The purpose of this thesis is to examine and analyze how to improve the design of a Microsoft Surface SUR40 application. The application in focus was an interactive product browser developed by the company Spree, our external client. Spree is a multi-touch software provider, established in September 2010 and they expressed a need for suggestions for how to improve this application. Our work aimed at revealing how to make the application more suitable for several users and make it easier for them to interact simultaneously on the surface. From a qualitative standpoint we have examined how 17 users experienced the application.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary flow of a fluid that was assumed to be Newtonian were performed. The mass flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

Examensarbetets mål är att rengöra en diamantkomposit med en ytrengöringsmetod. Metoden skulle vara mera effektiv än den manuella sandblästring som används idag för att ytrengöra detaljen.Detaljen är liten och har ett vitalt spår som ska rengöras. Detta ställer höga krav på effektiva metoder. De metoder som tas upp teoretiskt i examensarbetet är bland annat blästring, trumling och laserrengöring. Ett urval av metoderna testades.

The surface finishing technique called black oxidation is currently being used on thetool holders made of low alloyed tool steel produced by Sandvik Coromant. Blackoxidation isn?t considered a sufficient technique because it doesn?t make the toolholders look like the quality products that they actually are. The reasoning behind thisis that the tool holders can show signs of corrosion after prolonged storing times orin countries with high humidity and temperature. The corrosion doesn?t decrease thetool holders performance, but the customers might believe otherwise.

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.

Planet rendering plays an important role in universe visualization and geographic visualization. The recent tools and methods allow better data acquisition, usually with very high resolution. However in computer graphics, there is always the limitation on the resolution of geometry and texture due to numerical imprecision. Not many applications can handle high resolution data effectively.This thesis introduces, Implicit Surface Scene, a level of detail scene management inspired by dynamic coordinate system and SCALEGRAPH? which change over time depending on the current camera position relative to the planet surface.

This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

Surface lift adapted for today?s user Today?s T-bar lift looks almost the same as when it was launched in 1938, even though a lot has happened in the ski and mountain industries. New equipment has developed without any major adjustment to the lift. Snowboard, sit ski and downhill biking are just some examples of the evolution that demands new seating positions. It?s also very common for families to spend their holidays in the mountains nowadays.