Climate change is an increasingly widely known concept. In the EU the construction sector is responsible for more than a third of the carbon dioxide emissions and 40 % of the total energy use. In Sweden, measures have been taken to prevent this climate change. By 16 targets, three of which can be linked to the construction sector, Sweden will reduce the negative trend. None of the three goals with relation to the construction sector will however be achieved before 2020.

This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

This thesis examines the verification of the terms and conditions stated in contracts based on the Public Procurement Act. In March 2013 the Swedish state procurement commission released " Good Business - A Strategy for Sustainable Public Procurement " (SOU 2013:12), which found that the proportion of control and verification is relatively low. The thesis examine how verification is carried out and looks for an explanation to why verification is not more oftenly performed. To answer these questions two care studies, based on seven semi-structured interviews, is presented as the empirical material. Network theory has been used to analyse the empirical results, and aspects of commonly used theories such as contract management and "Markets and Hierarchies" by Williamson has also been taken into account.

This thesis conducted at the University of Uppsala investigateshow well a prefabricated building component from the manufacturerMasonite Lättelement AB can be incorporated into ahouse projected to accomplish the demanding criteria of a passivehouse. The thesis is organized as a comparison betweenthe prefabricated elements and an on-site built component fromthe passive house area of Oxtorget in Värnamo, Sweden. Theaspects investigated were air leakage, energy, moisture, economyand noise conditions.Results of the comparative analyzes shows that the prefabricatedproducts were capable of accomplishing the requirementsof passive houses and therefore this thesis should beviewed as a basis to confirm that the technology of prefabricatedbuilding components today in Sweden are mature enoughto be a significant part of the passive houses that are to be builtin the near future. The development of prefabricated technologyis of crucial significance if we are to accomplish the goalsof reduced energy consumption by the year 2020..

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

The way we design our cities today will affect the living conditions for future generations. Planning as a discipline can become crucial to attain a sustainable urban development with an increased quality of life among the urban population and an improved environment. Urban Agriculture in the Sustainable City -a case study in Managua is a Diploma Work that deal with poverty issues, aspects of sustainability and development work. We have had a theoretical starting-point, but our focus has been on the case study i.e. the practical part, that we carried out in Managua, the capital of Nicaragua. Today about half of the worlds 6,3 billion people live in cities. The demographic growth of the countryside has declined, while the population in the cities is considerably increasing.

The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

Increased consciousness about environmental and sustainable issues has led to consumers and companies who are more in favor of reuse and recycle. Even though this is a fact, people today are buying new things more often compared to before. For instance for a mobile phone the functionality lifecycle is eight years which can be related to the economic lifecycle today which is 1.5 years compared to 3 years in 1995. Only 1-2 percent of the mobile phones thrown away in Sweden today are handed in for recycling. The purpose of this study is to investigate whether an international company within the recycling and reuse of mobile phone industry has a market in Sweden.

Portable is a project with its starting point in plastic bags, how they negatively affect our planet and how people´s patterns of behavior and qualities of life are affected when people try to live more envi¬ronmentally friendly. Now we have reached the point when peoples way of living and consuming in the western world has to change. This is nothing new and we can now see that sustainability is start¬ing to get attention in every area.Today plastic bags are used on average for 12 minutes. Only one out of 200 is reused, and then only once . This is not sustainable at all.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

Studenter är bland de som konsumerar mest alkohol i Sverige. Hög alkoholkonsumtion och extern akademisk locus of control (ALC) har liknande negativ effekter på studier. Denna studie undersökte relationen mellan alkoholkonsumtion, ALC och alkoholrelaterade studieproblem. 120 studenter, varav 91 var kvinnor, deltog genom att besvara en enkät bestående av The Academic Locus of Control Scale for College Students, the AUDIT Alcohol Consumption Questions och en egenkonstruerad skala som mätte alkoholrelaterade studieproblem. Data analyserades med en 2 (riskbruk/ickeriskbruk) x 2 (extern ALC/intern ALC) ANOVA för oberoende mätningar.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The construction industry has demands on energy use in permanent buildings. How much energy that is permitted to use during the time the building is produced has no requirements. The purpose with this study is to learn how far Skanska has come with the work of making the building site more energy efficient.A literature study has been performed in the beginning of the study to survey what energy efficient arrangements that can be applied and how they operate. Using site visits and interviews the situations on the building sites have been studied as well as the energy efficient measure that are in use.Skanska has come a long way with the work of energy efficient building sites and they keep improving. They have improved half of their cabins so they use 50 % less energy.