This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

In family firms altruistic effects can arise in order to preserve the ownership of the firm within the family. The family firm may chose to carry or take measures against these effects. Regardless, it will lead to different agent costs. Therefore, the aims of the study were to explain how altruistic effects in family firms exert an influence on the administrative systems and possible counter measures.In order to explain the origin of altruistic effects, we built a theory which showed that the altruistic effects were followed by agent costs. The family can take measures to counteract these original effects.

The purpose of this thesis is to investigate the possibilities for shore side electricity in the ports of Västerås and Köping. A technical solution to connect the vessels to the local grid is suggested and the investigation is also aiming at an understanding of how the environment is affected by the use of shore side electricity. Furthermore, the costs of shore side electricity are considered.The maximum power demand of a vessel visiting the ports today is relatively small, but the ships visiting the ports in the future might have a larger power demand. The suggested dimension for the system is 5 MW and the result shows that the shore side electricity requires the power distribution to the ports to be expanded. The most useful solution in the ports is to connect the ships with 12 kV from a connection box in a pit at the quay.The investigation of the costs shows that it is cheaper for the ships to use electricity compared to the marine fuel.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

At the time being there is limited experience within turbine decommissioning in Sweden and the economic effects are unknown. Despite this, there are expectations that revenues generated by sales of materials will cover decommissioning costs. The model developed identifies thirteen parameters that vary between different types of turbines and that affect the economic consequences of decommissioning. The three most important parameters are turbine location, tower material, and the scope of decommissioning. Trends in the wind energy industry show that these three factors are developing in a manner that increases decommissioning costs dramatically.

Degree project in Logistics, 30 credits, The Business Administration and Economics Programme, Linnaeus University, 4FE05E, Spring 2013Authors: Ida Nilsson & Malin Skacke Tutor: Peter Berling Examiner: Helena ForslundTitle: Increased profit potential by controlling customers? ordering patterns -­? A case study at OatlyBackground:Oatly manufactures and sells oat-­?based products and deliveries are today carried out through an external distributor. The company is going through a re-­?organisation and will in the future be managing stock keeping and planning of deliveries with their own resources. The customers? present ordering frequency and volume differ substantially, leading to unnecessary costs.

Around year 2004, a new service was introduced on the Swedish housing market with the purpose of increasing the sell price, namely homestaging. Homestaging means that a home gets in order before a open house, for example by removing personal affections or the leasing of new furniture. The phenomenon originates from the United States, where it has existed for several decades.Most components, but not all, that is included in the homestaging concept is tax-deductible and this has lead to several questions around the law and foremost within tax law. To elucidate this complexity of problems around the right to deduction for homestaging, the Swedish tax agency, Skatteverket, has formulated a letter stating the authority?s attitude towards the phenomenon.

I have through a case study looked on a milkingfarm in Dalarna and been counting on what it would cost to increase the silagestorage. Today they have to little capacity on the existing towersilo because they built a bigger farm with more cows. The reason is that two families decided to start having the production on one farm together and moved all animals from one of the farms to the other farm. So for that reason I have looked on the costs to build a new towersilo or levelsilo. The goal has been not only to look at the buildingcost but also which operatingcost that is included with the different alternatives. I have taken tenders from two different towersilocompany, Bjurenwall and Svenska Neuero and taken tenders from Abetong for a levelsilo with roof and one without roof. The overall feed requirements on the farm is on 240 tonnes dry extract and the old towersilo hold 110 tonnes dry extract so the need for a new foundation is on 130 tonnes dry extract. I have through cost estimate been counting on the specific buildingcost for each buildingaltenative.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher productivity is advocated. One way to increase the productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

This thesis analyses the cost accounting system KPP and its use within the Swedish health care. KPP is designed to calculate and assign health care costs to individual patients. This would facilitate evaluations and comparisons of the costs for certain diagnosis, patient groups or clinics with a different mix of diagnosis. The study investigates the following questions: 1. Does the KPP-model theoretically work as a cost accounting tool for health care purposes? 2.

After the storm Gudrun in 2005, the Swedish Transport Administration started clear-cutting of railroad corridors to reduce the risk of trees falling down on the tracks. Simultaneously, train accidents with moose and roe deer have become more frequent and the costs for consequent delays and repairs of engines are of growing concern. There is reason to assume that tree-clearance of railroad corridors may have contributed to an increase in number of accidents with moose and roe deer because the cleared areas provide attractive forage and thus may attract wildlife. The objective of my study was to investigate how clearing of trees affected the number of accidents with moose and roe deer. I compared deer-train collision frequencies before and after clearance of the selected railroads and compared these with uncleared control railroads in a BACI (before-after control-impact) approach.