A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

As the companies of today are good at protecting themselves against external threats, but are having problems with internal threats, we focused on how information can be protected from ending up in the wrong hands. First and foremost to protect information from employees who might steal it and sell it to another company. Since the security investments needed are connected to the financial costs of implementing them we have tried to create a balance between the investments needed and the cost of implementing them. The different kinds of protection needed are first and foremost protection to make data less accessable, passwords and traceability. While it is hard for us to estimate the amount of money a company lose by the hour when the production stands still, we have not been able to use any of the excising models to calculate the profit of installing countermeasures.

Detta arbete tar upp begreppen etik och moral samt hur etiska teorier kan användas för att analysera ett visst handlande. Både generella etiska teorier samt en etisk modell/teori, kopplade till arbetet som offentlig tjänsteman, tas upp för att se på fallstudien ur ett etiskt perspektiv. Fallstudien är en händelse som utspelade sig på Gotland under sommaren 2009. Det var ingen vanlig storm som drabbade ön i Östersjön utan en väldigt intensiv ?mediastorm?.Dåvarande landshövding Marianne Samuelsson och storföretagaren Max Hansson var de två huvudaktörerna.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

Companies use different forms of representation to promote business negotiations. The regulations for the right to deduction for the cost of representation are stated in Chapter 16 section 2 of the Swedish Income Tax Act (IL). According to the law there must be an im-mediate connection between the expenditure and the business practice and the claimed de-duction must be reasonable. The Swedish tax authority publishes general recommendations regarding representation which are used as guidelines for the tax payer to follow. The gen-eral provision about tax deduction can be found in Chapter 16 section 1 of the Swedish In-come Tax Act (IL), stating that expenses to acquire or retain income shall be deductible.

The purpose of this essay was to try to find out if the optimal farrowing pen exists. By interviewing producers, veterinarians and salesmen and also through a literature study, I have tried to evaluate advantages and disadvantages regarding different types of pen formations and environmental details. The interviews with the producers showed that they all were satisfied with their particular farrowing pen. It also showed that one material can be functional in one farrowing pen but not in another. The determining factor for the outcome of the farrowing pen was the individual experience and the way of thinking of the producers. The veterinarians were of the opinion that there today were no existing farrowing pens that responded to the pigs needs. However, the results on the farms were generally good. The salesmen thought that the production costs could be lower if a sort of a standard pen was used.

Mankind faces a serious threat. Its activities, for example the burning of fossil fuels, have led to an enhancement of the greenhouse effect - something that has given rise to a global warming. The climate is becoming warmer, a change that has important effects on the nature as well as for humans and their society. Sea level rising, extreme temperatures are becoming more common, glaciers and other ice caps melt and storms becomes more intense when they appear. The main cause is the emission of greenhouse gases into the atmosphere - carbon dioxide in particular.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.