There are two species of potato cyst nematode (PCN), the yellow, Globodera rostochiensis, and the white, Globodera pallida. Each of them can appear in different pathotypes. These are separated by testing the nematode ability to multiply on a number of potato cultivars with different resistance properties. The aim of this project was to examine the virulence of Swedish and foreign PCN populations and to compare two test methods. Biotests are today the only available tests used to study virulence.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

This thesis focuses on the testing activities at the stages of development and change regardingintegration brokers. The study aimed to examine the overall challenges that exist regarding thetesting activities within this context, and the thoughts towards the development method testdrivendevelopment (TDD). TDD emphasizes high level of test coverage and where the testprocess is well integrated with the development process. To seek answers to our question weapplied qualitative interviews with companies and respondents to try to understand the globalchallenges that are related to this work and processes. The main conclusions presented in thisstudy is that the overall challenges are involving and educating project participants in the testingprocess activities and the contributory effect test have on the end product.

Thesis purposeThe study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. MethodologyThe effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

Systemutveckling har på senare år rört sig mot allt mer flexibla metoder för att bedriva utveckling, ett agilt förhållningssätt vid systemutveckling i dagens IT-bolag är inte alls ovanligt. I takt med förändring av tillvägagångssättet har även ett moment inom testningen fått allt mer fokus: Testautomatisering. Vissa författare hävdar till och med att det inte går att bedriva agil systemutveckling utan att införa testautomatisering. Syftet med uppsatsen är därför att undersöka vilka utmaningar en testare inom de agila metoderna stöter på vid testautomatisering. Detta utförs med hjälp av intervjuer på fem olika företag av fem olika testare där de alla har en gemensam nämnare, att de jobbar agilt..

The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the testing itself has been toward unit testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

Tryckhållfasthetsutveckling hos broar. En studie av svenska broar byggda under 1900-talet.

Oestrus in dairy cattle has changed over the last decades, the duration has decreased and the intensity of oestrus has declined. A possible explanation can be their high and increasing milk production. Heifers ability to show oestrus is probably not affected to the same extent. The aim of this study was to estimate and compare oestrus duration and strength in heifers of the Swedish Red and Holstein breeds. Standing oestrus has been the primary oestrus sign during many years.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

Term: Spring term 2007Study objects: Reitan Servicehandel AB, Vi-butikerna, ICA Sverige ABPurpose: The purpose of this study is to analyse how procurement is used as a strategy to achieve better competitive strength, within the retail food industry.Theoretical: The theoretical chapter illustrates different procurement organisations, multiple and single sourcing, brand equity, consumer behaviour and involvement, Efficient Consumer Response including supply chain and category management and finally Demand Chain Management.Method: For the case studies, three food retail companies have been interviewed: Reitan Servicehandel AB, Vi-butikerna and ICA AB. To illustrate how consumer behaviour influences retail food market, several secondary consumer research studies have been analysed.Conclusions: The results indicate that the procurement organisation can achieve a better competitive strength by a centralised organisation, which make it possible to improve conditions of terms when ordering higher purchase volumes. The sourcing strategies can improve a company?s power within the supply chain. All companies within the study had a very good knowledge about consumer behaviour.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.