Sökresultat:
1515 Uppsatser om Supplier evaluation - Sida 57 av 101
Hydrauliken i Ångersjöns fosforfällor : bestämning av flödesvägar och åtgärdsförslag för optimal fosforbindning vid avloppsrening med reaktiva filter
Discharge of untreated wastewater leads to unnaturally high levels of nitrogen and
phosphorus in rivers, lakes and the sea, which results in unbalanced ecosystems with
eutrophication and lack of oxygen. Part of the phosphorus in surface waters is coming from
on-site wastewater treatment from scattered households with unsatisfactory purification.
Blast furnace slag is a by-product from iron production, and has in laboratory trials showed good phosphorus binding capacity. To test blast furnace slag as a reactive filter media for phosphorus separation in a full scale experiment, a wastewater treatment plant has been built behind the picnic area at Ångersjön alongside the road E4 in central-eastern Sweden. The plant contains two parallel lines, one with blast furnaces slag and the other with Filtralite-P as phosphorus sorbent. Both filters have showed decreasing phosphorus purification effect with time in spite of a low wastewater load.
Evaluation of a new microarray method for genotyping of HLA-DQ2 and HLA-DQ8 for investigation of celiac disease
Celiac disease (CD) is an autoimmune disease, induced by an immune mediated reaction in the small intestine after ingestion of gluten and related prolamines. There is a strong genetic linkage and most important are the genes that encodes for HLA-DQ2 and HLA-DQ8. The European Society for Paediatric Gastroenterology, Hepatology and Nutrition (ESPGHAN) has developed new guidelines for investigation of CD in children and adolescents, which include genotyping for HLA-DQ2 and HLA-DQ8. Therefore, the clinical microbiological laboratory in Västmanland wants to introduce a method for analysis of these genes. Microarray is a newly developed method for determination of the alleles HLA-DQA1 and HLA-DQB1 that encodes for the ?- and ?-subunits of the HLA-molecules.
pm3-revision : En välgrundad metodutveckling av metod för revision av förvaltningsstyrning
In the field of maintenance management there are but a few models an organization can use. The one model that has risen to the status of being the de facto standard in Sweden is pm3(på maintenance management model). The aim of this study is to lay the groundwork for a new method of evaluate the use of pm3within organizations. Today there is no uniform way of performing such an evaluation, which is necessary in order to diagnose the performance of the systems maintenance organizations.In the process of creating our own method for performing this kind of pm3audit, we further developed the ideas from a study by Lagsten & Nordström (2013) that was performed at the county Region Skåne. The authors of that study had developed ideas about using method rationale as a basis of creating a method for pm3auditing.
Framtagning av nyckeltal som indikerar kvalitetsbristkostnader : Development of key performance indicators revealing the cost of poor quality
Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.
Modellering och reglering av drivenheter i gaffeltruck
To enable the enhancement of the driver's environment in a forklift, an alternative form of steering has been evaluated. An earlier concept with a combined driving and steering wheel has been exchanged to a concept with two driving wheels. A link wheel has replaced the combined driving and steering wheel. The steering is done through differentiation of the velocities of the two driving wheels. The scope of this master thesis is to create a simulation model, create a control program and to evaluate the concept of two driving wheels.
Intern marknadsföring: en fallstudie på Luleå tekniska universitet
For the success of universities, it is very important that the personnel are well motivated through internal marketing. The purpose of this report was to identify which activities universities uses to motivate their teaching and researching personnel and how the activities are valued by this group of employees. The study was conducted in the form of a case study. One interview with the chief administrator at Luleå University of Technology was conducted, and a questionnaire was sent to all the teaching and researching personnel at the same university. The result indicates that Luleå University of Technology uses many internal marketing activities to motivate their employees.
Studie av skyddsavstånd mellan bergvärmeanläggning och skyddsobjekt i ett vattenskyddsområde
During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.
Att sätta fingret på emotionell intelligens - En kvalitativ studie om användningen av EQ-test i rekryteringsprocesser
Emotional intelligence (EQ) has been claimed to be the most critical factor in determining a person's success in life, both personal and professional. EQ highly affects academic and job performance, leadership, stress, and well-being but is still not widely accounted for in recruitment processes. During the last 20 years a large number of researchers have shown interest in the concept of emotional intelligence, but few have studied its practical implications and how EQ-tests are used as a selection tool in recruitment processes. To create an understanding of the motivation for using the test, as well as its role in recruitment decisions, qualitative interviews have been conducted with recruiters at companies in Stockholm, Sweden. All interviewed companies use the self-assessment test EQ:i 2.0.
Evaluation of a behaviour protocol for use in recording the behaviour of horses following administration of methadone
There is a need for correct and adequate pain assessment in horses. Methadone is used in pain management in horses but the full pharmacokinetic picture of methadone is not yet known. The aim of this pilot study was to develop a behaviour protocol and suggest a reliable recording method for use in a larger research project with an aim to potentially correlate behaviours to concentration of methadone in blood. In this study two coldblooded trotters were given methadone intravenously with doses of 0.1 mg/kg for horse 1 and 0.2 mg/kg for horse 2. The horses were videotaped pre and post methadone administration.
Val av teknik för hastighetsmätning i kallvalsverk
An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system. One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.
Konsekvenser av ny teknik på en sjukhusmottagning
An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system. One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.
Google, Yahoo! och Live Search: en evaluering av tre webbsöktjänster
The purpose of this Master?s thesis is to evaluate three general query-based web search engines. The search engines chosen are Google, Yahoo! and Live Search. The topics, which where transformed into twenty queries, are based on real users? information needs, taken from an ask-a-question service.
Att utföra användarcentrerat arbete med små medel
Usability is a field within systems development which doesn?t get the attention it might deserve. Above all, it?s considered time consuming and expensive by many people in the industry. The current information regarding low-cost alternatives to achieve a more usable system seems to be almost non-existent.
Modellering av ett bränslesystem i Modelica : tillämpat på ett obemannat flygplan
Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.
I huvudet på folkbibliotekarien ? En studie om folkbibliotekariers uppfattningar om lässtimulerande insatser
During the last ten years, PIRLS and PISA have evaluated the reading levels of children and youth around the world, sometimes with grim results. The Swedish evaluation show a constant decline in reading comprehension, and Sweden, which from the start produced one of the best results in the world, have plummeted to the bottom of the ranks. The librarians of the public library have extensive experience of working with different projects engaging children and youth in reading, and so they have a major part to play in this matter. Consequently, the aim of this study is to examine and describe the different perceptions the public librarians have of these projects. Four research questions were formulated, each focusing on the perceptions regarding different aspects of the reading promotion projects.