Insecticides will be removed from Swedish forestry, at present insecticides are used to treat our seedlings to avoid them from being attacked by pine weevils. With the forthcoming ban on insecticides alternative protective measures will have to be tested. Holmen Forest Ltd has aimed to find an alternative and have developed a mechanic pine weevils protection accessory as well as a new concept on planting pipes. Studies have been conducted on the behalf of Holmen Forest Ltd to see how planting with the newly developed mechanical protectors and plant pipe stands up against the conventional methods used today. The study was conducted over a three week period. Three factors were compared regarding planting quality including i) pressure around the plant, ii) the depth the plant ended up in, iii) plant angle. Mechanical plant pipes were used in the study, and where tested like a one-handed and a two-handed pipe. The study concludes that further development is needed for the mechanic plant protector to live up to the speed and quality of conventional methods.

To reach an Ecological Sustainable Development, Sweden has established environmental quality objectives. Green spaces are attractive for exploitation and in Sweden the access to large jointly green spaces has decreased, which has impact on humans recreation and the biodiversity. The economic aspect has great impact on the planning process which gives indications that the environmental objective may collide with other sector goals within the municipality. The thesis overall aim is to see how the management by objectives for the green spaces implements and how the green spaces is handled in the planning process in a specific case. The thesis builds on a content analysis, strategic interviews and a case study.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

The goal of this essay was to study if the way gaming review sites presented their review evaluation has any influences the level of product involvement in the users it attracts. The assumption we did during the essay was that there was a connection between user?s level of product involvement and the quality of the community. To test this assumption we started out by performing observations on the comment sections in three gaming news sites which varied in their method for evaluating games. The result of these observations showed a significantly higher community quality in one of the websites.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

To be educated in global climate issues can be challenging for pupils. This may contribute to anxiety and feelings of helplessness. Global climate change may also be a challenge for educators to convey to young learners, f-3. Educators can experience various problems when it comes to teaching about climate issues. The subject of climate change is a broad and complex area, according to the studied material in our thesis.

The main purpose of this study was to examine how preschool teachers are working to promote each child's language development and whether they can ensure that they do that. Therefore I wanted to find out what a good language development implies for each teacher, how they work to promote each child's language development in daily practice, how they measure the actual language development and also what conditions the teachers have, to engage in a language development way to work. For the study, I chose a qualitative method, with structured interviews and all together I interviewed six preschool teachers, within the same organization in a suburb close to Stockholm.  The results showed that there is an ambiguity, among the preschool teachers, in what a good language development means, but it can be stated that they do have a language development way to work even if it needs to be developed. Further on, it has emerged that the teachers have the tools to measure children's language development, although they do not have the conditions yet to use the method to the fullest. About the preschool teachers own conditions in order to operate in a language development way to work, I concluded that they have a strong foundation to build on, but they still have much work ahead of them.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

Vikaholm är en fantastiskt trevlig plats med många fina natur-, kultur-, och rekreationsvärden. Platsen gränsar till stadsdelen Teleborg i södra Växjö. Examensarbetet beskriver hur det är möjligt att inrätta bostadsbebyggelse i ett sådant område utan att förstöra dess stora värden. Arbetets intention är istället att bostäderna skall integreras i platsens stora värden och därmed göra platsen mer tillgänglig för flera av stadens invånare..

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

The market for management training programs is growing and the supply of the service is increasing and getting further diversified. A consequence is a market with a wide variety of definitions of the very concept of development, and subsequently a wide variety of practices and methods to achieve development. The individuals that are subject to these programs seldom know what they are purchasing, or what to expect. When assuming a transfer of the developers view on development to the subject, a need for a greater understanding of the concept arises. The purpose of this thesis is to understand what views on development do exist among management trainers and map underlying dimensions of the views to increase the understanding of the concept of development.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

The following report is based on the graduate job course in CAD technician program year two. The work reflected in the report is done in collaboration with Hans-Erik Eldemark. This work includes the development of a progress bar for dishwashers.The execution of the thesis has involved a list of criteria with conditions and requirements, which after where weighted in a matrix. Subsequently, the product proposal was developed and has been divided into three categories, twist mechanisms, attachments and exterior design. Finally, suggestions have been designed in CATIA V5 and prototypes were produced using 3d-printing.

There are numerous questions to be asked when your task is to plan a small community?s future development. Is it possible to suggest something new and modern? What considerations should be taken concerning the existing situation? What is an appropriate size for the new development? Where is it possible to build and what is the most appropriate method to use?In this master´s thesis I have tried to develop and describe a working-process where I execute a complete landscape character analysis for the whole community in question to get the answers to where and how it would be most appropriate to develop a village like Flädie without destroying its current character.Flädie is a typical small village in the countryside of Skåne, Sweden. It is strongly effected by the expansive and urban region it?s located in but is still rural in character.

Technology has grown rapidly in recent years. At present, almost all social interaction are through computers and telephones. It is, however, not everyone who can manage these media. This applies mostly to elderly people who have not kept pace with technological developments. A major contributing reason is that the manuals are usually bulky and too technical for this group.The purpose of this paper is to develop a concept/prototype into a product that will facilitate the use of mobile phones for seniors.