The purpose of this essay was to enhance the understanding and knowledge about phenomenon access support. Access support means that a third person (contact person) must be present during access visits between a child and its parent, if it is necessary for the child?s security or because the child needs support. The study was based on qualitative interviews with four contact persons and two professional social workers, whose main task have been to support and, partially, coordinate the work of contact persons. During the interviews I put the focus on participant?s experiences and thoughts about the phenomenon access support.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

Thesis purpose: The purpose of this thesis is to make a contribution, by connecting the transfer of meaning within the context of TV series. The meaning is transferred from the brand to the character in a TV series and then further to the viewer. To look at different role functions that are used in dramaturgy and narrative techniques, we will be able to see how the brand will have a specific role and thereby make the transfer of meaning more successful and effective. This role will have an important impact on product placement according to the meaning that will be transferred from the brand to the viewer, through the character. Methodology: By looking at the transfer of meaning process that is created from the brand, an unstructured observation is applied where we observed the placement and usage of different within a specific TV series.

The main aim of this bachelor thesis is to describe through a quantitative study the extent of support received by foster families, their opinion of the support and any areas that might need improvement. The foster families receive foster care support through a private agency. We concentrated on the following areas of support; education, health, contact with the children?s biological relatives and behavioral difficulties. These four areas have, in previous research, shown to be problematic for foster children.

The aim of this masters thesis is to learn how an organization has solved its information management via intranet and document management. The purpose is to identify what different types of information are made available via an intranet, how this information is structured and what functions the intranet includes. Conventions, directions and advice about intranets and document management were studied, with the purpose to compare whether the systems of the company correlate with these. Other issues considered in the thesis, are how the employees of the organization use the intranet and how the document management is organized. To get an understanding of these questions the structure and functions of the intranet were studied empirically and a questionnaire on what the employees need and use, concerning the intranet, was sent out to 130 employees.

Which theological and rhetorical functions may the naming ????????? of the recipients have had in First Peter? This paper provides a theological and rhetorical analysis of the use of ????????? in First Peter. Theological background is provided through intertextual research on its occurences in the Septuagint (Ex 19:6; 23:22 and 2 Macc 2:17). Analysis of the theological and rhetorical functions of ????????? in First Peter builds on rhetorical methods, and predominantly the work of professor Lauri Thurén.

Face-to-face communication is always complemented with non-verbal signals that give us clues as to how a message shall be interpreted, but as communication is moved online the possibilities to express oneself becomes more limited.This paper focuses on the instant messaging client Windows Live Messenger and three of the non-verbal functions that it provides (nudges, winks and emotes). The purpose of the paper and its underlying study is to compare the senders' intentions with the receivers' conceptions when it comes to these functions.The study was done as a questionnaire with two different versions of the questions, one looking at the senders' intentions and the other at the receivers' conceptions.The results were then compared in order to look for tendencies. The results showed that the most common intention among the senders was also the most common conception among the receivers, but that the rest of the attitudes didn't match at all. The functions that are supposed to help the conversation flow often create ambiguity instead and lead to vagueness, misconceptions and annoyance..

An analysis of Konstvägen Sju Älvar, an exhibition of modern Nordic sculpture along a road trough the wilderness of Northern Sweden. Konstvägen is a project for public art and contemporary art in northern Sweden. The intention is to see what happens when you exhibit art alongside a road and what function it fills. By comparing the qualities of Konstvägen to the qualities of a monument Konstvägen and it?s exhibitional functions are sought to be understood..

This essay is focused on the phenomena of self-injurious behavior of two young men. The purpose of the essay is to enlighten their experiences of their earlier self-injurious behavior, and to further enlighten which factors they believe have been contributed to the origin and the ending of the behavior. The research questions the essay raises are: Which factors has contributed to the origin of the self-injurious behavior? Which functions did the self-injurious behavior have for the young men? What made the two young men quit their self-injurious behavior? The essay is qualitative and do not imply to generalize the results and it is made from interviews with respondents and earlier research on self-injurious behavior. The results show that there are differences in the factors that origin of the self-injurious behavior between the respondents.

The Swedish Aviation Safety Authority has decided to standardise a classification system for reporting deviations found in inspections. The purpose of a classification system is that similar deviations always should be reported in the same way since this will enable better decisions regarding different risk areas. The inspectors are therefore constrained to use a standardised classification system and are not free to use their own words when reporting deviations. A hierarchal classification system with predefined phrases is in aviation referred to as taxonomy. Taxonomy is already in use when reporting accidents and incidents but not when reporting deviations found in inspections.

With increased globalization more companies are sending their employees abroad in order for the company?s survival on the market. Many studies in the field of International Business describe unsuccessful foreign assignments and the importance of intercultural support regarding expatriation. Due to the fact that company X is an international organization we found an interest in studying how the company handles their expatriation process in Sweden. This became the purpose of our study.

The thermal response of a borehole field is often described by non?dimensional response factors called gfunctions.The g?function was firstly generated as a numerical solution based on SBM (Superposition BoreholeModel). An analytical approach, the FLS (Finite Line Source), is also accepted for generating the g?function. In thiswork the potential to numerically produce g?functions is studied for circular borehole fields using the commercialsoftware COMSOL.

Abstract This report is our bachelor thesis. Our work has taken place at a galvanising company in Sölvesborg. The company faced major changes, of which one was a computerisation process. The new system could involve changes in work practice and in specific tasks, affecting the workers. If the coming system was to support work, from the production personnel?s perspective, we felt a legitimate participation in the development and design of the future work practice, was a requirement that was not met.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

The main reason for doing this kind ofproject was to find out if it was possible to make a relatively advanced application with user friendly tools. We tested the software MIT App Inventor, and the ability to create a useful application for people who wants to get an overview of their energy intake.During the process we found out that it was possible, but minor setbacks occurred. The main idea of our vision; to make a calculator and a registry with different kinds of food and their amount of calories, was completed quite easily. Later on, design alternatives and more advanced functions were not possible for us to make.This might have been because of the short amount of time the project was given, but also, and more likely, because the software did not contain that kind of advanced functions. Even if there were factors that held creativity back, the basic idea was possible to form..