The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

The aim of this examination project was to work with the processof making a pattern collection for fabrics. The collectionshould consist of at least three patterns with report measurementssuitable for screen print. I wanted the pattern collectionto be a simple, mystic and colourful collection with a folklorespirit like the popular rural life I experienced during my childhood.The purpose of the project was that I during the working processwould deepen my estethic background to enforce my personalgraphic expression ability and evolve as a pattern designer.I wanted to try to mix my personal view of domestic graphicexpression with another language that I gained in recent years.This I wanted to do in order to find the tools that could helpme clarify and develop my pattern signature.A few of the questions that I had about this project were if thelong scetching phase that I planned would help or damage theproject.I also thought it would be interesting to experiment with coloursin this project. I wanted to see how far I dared to go inmatter of colours as well as how the patterns would be visuallyexperienced if I for example reduced one colour or replaced itwith the opposite colour.I thought it was inspiring to work with traditional techniqueswith the colours. It was only positive that part of the patternstory telling was developed in an unpredicted direction duringthe scetching phase.

The Energy Market Inspectorate is implementing a new tariff regulation in Sweden. A small part of the new regulation concerns effectible operation costs and originally they where intended to be calculated using a modification of equivalent comparison standards, in Swedish Ekm. This thesis is intended to analyze if Fortums grid in Stockholm could be described correctly, using equivalent comparison standards. In Ekm every part of the distribution grid is designated a weighting in relation to 1 km 0.4kV over head line. These Ekm-measurements are intended to simplify comparison between different grid areas with different structure and geographical conditions.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

This study is based on AgroSeas business idea from environmental problems to valuable resource, with the objective to optimize a method to purify the already eutrophicated Baltic Sea by harvesting water plants, mainly reed. The nutrients will then be recirculated to arable land through residues from biogas production. The amount of nutrients that can be removed by harvesting the biomass depends on the amounts of biomass and the nutrient content of it, which in turn is strongly dependent on the nutrient concentration of the surrounding water. Vegetation suggested in the study for an effective nutrient uptake is helophytes: reed, cattails, reed canary grass, reed sweet grass in shallower water and lemnoideaes: duckweed and nymphaeids in the deeper parts. Competitive species has high purification ability but requires regular maintenance to avoid channeling and overgrowth. Regarding time and method of harvest, effectiveness may be improved by: harvesting plants above the water level and after flowering, a border is kept, harvesting twice a season, a bigger machine and a regular maintenance. This literature has illuminated a major environmental problem and it has been suggested optimizations for a method for cleaning the Baltic Sea through harvesting water plants, but to get a definite answer for the optimal method for each site tests should be carried out, this because many factors determine to what is suitable for each, specific environment. .

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

This paper covers a study of the Swedish charging market for electric vehicles from both the perspective of stakeholders and car owners. By interviewing representatives of four key stakeholders on the market; commercial parkings, malls, service stations and working places, data regarding their business models of today is examined. At present electricity is provided for free, but all stakeholder point out that this business model is not sustainable in the long run. The result of the interviews shows that electricity won?t be offered for free in the future ? the question is which factors affect how long it will take for the different stakeholders to find a suitable business model.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

The purpose of this report is to find out which crops, that are good for strawfuel, and can be grown i the area around the city of Lund. The background of this report it that Lunds energy is planning to bild a biofuelheated thermal power station in Örtofta outside of Lund. I have in the report limited me to the crops hemp, whole crop (triticale), reed canary grass, elephant grass and jerusalem artichoke. I have through a documentary research checked the crops, cultivabillity in the south of Sweden, and how they should fit, in the Scanian crop sequence. Hemp is an annual crop which probably could manage in the Scanian crop sequence. Whole crop often triticale because of it´s high yield and low rate of shed seed. Could also fit into the crop sequence of crop in Scanian. Triticale is annual, and could be grown at the same kind of fields as used to wheat, whith is why it would be possible to grow it in Scania. Reed canary grass is a reedlike grass that is easy grown at most soils.

Title: What´s the problem? - A study of revenue recognition in IT-consultant     companiesProblem: How do the chosen IT-consultant companies recognize their revenues? What difficulties do the interviewed companies experience in connection with the revenue recognition?Purpose: The purpose of this empirical study is to study how companies in the IT-consultant industry recognize revenues, and to investigate if the companies perceive any difficulties in connection with the revenue recognition. The aim of the study is to give useful advice and guidelines to companies in the IT-consultant business based on the extracted result. Method: The survey took place in Vasteras and started with a preliminary interview with a certified accountant, who had great knowledge of the subject revenue recognition. Then seven companies from the IT-consultant industry were selected, whereof two took part in semi constructed interviews.  Study of the other five companies? ways to recognize revenue was made through their annual reports.   Conclusion: One of the studied companies recognizes their revenues according to the rules in IAS 18, which is because it is listed on the stock exchange.

The purpose of this paper is to explore the female experience as it is spoken of in the novel Sindhia written by Rut Hillarp (1954) and how the main character in the book violates the experience from a queer perspective. My aim is to through a close reading highlight a number of discourses that underpin the book's imminent theme of love and submission.According to Norman Faircloughs critical-discourse analysis, the text one reads produces a certain amount of discourses that one consumes. This way there is a dialectical interaction that can be set into a practical analysis together with a suitable academic perspective. This is the method I use in this thesis.The academic perspective I add isJudith Butler's queer theoriessupported by Michel Foucaults social genealogyin order to understand/analyze the woman?s position in relation to a social empirical history.I came to the conclusion that Sindhia produces the woman's discourse from an ancient biblical/ mythological time up to modern time.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

AbstractBackgroundParkinson?s disease is a chronically not curable progressive disease that leads to different degrees of disability. Controlled studies on how patient education influences subjective health in Parkinson?s disease are lacking.AimThe aim of this study was to examine the influence patient education had on drug requirements and on subjective health status of persons with Parkinson?s disease.MethodologyA short form of Health Survey, SF-12, was used to measure perceived health. SF-12 was administered before and one month after patient education (intervention group; n= 48), and in waiting list control (n= 48).

The aim of this Master?s thesis is to investigate what kinds of writing activities that are offered to children and young people in Sweden and if, how and why libraries are involved with them. The issues illuminated in this thesis are how children and youth can be motivated and advance in their writing, what the purpose of writing activities can be, and if writing activities can be suitable as a part of the work in libraries. The theory is based on a study with writing youth made by Catharina Nyström. In order to study the issues six interviews have been completed with persons who all have played a part in writing activities for children and youth.