The park at Svaneholm is a place, the history of which is very little known today and the needfor better knowledge has been the cause of this investigation. The essay is primarily limited tothe time from late 17th century up to the end of the 18th century and takes stand on profoundinvestigations in accessible map-and archive material. The results presented show a manorhill, which during the course of a hundred years was subject to several changes and in bigparts consisted in other than park/garden.Burman related to the manor hill containing a cowshed, a large dam and a parterre garden isix quarters and it is plausible to think, that this establishment generally was built as producedon the plate.In the 18th century the construction is being changed, they go on building at the cowshed andin 1707 there are totally 268 livestock on the farm. In 1723 the garden is represented in amuch bigger scale than on the plate from the 1680:s, but it is not possible to tell, whether it isnew or not.Parts of the parterre garden is remaining during the whole of the 18th century, for the leastuntil it is being squared, but on two of the squares there was built a riding-groundMoreover the cowshed burnt down and was only partially reconstructed.The image given by the archive material is at the same time variegated. The inventory list ongarden tools from 1726 gives an image of gardening more directed to growing and pathshuffling, while the possibilities of keeping the parterres were fewer (e.g.

Syftet med examensarbete är att studera och ta fram dels i vilken utsträckning virtuella bygg-metoder används inom infrastrukturprojekt idag och dels en arbetsprocess för att använda byggnadsinformationsmodeller (BIM) och 4D-modellering från skisstadiet till färdiga handlingar. Arbetet med denna rapport påbörjades med en kartläggning av vilka programvaror skribenterna hade att tillgå vid sitt universitet, i detta fall Autodesk Infrastructure suite 2014. Examensarbetet är utfört genom fokusgruppintervju med personal från Trafikverket investering. Projektledare, arbetsledare och projektingenjörer valdes att intervjuas för att ta reda på hur mycket 4D, BIM och digitala 3D-projekteringsmetoder egentligen används inom Trafikverket idag. Efter intervjuerna med fokusgruppen så intervjuades ett antal experter inom virtuellt byggande.

Mediation is a process in which various actors are involved with each other, this involvement is what the mediation are built on, because all the actors complement each other, they coordinate their work. This is not an interaction between various actors, it?s a participation. There is no research on this kind of participation, and therefore we believe that this is a scientific problem. The purpose of this paper is to implement an exploratory study of stakeholders views on the mediation process.

The purpose of this essay is to investigate and discuss the current state of game research and its potential usage in didactic situations. The essay is divided in two parts. Part one consists of an attempt to comment preceding contemporary game research and address possible myths that have been established. Part two aims to discuss games narrative capacity and function in education using the theories and terms laid down by Wolfgang Iser and Gérard Genette.Contemporary game research tends to focus on classic retro games, trying to form theories for a general understanding of the media. This is a useful method as long as the purpose of the study is to define how game mechanics and layout are formed.

This essay considers the new prison in Kalmar, which was built 1852 and replaced the former prison in the castle of Kalmar. In the forts the conditions were awful and the interms lived together in large rooms. With the new reform that took place in Sweden, with the so-called Philadelphiasystem, the concept was to isolate the prisoner one by one in smaller rooms. The idea was to give them a religious ground so they could get themselves a self-reflection and a conscience. It was a new system for the personnel to control the internals and the order in prison..

The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..

In order to attract talented consultants, Sigma, a consultant company, wanted an online game for recruitment. In the game, potential employees? skills could be tested to determine whether they are qualified for the job. This paper presents a general technique for creating such a recruitment game. The report generalizes the recruitment game to a level-based game for the web, where a player should be able to progress from one level to the next by solving a given problem.

70 percent of Sweden´s municipalities say they do not have vacant rental flats and a shortage is emerging, during the same time are 1.1 million young people ready to enter the housing market. In order to curb the housing shortage, have the Swedish politicians since the postwar period chosen to stimulate the market with subsidies to increase new production and to control that what is built is in the right direction. The construction industry is perceived as conservative, and many argue that the state keeps it under their wings, which has led to that the development not has progressed in the same way as other, non-subsidy regulated industries.The purpose of ours bachelor thesis is to provide an overall picture and describe the underlying problems of the housing shortage at the rental market. In addition, we want to present theories about where possible actions could take place in the market, by illuminate the problem from the differente actors perspective.To fulfill our purpose and provide a deeper understanding of the problem we have chosen a qualitative approach. We interviewed nine different actors on the Swedish housing market, two managers, two to representatives of Halmstad Municipality, a representative for the construction operators and four different interest groups.

Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.