets like dogs and cats have a considerable importance for humans and research demonstrate a variety of positive economic and social effects in society due to our pet companions. The presences of pets are increasing on a global scale with correlation to economic development in low- and middle income countries. For example dogs have doubled in India over a five year period. The feed industry for dogs and cats is also the fastest growing sector in the food industry and certain pets have a significant animal protein intake which, depending on the choice of resources may provide a high ecological footprint. Examples of environmental effects with distribution and manufacturing of pet food are increased greenhouse gas emissions, waste, use of water and energy.

Half of Sweden?s 140 000-150 000 sows are culled and replaced by 75 000 gilts annually. Culling of old sows is necessary and allows new breeding material to enter the herd. However, many of the culled sows are young, and have not yet become profitable at the time for culling. Therefore, it is an important question for the pig industry, how to raise gilts to sows with a high and Sustainable production level.

Sustainable destination development has in recent years become an increasingly important concept for tourism destinations. A destination must take into account the environment if it wants to continue being a successful tourism destination in the future. This essay investigates what needs to be developed on theislandofSandhamnfor that the destination can be more attractive in the off season and how the players on Sandhamn integrate to develop Sandhamn in a sustainable manner. One market research and interviews with five different players were made. Through these interviews grew an understanding for how the cooperation between the municipal and the private party looks like and how the history of Sandhamn is the foundation for the islands tourism development.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Palm oil has been used in processed food commodities since the 19th century. An increasing demand for regulating and ensuring a more sustainable palm oil production has resulted in various initiatives. However, these initiatives have received critique due to lack of compliance and insufficient revisions of palm oil plantations. The initiatives for creating an ethical, social and environmentally Sustainable production are not sufficient for the Swedish industrial users of palm oil. As a result, stakeholders such as Swedish food processing companies, commit to ethical sourcing codes of conduct that go beyond the international palm oil initiatives.

Humanity faces a major challenge with the climate and environmental crisis, largely driven by reckless recourse use and greenhouse gas emissions by corporations. The EU?s Corporate Sustainability Reporting Directive (CSRD) aims to standardise corporate sustainability reporting, making practices more transparent and comparable. This directive seeks to enhance sustainability practices and guide market forces towards sustainability, supporting the EU?s goal of net-zero emissions by 2050.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

 This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

Miljön har blivit en stor del av samhällsdebatten och en stor mängd information om klimatpåverkan finns tillgänglig för den intresserade. En hållbarhetsredovisning är företagens sätt att visa sitt miljöengagemang och i den redovisas en mängd data. Sustainable Value-metoden anses av många vara en av de bättre metoderna att ta till vara på dessa data. Metoden använder företagens egna uppgifter om miljöpåverkan för att jämföra företag med varandra avseende hållbar utveckling.Syftet med uppsatsen är att utröna hur användbar Sustainable Value-metoden är genom att applicera metoden i en undersökning på företagen på Stockholmsbörsens Large Cap-lista med fokus på företagens koldioxidutsläpp. Resultatet av undersökningen visar att företagen redovisar väldefinierad utsläppsinformation i större utsträckning än för bara några år sedan och att det idag finns tillräckligt med information för att en undersökning med Sustainable Value-metoden på Stockholmsbörsens Large Cap-företag ska vara meningfull att genomföra.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Background: The situation for Swedish agricultural production today is characterized by an increased competition, particularly after the country joined the European Union. Swedish agricultural production laws guarantee safe, high quality foodstuffs. However, due to these strict laws, Swedish farmers face higher production costs than their competitors. Meanwhile, cheaper imported goods compete freely on the Swedish market. Swedish agricultural production must find new ways to survive in the increasing competition.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.