In order to facilitate design and maintenance of such a large and complex site as a nuclear power plant, all system functions must be described in a stringent way. In the past, these descriptions consisted of text documents and logical diagrams, but today there are an increasing number of object-oriented programs available on the market which might be used for this purpose. This Master Thesis has made a closer study of one of these programs named Rational Rose. The principal of the program is to facilitate software design and development, not to create models of plants. However, using the program the same way as developing software, specifying actors then gradually extend the model with use cases, use cases diagrams etc, the same methods can be used when modelling plants.

This work is a GIS study of fishing rights distribution between different categories of ownersand properties in the Stockholm Archipelago. The purpose was to create basic data used toestablish fishing laws and restrictions within the Stockholm County.Stockholm?s archipelago consists of a unique environment and is the natural life andreproduction environment for ? of Sweden?s reproducing fish species. The increasingpressure from fishing, tourism and weekend population increases the need for an efficientfishing administration to prevent impoverishment and to ensure the biological diversity inSwedish fishing waters. There is an increasing need to review fishing administrationmethodologies, as well as studying the categories of ownership and properties located insensitive areas and areas influenced by physical disturbances in order to establish effectivelaws and restrictions.The Swedish fishing rights for an area are currently not connected to the ownership of theproperty to which it belongs.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Municipalities in Sweden are responsible for physical planning by developing a general plan. This plan contains intended land and water use for the area. This study aims to investigate the level of integra­tion of environmental issues in the general plan of Arboga municipality and also how well adapted the municipality is for climate change. Further on, the study intends to examine the focus of the gen­eral plan and at what rate the national environmental strategies are implemented in the local physi­cal planning of Arboga municipality. Methods used for this study are interviews and reviewing of the general plan itself and other key documents.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

Examensarbetets mål är att rengöra en diamantkomposit med en ytrengöringsmetod. Metoden skulle vara mera effektiv än den manuella sandblästring som används idag för att ytrengöra detaljen.Detaljen är liten och har ett vitalt spår som ska rengöras. Detta ställer höga krav på effektiva metoder. De metoder som tas upp teoretiskt i examensarbetet är bland annat blästring, trumling och laserrengöring. Ett urval av metoderna testades.

The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

During the 1994 Italian elections many things were new for the voters. A new election system, new parties emerging where old traditional ones were dying out because of long ongoing corruption scandals that were coming up to the surface. In all this one man, Silvio Berlusconi, a famous Italian businessman, stepped in and with his two allied parties Lega Nord and Alleanza Nazionale he swept away the nation in a never before seen election campaign. Many things have been said about the motifs and the way he prosecuted the election campaign for the Forza Italia. But what I try to see for this thesis is the awereness in the Italian print media from this particular period - how and if the debate about an in just electoral campaign existed in the country from the date Silvio Berlusconi entered ?the playing field? as he called it and up to the days of election..

Local charges may induce people to change their pattern of consumption by influencing investments and acts in certain directions. Some charges could for example give people incentives to use less natural resources. This study investigates four different local charges and whether they benefit an economical management with natural resources or not. This is carried out by investigating whether there is a polarity between local charges that may influence environmental actions or goods, and effective pollution control set to achieve certain nationally determined environmental goals. The study includes two economic perspectives and investigates on the one hand whether local charges counteract governmental subsidies and on the other hand whether the charges vary between the different municipalities since large differences may lead to cost inefficiency.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.