District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This thesis deals with the concept of how price affects demand for a good by estimating various price elasticities of demand for snu sold in Sweden. Information was gathered on price development for snus and cigarettes as well as sales data from Swedish Match, the largest supplier of snus in Sweden. Income-, price- and cross-price elasticities were estimated based on log-log regression. Results show that snus is an inelastic good since the coefficient for price of snus was -0.536. This proved that a 1% increase in price causes a 0.536% decrease in quantity demanded.

I takt med att inköp har fått en allt mer betydande roll inom företag krävs det också att strategier för inköp utformas på ett sätt som möjliggör att de kan efterlevas och följas upp, framförallt när det rör sig om koncernövergripande strategier som kräver samordning. I dagsläget är det inköpsrådet på Saab som styr över och samordnar projekt och initiativ som sker inom inköp. Inköpsrådet ansvarar även för framtagandet av inköpsstrategier och arbetet utifrån dessa för hela koncernen. En första klassificering av Saabs leverantörer utefter Kraljics matris genomfördes år 2010 och i samband med detta har ett ökat intresse påvisats för att på ett differentierat sätt mäta och följa upp leverantörer. Syftet med studien är därmed att se vilka Key Performance Indicators (KPI:er) som är tillämpliga i en indelning av leverantörer enligt Kraljics matris, det vill säga om olika KPI:er är fördelaktiga för att genomföra mätning och uppföljning av olika typer av leverantörer enligt Kraljics matris.En betydande slutsats med indelning av KPI:er enligt Kraljics matris är att studien ska påvisa vilka mätetal som är mest väsentliga att ha vid uppföljning av leverantörer kopplade till respektive kvadrant i Kraljics matris.

The purpose of this thesis is to explore the co-creation process and how value is created based on a service orientation using a network perspective. The thesis is studied from a social-constructionist philosophy, using a qualitative approach of data collection and the theoretical framework includes network theories, theories of service-orientation and co-creation. We have conducted semi-structured interviews with a small firm and its network, which consists of a customer, a supplier and a partner. We found that Håkansson?s ARA framework combined with Ballantyne and Varey?s triangulation of value-creating activities help to acquire an understanding of the actors? bonds, the resources? ties and the activity links that exist in a network.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

The thesis has two aims to first describe the phenomena by explaining how interim management works and what the charachteristics of an interim manger are. The second aim is to look at the value issue of interim management; What value does an interim manager provide to a company and how do interim managers try to capture and cultivate this?The qualitative method has been used. The interim management market analysed in this thesis can be stated to consist of three parts; the interim manager as a provider of knowledge, a client firm in need of a temporary manager, and an interim agency in between working as an intermediary/supplier. The characteristics of interim managers are; they are in general self-employers and rather generalists than specialists, meaning they are experienced and have great knowledge skills.

The research objective of this thesis was to conduct a holistic evaluation of an operational information system. By holistic evaluation we mean that an equal focus was placed on both the system system perspective and its users user perspective, in the actual environment where the system and its users function contextuality. In addition, the methodological objective of the study was to test a new research approach in a real life setting. The participants of the study were twenty newspaper journalists employed at Göteborgs-Posten GP. The information system NewsLink is a manually indexed full-text database containing all articles published in GP since 1994.

Banverket Trafik has a responsibility to make sure that the companies who traffic the Swedish railroad have the correct information about the status of the railroad. One of Banverket Trafiks information systems (Opera) presents the train?s actual position on a map and provides the user with physical information about the trains. Due to increasing demands on the information systems, Banverket Trafik needs to update the present system architecture in order to manage the increasing demands on map graphics and map functions. This paper analysis the information system Opera on the basis of theory and support of methods and discuss problems and demands for Opera.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

Uppsatsens titel: Technology-to-Performance Chain: Game ModelInlämningsdatum: 2006-05-26Ämne/Kurs: INF 630 kandidatuppsats, 10 poängFörfattare: Marcus BjörckDennis JonovskiHandledare: Hans-Christian StoltzNyckelord: TPC, TTF, GameFlow, tid, upplevelseSyfte: Att ge spelutvecklare en grundläggande och överskådligmodell som är anpassningsbar inom spelutveckling.Metod: Vi har använt oss både av kvalitativa och kvantitativa metoderpå en grund som kan liknas vid en abduktiv ansats. Primärdatainsamlas genom en pilotstudie, en enkät samt två intervjuermed spelutvecklare från spelutvecklingsföretag.Teori: TPC och GameFlow ligger som underlag för vår teoretiskareferensram och grundar formandet av en ny modell vid namnTPC G. Vidare ger TPC G en gemensam bild av hur de tvåförstnämnda teorierna integreras med varandra.Empiri: Utifrån enkäten och intervjuerna har det framkommit attupplevelsen är det primära för användaren av datorspel och attdetta ger svar på hur bra egenskaperna kombineras i spelet.Resultatet av enkäten visar att många datorspelsanvändareupplever tidsåtgången som besvärande. Då tidsaspekten är enavgörande faktor för hur datorspelet uppfattas som helhetmedför detta problem även för spelutvecklare.Slutsatser: Genom att applicera TPC G hjälper systemutvecklingsmetodikspelutvecklare att uppfatta hela utvecklingsprocessentidigt i utvecklingsfasen. I modellen ses även tidsaspektensom en avgörande faktor där spelarnas och utvecklarnasuppfattning inte överensstämmer..

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.