AimThe purpose of this study is to investigate whether there is scientific evidence that exercise and/or manual therapy can improve function, in terms of increased mobility and strength on shoulder impingement-like symptoms among athletes. Another aim is to investigate whether these interventions can reduce shoulder pain.MethodA systematic review was conducted in the databases PubMed, CINAHL, PEDro and Amed. A total of thirteen articles were selected for further review and compilation. They were then graded for level of evidence according to the PEDro scale and the Swedish Council on Technology Assessment (SBU).ResultsThe systematic review shows that there is strong scientific evidence that acupuncture and heat can reduce pain in athletes diagnosed with supraspinatus-tendiopathy. There is limited scientific evidence that exercise increases strength, limited scientific evidence that stretching increases mobility and insufficient scientific evidence that a combination of treatments, with both exercise and stretching, reduces pain and increases function in overhead athletes.ConclusionsExercise and manual therapy can reduce pain and/or improve function in terms of increased mobility and strength in athletes with shoulder impingement-like symptoms.

Abstract 1.The purpose of this study was to investigate the effects whole body vibrations on maximal strength, power output and neuromuscular activity in m. pectoralis major during bench press.Participants consisted of 35 male and 9 female military high school students (m=23, 1 years). On the basis of initial maximal performances in bench press the participants was divided into two experiments groups and one control group. Intervention groups performed a specifically designed push up program on a vibrating plate respectively a step board during 12 weeks Initial load at 60 % of 1 RM showed an average of 46, 5 kg. All groups showed an average increase of 13 kg for each person after 12 weeks.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Abstract The core is the center of gravity in our body. Injuries and overload in the joints, is the most common reason for not be able to work in Sweden today. A god strength capacity in the core is important for secure and effective movements, as well for active athletes, as for non athletes. The increased number of employees, who report in sick today, has been correlated with psychological bad health. New methods to deal with mental and physical health problems among people can indicate to the fact that Yoga in the western world has increased its members, due its spiritual and physical recognition in favor of well being.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

Alternative splicing is a process that partly rejects the common definition of a gene ? that one gene codes for one specific protein. By variable combination of coding regions (exons) and exclusion of non-coding regions (introns), formation of several different mRNA-transcripts, and consequently several different proteins, can derive from the same gene. Alternative splicing is an important condition for the development of complex life forms, but it is also a highly sensitive process and inaccurate splicing is the cause of approximately 15 % of mutations that cause genetic diseases. This article presents four genes, BRCA1, BRCA2, ER? and ER?, and inaccurate splicing of these genes increases the risk of developing cancer, particularly breast cancer and ovarian cancer.

Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This essay is about testing the validity of an article written by Jonas Löwgren, called The use qualities of digital design. The study we have executed is about testing the featured qualities of digital design in the article on two search systems located in the library of Stockholm University and Södertörn University respectively to see how they are able to be applied on search systems. To acquire the information for the study, we handed out a written inquire among users of those systems. The result of this quantitative study shows us that many that five of Löwgrens qualities is likely to be present on the systems. Our conclusion is that five of these are appliable on search systems.

Background: Practical blood flow restriction (pBFR) combined with resistance training has been proven to facilitate muscle strength despite training at low intensity. However, research investigating the effects of long-term pBFR-training and its periodization with strength training (ST) at a higher intensity is lacking, as well as the effects of occlusion training on blood lactate levels (BLL) over time.Purpose: To compare the effects of 2 weeks of pBFR training followed by 2 weeks of ST (BFR-ST) with 2 weeks of ST followed by 2 weeks of pBFR training (ST-BFR) on anaerobic performace and BLL.Method: 5 adults (age 23 ± 2 years) with a minimum of 1 year of ST experience were recruited and randomized into BFR-ST (n=2) or ST-BFR (n=3). Anaerobic performance was measured using a 30-s Wingate-test and BLL samples were collected <1 and 5 minutes post-Wingate. Data and samples were collected before the intervention and after the 2 protocols.Results: No differences were seen between groups in anaerobic output or BLL after 4 weeks of training (p>0,1 for all values). A decrease in time to peak power (tPP) were seen in both groups with an advantage for BFR-ST (-37 ± 8 %) over ST-BFR (-27 ± 22 %).

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

Thesis purpose The study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. Methodology The effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database. Theoretical perspective The study is derived from Kapferers (2004) definition of brand equity, where he is dividing the concept into three parts. This study is focused on Brand strength in particular, which is one of the parameters in the above-mentioned theory.