AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The aim of the work was to compare fuel consumption during work in practical field conditions with a standardized method developed by Skogforsk (The Forestry Research Institute of Sweden), (Brunberg, 2005) for harvesters and forwarders from different manufacturers and of different sizes in order to promote the development of more fuel efficient machines. Two studies were carried out. - Statistics of fuel consumption were collected. - An inquiry was sent out in order to get more detailed information of different aspects influencing the fuel consumption. The studied machines were divided into two classes, large machines (> 150 kW), and average size machines (100 ? 150 kW), and of the manufacturer Timberjack and Valmet. Our results shows a 15 % lower fuel consumption for average size harvesters and an 8 % higher fuel consumption for large harvesters compared with Skogforsks model.

Social indexing is an approach to manual indexing of web content. The purpose of this master thesis has been to investigate terminological and conceptual consistency in social indexing of web content. Conceptual consistency was investigated/measured focusing on synonyms and (the use of) singular and plural forms of words. In order to measure consistency in social indexing data were obtained from the Delicious website. The data set consists of five indexed objects, 3001 tags and 239 users.

Denna rapport har jämfört olika path tracking-algoritmer för att se vilken som presterar bäst för spelagenter som färdas i konstant hastighet. Tre vanliga path tracking algoritmer som ofta används inom robotik har valts ut för undersökningen, Follow The Carrot, Pure Pursuit och Vector Pursuit. Algoritmerna har implementerats i C# och simuleringarna har genomförts i Unity 4.0. Path tracking-algoritmerna har testats på ett antal olika vägar för att se hur de lyckas följa vägen. Av simuleringarna så visar det sig att Pure Pursuit och Vector Pursuit presterade likvärdigt för spelagenter i konstant hastighet samt att de presterade bättre än Follow The Carrot..

This thesis work is performed on VSM Group Ltd in Huskvarna that produces sewing machines under the trademarks Pfaff and Husqvarna Viking. On these sewing machines is an application that helps the user to thread the needle. The aim with the work has been to study today's applications on VSM and their competitors' sewing machines in order to since developing a new Needle-threader that divides itself from all the ones used today. The objective with the work has been an entire new concept with an operational prototype.As a base the competitor analysis was used where today's applications was studied in order to identify positive and negative aspects of these. This led to a number off ?concept families? where different variants off the same ideas were collected and evaluated.

SMF Skogsentreprenörerna is a nationwide organisation for Swedish forestry contractors. It has about 750 organised companies with somewhere around 1500 logging machines. These machines perform well over 50% of all yearly landed wood in Sweden. The members of SMF also performs more and more of other functions in Swedish professional forestry, such as soil scarification, planting and pre-commercial thinning of younger stands. In order to determine what major priorities SMF should focus on in the future a member survey was initialised and carried out by SMF together with Daniel Larsson-Snygg, student at the swedish university of agricultural sciences SLU. This report presents the result of this survey sent out to all members of SMF. It is intended to answer a number of questions about their entrepreneurship such as: What different kinds of work do these companies perform? How many machines and employees do they have? How old are the company owners and their employees? What are their thoughts about the future of their business? How well does SMF serve their members needs?.

Previous research has found an increased transmission of stock movements in Europe, partly caused by the establishment of institutions as the EU and the EMU. The purpose of this paper is to find the possible impact from the EU and the EMU concerning the evolution of international transmission of stock market movements, on four Scandinavian markets, Denmark, Finland, Norway and Sweden. The research is based on primary data, existing theories and earlier studies regarding international transmission of stock market movements. The examined method is a VAR (Vector autoregressive model) including a 10x1 vector of variables. Furthermore the tests considered are correlation, granger-causality, variance decomposition and impulse response.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

An attempt was made to GFP-tag the effector proteins of AvrLm6 and AvrLm4-7 using the GFP-tagging gene knockout method (GGKO) developed by Saitoh et al. (2008) in order to determine whether or not they are secreted. Successful pETHG-(target)KO vectors were not generated. The protocol was examined for potential errors. Fatal errors were pinpointed to the ligation reaction and the transformation required to generate and propagate the desired vector pETGH-(target)KO.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

During the last decade, there has been an increase in the use of technology-based self-services within the retail sector. The increase is particularly noticeable within the grocery market. The reason behind the increased use of these systems is partially due to the fact that companies within highly competitive retail markets continually look for ways of decreasing costs while upholding efficiency. The problem is that it is difficult to understand the true economical implications of investments relating to these machines. The purpose of this study is to investigate and contribute with new insights regarding the cost-structures of the stationary self-checkout systems and traditional cashier desks, within the retail grocery market.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

ABB Motors and Generators manufacture large AC machines with oil lubricated plainbearings. The machines have occasional problems with oil leakage from the bearings. aproblem that ABB wants to be solved.In this thesis the cause of this leakage were investigated, with focus on the bearingseals.The purpose of this work was also to suggest amndments for preventing thisproblem. , and to suggest improvements that can prevent this. The first step was todo a literature survey of earlier work on this problem, study the theory ofhydrodynamic bearings and different types of seals and their properties.

In this study we try to focus on the costs for wear parts on different type of soil tillage machines and at Väderstad Rapid drilling machine. We have studied some of the leading types of cultivators and disk harrows. Among the cultivators we have investigated Väderstad Cultus, Dalbo Dinkomax, Horsch Tiger and Terrano. At disk harrow we have looked at Amazone Catros and Väderstad Carrier. We have made more detailed study on costs for wear parts, working depth, driving speed and diesel consumption.