The Stockholm office market segment have for a long time been considered a safe havenwhen it comes to withstand negative turmoil in the form of rental compression due toeconomic fluctuation, especially in the CBD demographic. Recently however, a large numberof banks and institutions, amounting to some 200000 square meters, have decided to relocateto more peripheral locations with the aim of cost reductions on rent. This mass exodus isstudied with focus on rental dynamics as the result of increased vacancies. Other variables arestock changes and employment. The method is econometric combined with an interviewseries.

Drinking water is produced from raw water and is either from groundwater or surface water. This thesis aims to find out if the cleaning process of raw water is sufficiently effective. This is important because consumers are otherwise at risk of waterborne infection caused by pathogens. There are three groups of pathogens; bacteria, virus and parasite. These have different characteristics which mean that they require different water treatment to be separated.

This thesis discusses model based tracking of radar echoes in tanks with liquid content. The errors in the measurements are not always random in these cases, and the interference that occurs when nearby echoes moves in relation to each other makes tracking difficult. The tracking problem can be broken down to four parts; track initiation, track destruction, association of the measured echoes to the tracks and to update the tracks with the associated echoes. The radar measurement is primarily made on the surface. However, additional echoes from the tank floor or other structures and double bounces are normally present.

This paper is an assessment of whether the Nordic countries constitute an optimum currency area (OCA) or not. Hodrick Prescott-­?filtered data of real Gross Domestic Product (GDP) and rate of employment are used to investigate the similarity of business cycles between the target countries through a series of correlation analysis with Sweden as the base reference country and also by using a linear regression model. Additionally there is an evaluation of trade volume and labour mobility between the countries. Our results indicate that Iceland had the least similar business cycles within the Nordic countries and that the area should therefore possibly comprise Denmark, Finland, Norway and Sweden. .

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

This thesis compares four relevance feedback methods. The Rocchio and Ide dec-hi algorithms for the vector space model and the binary independence model and Okapi BM25 within the probabilistic framework. This is done in a custom-made Information Retrieval system utilizing a collection containing 131 896 LA-Times articles which is part of the TREC ad-hoc collection. The methods are compared on two grounds, using only the relevance information from the 20 highest ranked documents from an initial search and also by using all available relevance information. Although a significant effect of choice of method could be found on the first ground, post-hoc analysis could not determine any statistically significant differences between the methods where Rocchio, Ide dec-hi and Okapi BM25 performed equivalent.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

Management by contract is nowadays a common method within the public sector since the NPM overtook as paradigm with its mechanisms of control inspired by the private sector. The public agency is foremost a service provider where they interact with citizens in the service process. Swedish eldercare has significantly increased its expose to competition which means that eldercare can be executed not only by the municipalities own provider. Such an adaption increases the requirements to inspect quality and how the purchasers assure goal achievement by control. The outmost liability stays with the municipality to ensure that the service produces god care since their position as the service purchaser implies the responsibility to plan, precise and evaluate the required work that the executor has to accomplish.

This essay aims to map the ideas behind the Swedish cultural reform called Kultursamverkansmodellen, and how the ideas are forming a discourse. Furthermore it examines the social praxis on the three levels that constitutes the model. The three levels are the state, the region and culture creators/civil society. This is a qualitative study based on primary and secondary sources collected on the three levels. The theoretical frame of reference is based on institutional theory, on Michel Foucault?s lecture on The Discourse of Language, and on New Public Management.

This Masters thesis concerns epistemology in Knowledge Organization KO, as a field of study in Library and Information Science LIS. Using a theoretical model by Birger Hjørland and foucauldian discourse analysis as springboards, this study analyses three epistemological discourses in the practice of KO. The aim of the study is to show how these discourses are constituted and demarcated in relation to KO, as well as to examine how they fit into Hjørlands model. A brief historical outline of some epistemological trends in LIS is sketched, as well as examples of how different epistemological schools influence different parts of KO, e.g. information retrieval, indexing- and classification theory.

Franchise theorists have to a large extent failed to keep up with the actual development in global franchise chains. The recent emergence of fast growing multi-unit-franchisees has fundamentally been ignored, and it has been claimed that the new phenomenon can be regarded as a mere replication of the franchisors? structure and control system into sub hierarchies. This study however, suggests that the reality is more complex. Through conducting case studies of two Nordic multi-unit-franchisees, new theories are built explaining how and why control systems are designed the way they are.

Företag inom alla branscher arbetar aktivt med att minska sina kostnader genom ökad effektivitet i interna processer, så är även fallet inom daglivarubranschen. Ett sökande efter ny teknik och nya sätt att utveckla branschen står alltid på dagordningen. Radio Frequency Identification (RFID) är nästa generations identifieringsteknik för dagligvaruhandeln, det är därför viktigt att tekniken börjar implementeras och användas. Svenska Retursystem är ett företag som tillhandahåller returlådor till den Svenska livsmedelsbranschens aktörer. För att effektivisera användandet av lådorna så har de givit uppdrag om en undersökning om vilka effekter införandet av RFID i deras returlådor skulle ha på användandet.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.