Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

A computer model based on minimization of the free energy, capable to predict contact angles and spreading transitions between Wenzel and Cassie mode for drops placed on surfaces with different topography were implemented in matlab. Simulations were compared with experiments documented in the literature. These showed that reported transitions between Cassie and Wenzel mode can be explained by minimization of the free energy. In this report, a study on the possibility of constructing water repellent paper surfaces with a combination of treatment with octadecyltrichlorosilane and topography changes, is included..

During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.

The aim of this paper is to explain and compare non-compliance of two EU-directives, ?the quality of bathing water? and ?the working time directive?. This study answers the questions: Why didn?t Sweden implement the directive on bathing water quality and the working time directive correctly? Are the reasons for non-compliance the same or different in the two cases? The paper is designed as a case study and with an explanatory attempt we explain why the two directives weren?t implemented correctly in Sweden. The theoretical approach is based on both general- and EU-specific implementation theories.

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.

The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

In many European countries there is an increasing concern about the occasionally high concentrations of nitrate and pesticides in drinking water. The advent of the EU Water Framework Directive particularly highlights this. The directive states that all large drinking water sources should be identified and protected from pollution before 2009 and that by 2015 all water bodies should reach a 'good status'. In Sweden about 60 percent of the drinking water sources have protection areas. This means that about 700 new water protection areas need to be designated before 2009. This will affect many farmers, restricting their farming practices. The purpose of this study was to investigate which methods are used in other countries concerning nitrate and pesticide pollution from agriculture. From this, the expectation was to generate ideas on what could be undertaken in Sweden when designating new protection areas.

This study is based on AgroSeas business idea from environmental problems to valuable resource, with the objective to optimize a method to purify the already eutrophicated Baltic Sea by harvesting water plants, mainly reed. The nutrients will then be recirculated to arable land through residues from biogas production. The amount of nutrients that can be removed by harvesting the biomass depends on the amounts of biomass and the nutrient content of it, which in turn is strongly dependent on the nutrient concentration of the surrounding water. Vegetation suggested in the study for an effective nutrient uptake is helophytes: reed, cattails, reed canary grass, reed sweet grass in shallower water and lemnoideaes: duckweed and nymphaeids in the deeper parts. Competitive species has high purification ability but requires regular maintenance to avoid channeling and overgrowth. Regarding time and method of harvest, effectiveness may be improved by: harvesting plants above the water level and after flowering, a border is kept, harvesting twice a season, a bigger machine and a regular maintenance. This literature has illuminated a major environmental problem and it has been suggested optimizations for a method for cleaning the Baltic Sea through harvesting water plants, but to get a definite answer for the optimal method for each site tests should be carried out, this because many factors determine to what is suitable for each, specific environment. .

The thesis aims to be an informative study for landscape architects and hopes to contributeto an understanding of ways water can be used and managed at sites lacking open, greensurfaces.The title "intelligent water design" should evoke the reader?s thoughts concerning intelligentaspects of water. Text, images and the design proposition give hints about these aspects.In the first part of this thesis, various examples of water design are presented. The chosenexamples are all applicable in urban environments with a high percentage of impervioussurfaces.The second part examines Gjutarplan, an urban square in the centre of Kallhäll, in Järfälla,north of Stockholm. Gjutarplan is first framed in a geographical and historical context.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

The main object of this diploma work thesis is about how computer programs can bea tool to use for work on stormwater investigations. The advantage of using acomputer program compared with calculations made by hand is evaluated anddiscussed. The computer programs that have been used for studies and a sequence oftesting of the possibilities are Autodesks Storm and Sanitary Analysis and DHIs MikeUrban.Focus on sustainable development now permeates the building industry. As a resultstormwater investigations have been conducted in an increasing extent the recentyears. Stormwater is water produced due to precipitation, such as rain and snowmelt.Stormwater investigations normally contain descriptions of existing land use, plannedland use and suggestions of measures and technical solutions for the future disposal ofstormwater.The initial part of the thesis consisted of literature studies on stormwater andstormwater investigations to understand the science.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.