The tomato is an important crop worldwide, and in recent years it has received great attention due to its rich content of carotenoids, which in studies indicate to have health benefiting properties. Many studies have been done in this area of research and in how to optimize the carotenoid content in tomatoes and tomato products. The objectives of this essay were to summarize present data in this field. The results were as follows:There are nine different carotenoids identified in tomatoes. Lycopene and ?-carotene are the ones that have been given the greatest attention.

AbstractTerrace III in the Birka Garrison. An analysis of function based on artifact quantification and find preparation. This paper deals with Terrace III in the Garrison of Birka, Uppland, Sweden. The main purpose is to investigate the function of Terrace III. The analysis consists of two parts.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

Milk and milk consumption has been subject of discussion for a long time, and is still a hot topic. Recently, as study was published that observed a correlation between milk intake and increased risk of fractures and mortality. The authors proposed the milk?s content of D-galactose as the possible mechanism, since D-galactose is used indicated ageing in animal models. Therefore, this study aims to develop a method to determine the amount of galactose, glucose and lactose in milk and fermented milk and apply it on to dairy products on the Swedish market.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

In Sweden the climate makes it impossible to feed fresh herbage to cattle during many months of the year. During periods when preserved forage must be supplied it is important that this forage is stored in such a way that high quality is retained, both nutritionally and hygienically. Furthermore, it is essential that losses occurring when handling and storing the forage are kept as low as possible. This study compares storage in tower silos, bunker silos, big bags and bales,estimating dry matter losses as well as losses in metabolizable energy and crude protein that occur during storage. The results show that tower silos, bunker silos and big bags, the systems with the largest amount of forage and a long feed out period involve larger losses than bales, which are fed out immediately after being opened. As the feed out rate influences the losses, tower silos and bunker silos should be used during the period of the year when the feed out rate is as high as possible, i.e.

The purpose of this study is to examine how employees in an organization using flexible work practices, experience that passive face time influences the evaluated of them. Further, the study aims to understand to what extent that perception of passive face time motivates the employees to spend more time at the office than is necessary for their work situations. The study concludes that employees in general perceive that passive face time does influence how they are evaluated and that this perception motivates employees that are relatively newly employed by the company to spend more time at office..

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

The purpose with this work was to investigate some alternatives for an effective handling with grain, to find the most economic alternative. It is not common that moisture content is below 14% when harvesting grain in Sweden. To store the grain safe it has to be preserved in some way. I have described some of the most common systems for preserving grain in this paper. I have used the systems as a basis when I made calculations in handling the grain for a company. I have chosen a company placed in south of Sweden. The productions are crop farming and pork.

Totally 84 differentially expressed mRNA clones from infective L3 larvae of the parasite Haemonchus contortus, a blood sucking nematode, were analyzed with single strand hybridization assay (SSH). Altogether 79 clones were sequenced, edited, and compared with proteins found via BLAST in GeneBank. The aim was to investigate gene expression and potential protein expression following storage at 5 °C for 32 weeks. mRNA was extracted from fresh and stored L3. The SSH derived products were cloned into E.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

AbstractTitle: Interactive marketing and Internet - A study of Radi Medical Systems? educational site (Interaktiv marknadsföring och Internet - En studie utifrån Radi Medical Systems webbplats för kundutbildning)Number of pages: 43 (including enclosures 47)Author: Daniel PalmgrenTutor: Mats LindCourse: Media and Communication Studies CPeriod: Spring 2008University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: The aim of this thesis is to examine if Radi Medical Systems? educational site has the potential to create value for the company?s customers, and by that promote improved customer relations. Questions asked are: What kinds of visions does the company have for the site? Which services are offered to the customers through the site? How do the customers experience these sInervices?Material/Method: Information from interviews with representatives from Radi Medical Systems and their customers, observations of the webpage and information from an internal Radi document concerning the educational site has been collected and analyzed through the use of a theoretical framework, in order to provide an understanding for the questions asked. The visions were discussed and analyzed by general concepts of interactive marketing and Internet.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.