During my studies to become a guitar builder at Carl Malmsten CTD, I have found an interest in the construction of the classical guitar. I am fascinated by the simplicity of its construction. A simplicity that becomes more complex when you start to study it in detail.In my final thesis I will not try to explain this complexity. The subject is to investigate two different principles regarding its construction. I would like to find out if the sayings concerning one of the principles will yield a guitar with greater ability to produce volume and projection.At a close distance the difference between the guitar?s volumes is not to speak of, but a significant difference can be seen regarding one of the guitars ability to project its sound.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

Research on the power of customer involvement, and in particular recommendation is very resourceful. Many studies have mapped the reasons for why customers are willing to recommend, however they often ignore potential differences among brands and how that may affect these reasons. This study is built on a quantitative survey investigating how consumers interact with brands, depending on category affiliation. The categories used were Bhat and Reddy's symbolic and functional, consisting of three brands respectively where each brand represented a different product type.The evolvement of social media has also transformed the platform of recommendation from physical to virtual and changed the way people connect. Thus, taking the investigation further, potential differences between symbolic and functional brands was tested in different social media platforms.

This Master thesis discusses the development of a virtual human soft tissue object for use in exercise applications of various medical procedures.The soft tissue object to be developed shall look like, feel like and behave as living human tissue. It shall give the user a realistic feeling of weight, softness and roughness, and shall behave in a correct way for exercise purposes. The soft tissue model is to be used in a three dimensional stereo graphic environment with haptic feedback. A prototype for practicing the procedure of inserting a catheter is built. The prototype is used to evaluate the potential of the virtual environment for medical exercise applications, and to assess the realism and usability of the soft tissue object.

LRF Konsult AB is a Swedish company with over 135 offices. During the time 2006-01-01 to 2008-06-16, 397 persons were recruited. New people will continue to be employed and because of that a need for consistant information for the recruits has been noted. The essay question is what a handbook should include to guide a newly recruited person. The newly recruited person that is referred to works at LRF Konsult AB with farming companies. The answer to the question is that it depends on the needs the employee has.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Gender is a universal factor that is unavoidable in classroom interaction between pupils and teachers. The principle aim of this essay is to illustrate whether, during the interaction between pupil and teachers still occurs behavior that expresses a gender order. We also want to establish if the ones who attract attention from the teachers is the individual, or if teachers still on a subconscious or conscious level, think of the pupils gender and ascribes him or her some characteristics or qualities. Especially we want to bring out the pupils thoughts and sights of there is a difference on how teachers treat boys and girls. Another purpose we wanted to achieve was to illustrate how teachers work with the concept of equivalence between the sexes, according to Lpo94.Our essay is built on our studies around what teachers think on how they treat the pupils, on the basis of gender perspective.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

ABSTRACTToday's modern technological society is constantly evolving and house planning is one area that is constantly creating new technical solutions. By looking back at selected architectural eras during the 1900?s, the idea is to study and analyse three building structures in Gothenburg with a focus on quality and content in the urban space.In order to provide a background for the three selected areas, their history has been studied. The main question for the research is: how do different building structures affect the content and qualities in the urban space?The areas have been selected to represent three typical epochs in Swedish building history.

This has been a practical innovation graduation project withthe focus of studying the impacts of downsizing on a learningorganization. The study took place at Karlsson Spools in Sala.This has been a part of an ongoing EU project funded by theEuropean Social Fund, ESF. We have, with the help ofinterviews and surveys, gathered information on the presentsituation and with the help of theoretical studies built aframework on how a learning organization is viewed intheory.During our study we found that there are many componentsto a learning organization. The company in question hasdisplayed some qualities that characterize a learningorganization such as a plan to train and further develop theiremployees. The problem we found was lack of communicationand how this has resulted in a less successful outcome of theongoing courses.