The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

Under de senaste åren har e-underhåll väckt ökat intresse. Det är en underhållshantering där exempelvis ett fordon hanteras och övervakas över internet. Inom detta område finns det olika tekniker. En sådan teknik som vuxit fram under de senaste åren är ?remote diagnostic system? eller fjärrdiagnostiska system.

Syftet med detta examensarbete var att undersöka vilka faktorer som påverkat acceptansen hos användare, inom den kommunala verksamheten, vid införande av ett datoriserat system. Med acceptans menas att användarna ska kunna utföra sina arbetsuppgifter på ett bra och lätt sätt. Studien har gjorts utifrån användarnas perspektiv.Genom att genomföra en intervjuundersökning på ett flertal kommuner där användarna använder systemet Vabas/Duf, har undersökts hur användarnas upplevda acceptans påverkas av faktorerna delaktighet, användbarhet och lättanvändhet, vid införande av ett datoriserat system. Delaktigheten vid införandet av ett system innefattar även information och utbildning.Resultatet från undersökningen visade att delaktigheten ökade användarnas acceptans. Ingen avgörande slutsats kunde däremot dras mellan acceptans och faktorerna användbarhet och lättanvändhet, då resultatet från de båda grupperna inte visade någon märkbar skillnad..

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

Urban agriculture is a current topic and this study examines the possibility of cultivating on balconies in the city. The study was performed at Uppsala University and examines, from a structural engineering perspective, how different existing balcony/terrace structures are affected by cultivation. A cultivation balcony defined in the study as a balcony/terrace which is specifically designed for cultivation. Three units of study have been selected according to this criterion. Four factors were examined, these were loads, moisture/water, economy and cultivation.

Organisations and projects use CSCW/Groupware systems for collaboration purposes. These systems and applications are in many cases using a non-transparent GUI, witch is also hard to learn. This paper present a novel system that aims towards being transparent and easy to use. This system, called CollMX, will be evaluated and different ideas for future development will be presented.  The evaluation and ideas are generated by an empiric evaluation and research in different areas related to CSCW. The research does not only focus on the area of CSCW, but also extends towards the Web 2.0 and ideas about awareness..

In Europe, the central governments are the ones to coordinate the international standards and strategies regarding GPP; Green Public Procurement. However in Spain a GPP program was introduced late and only applied to the Central Government Institutions, (AGEA) (BOE nr. 027, 2008). These means that smaller administrations, such as, Autonomous Regions, Municipalities and Town Councils were not included in the program. The absence of a national program which excludes those governments made them introduce their own criteria for GPP, and the difference in criteria varies from one government to the other.

To support, enhance and, in the future, develop the activity within the county councils in Sweden, IT support systems are currently used to a large extent. The need to document is central to the health care organizations and the counties have come a long way in the introduction of electronic patient record systems (EPR). The aim of the EPR systems is to support the care processes and the clinical professions in their work.This is a master thesis in the area of human-computer interaction (HCI), Department of Information Technology at Uppsala University. The aim of the thesis was to describe and compare the five most common EPR systems in Sweden. The comparison will focus on some usability aspects and on how well they support the users in their clinical practice.

Denna studie bestod i att undersöka situationen på marknaden angående framdriftsanläggningar för LNG-tankfartyg. Syftet med arbetet var att skapa en relevant bild av hur situationen ser ut idag och genom intervjuer ta reda på hur den kan komma att förändras.Genom en litteraturstudie undersöktes läget på marknaden och utifrån det kunde relevanta frågor utformas. Efter att frågorna hade utformats tog författarna kontakt med olika företag som var anknutna till marknaden för LNG-tankfartyg. Intervjuer med företagen genomfördes och dessa har gjort det möjligt att analysera hur läget kan komma att förändras.Studien har visat att det finns ett system, DFDE, som dominerar fartygsbeställningar i dagsläget. Det finns även nyare system som består av gasdrivna tvåtaktsmotorer som förväntas ta över en del av marknaden.

Detta examensarbete var en del i ett större projekt på ProElec AB i Söderhamn. Företaget ville ta fram en ny produkt i form av en displayenhet som ska kunna kommunicera med ett annat system via en operatör och ett CAN-protokoll. Användargränssnittet (GUI) i produkten understödjer växelverkan mellan en operatör och exempelvis ett hydrauliskt system på en grävskopa. Syftet med detta arbete var därför att hitta en bra metod som kan användas för att utveckla ett applikationsinterface (API) som sedan används för att implementera detta GUI på displayenheten. Enheten består av en mikrodator och en LCD-skärm och är ett system som har begränsat med minne och resurser.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.