The aim of this report was to quantify the accumulation of carbon dioxide (CO2) and methane (CH4) in ice-covered lakes in winter (October-March) during three consecutive years, and to assess whether the concentrations of DIC and CH4, as well as the ratio DIC:CH4 differs between years and between lakes affected by clearcutting and untreated reference lakes. Water- and gas samples were collected from four boreal lakes (two affected by clearcutting and two untreated reference lakes) located in Västerbottens inland in spring. The lakes were found to accumulate on average 91, 55, and 84 mgCm-2d-1 during winters 2012-2013, 2013-2014, and 2014-2015, mostly originating from CO2. The concentrations of DIC (autumn and spring) were higher in the affected clear-cut lakes compared to reference lakes for all years, including the reference year (2012-2013) before clear-cutting. No such difference was found for CH4 or the ratio DIC:CH4.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

Energimyndigheten har drivit ett projekt kallat ?Förbättrad energistatistik i bebyggelsen? för att få mer kunskap om energianvändningen i byggnader.  Denna rapport fokuserar på ?Mätning av hushållsel på apparatnivå? som var ett delprojekt.Diverse regressionsmodeller används i denna rapport för att undersöka sambandet mellan elanvändningen och de olika förklarande variablerna, som exempelvis hushållens bakgrundsvariabler, hushållstyp och geografiska läge, elförbrukningen av olika elapparater samt antalet elapparater.Datamaterialet innefattar 389 hushåll där de flesta är spridda runt om i Mälardalen. Ett fåtal mätningar gjordes på hushåll i Kiruna och Malmö.Slutsatsen vi kan dra från denna uppsats är att hushållens bakgrund, hustyp, geografiska läge och antal elapparater samt dessa apparaters typ har relevans för elförbrukningen i ett hushåll..

In June 2013 a debate concerning the consumers? right to a label of origin on food packages was held in the Swedish parliament (www, Riksdagen, 2014). The debate was sparked by some food scandals where labelling was falsely used, claiming something that was not true ? the horse-meat scandal, frozen strawberries infected by Hepatitis A, pork sold as beef, etc. These cases were not only wrong in terms of food safety, but also fraudulent and threating consumers? right to fair origin labelling.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

En automatiserad beställningsprocess resulterar i olika effekter för detaljisten och beror till stor del på vilken grad av automatisering som uppnåtts och den rådande situationen. Automatiseringen ställer höga krav på ett korrekt lagersaldo, där återförsäljaren har svårigheter med svinn, stölder och egen förbrukning, som inte registreras. Dessa svårigheter tror vi i stor grad påverkar effekterna i automatiseringen. Teorierna har oftast en optimal situation som grund i sina beskrivningar av effekterna, men vi tror att dessa effekter är olika påtagliga beroende på graden av automatisering och rådande situation..

The aim of the Master?s Thesis work is to study and develop algorithms for autonomous travel of a UGV (Unmanned Ground Vehicle). A vehicle for the mounting of sensors has been constructed in order to perform the work. Since the UGV is to be used outdoor in urban areas, GPS can be used. To improve precision and robustness, inertial navigation is used in addition to GPS, since GPS reception is likely to be diminished in such areas.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

This report treats two assignments that concerns the biofuel furnace at Billerud Skärblacka AB and how these assignments were solved. The assignments were: reducing the number of CO-spikes and tuning the overfire air control loop. To reduce the number of CO-spikes the possibility that skewness in mass distribution affects the number of CO-spikes were study. The skewnwss of mass distribution was controled and adjusted with two experiments. The conclusion that was made is that the skewness of mass distribution were not sufficient enough to affect the number of CO-spikes.

The aim of this master?s thesis is to examine the virtual reference service Ask the Library [Bibblan svarar] from a postmodern perspective. Ask the Library is a Swedish online reference service that is run by the country?s public libraries. The postmodern theories of Jean-François Lyotard are used to study how information is managed and transmitted within the service.

This thesis examines how a company can get an effective, high quality, maintenance of their computerized systems. After literary studies concerning the life cycle activity Maintenance we have studied how the maintenance at the department IT Supply of IKEA IT AB in Älmhult is carried out. What steps and measures in the analyzing of results of changes are carried out and if they have predefined processes for changes. Based on the facts we found most important in our literary studies we have created a model and theoretically applied this to the maintenance of a specific system to see what they can work with to further improve the quality and efficiency in their maintenance. The basis for our thesis is literary studies and the collected material has been used as a foundation for the research at the company, which was carried out through interviews.

PurposeThe purpose of this thesis is to provide a deeper understanding of how e-commercecompanies within the fashion industry are working with lead times and illustrate andanalyse differences and similarities between companies.Research question- In which ways are e-commerce companies within the fashion industry working withshort lead times?MethodologyThis thesis is based on a qualitative research method in order to achieve a greaterunderstanding of the chosen topic, of how the chosen companies are operating and toprovide room to our own interpretations and reflections. Interviews through telephonewere used to gather the empirical data from six different e-commerce companies withinthe fashion industry.ConclusionsAfter completing the theoretical and empirical analysis it can be concluded that leadtimes are considered essential for all of the participating companies but there is adifference in which way they look at, and how they work with lead times. Somecompanies stressed that short lead times are an important aspect of competition andclaimed that this is something they are constantly working with. For others the balanceand matching of supply and demand was the most important factor rather than toachieve short lead times.