A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

Platelets are small fragments, but they are of crucial importance for the coagulation. The risk of spontaneous bleeding increases when the level of platelets falls below a thrombocyte particle concentration threshold value of 50 x 109/L. In those cases a platelet transfusion might be compulsory. Ongoing research tries to improve the quality of the platelets and to increase the safety of the method used. However, we still need to better understand which factors that affect how patients react upon platelet transfusion.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

Since Internet has become a more important and more certain source of information the user require greater and more demands than ever before on the layout and function of different web pages. When search engines gives us the opportunity to millions of hits in just a fraction of a second it?s essential to optimize the structure and architecture, which forms the foundations of all the content. In a time when a company?s digital footprint plays an important role for the costumer and the transmitter it?s of utmost importance to have a steady, well-structured foundation to build new platforms of information on.But how do you manage to build a good foundation? Some of the most important key elements in Information architecture are Organizing, Navigation, Search and Labeling.The aim of this study was to create guidelines for a user-friendlier interface, by analyzing the principals and gathered data.

Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

Ethanol for automotive purposes is an issue much debated and researchers disagree about the benefits of bioethanol. Converting energy-rich crops into ethanol suitable as motor fuel is a complex process and continuous development and improvements of processes and material used are important steps in the work of developing environmental friendly fuels. Grain is usually preserved by drying which consumes a lot of energy. Alternative storage of high-moisture grain in airtight storage systems reduce the energy required to produce bioethanol and studies have also shown that ethanol yields are increased more than 10% in ethanol fermentations of moist grain compared to dry. Airtight storage is often not perfectly airtight so biocontrol agents are necessary in order to preserve the grain.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

This thesis is intended to review and create a greater understanding for the history and originsof printed scraps from late eighteenth century to the beginning of the twentieth century.A questionnaire survey was sent out to several Swedish museums, containing questionsconcerning their collections, possible exhibits, special difficulties and types of damagesconcerning scraps and their current storage. A visit to the Gothenburg city museum storagewas made to take a closer look at their scrap collection and how they were stored. Thisresearch resulted in an understanding regarding the current situation of printed scraps, whichunfortunately appears to be quite poor and inattentive. These results are presented in the firstchapter.The second chapter describes the history of printed scraps, followed by a chapter presentingrelevant printing techniques and technology. This is followed by various chapters dealing withhow the printed scrap has been used through the ages, history and development of motifs andthe album's significance.

This thesis have been performed at Sweco Position in Jönköping. The work was split into two, where one part included an investigation regarding the possibility of developing a cross-platform GIS (geographic information system) with HTML5 and CSS3. A prototype would also be developed within this part.The second part included development of a cross-platform GIS for a client to Sweco Position. The client operates in the forest sector and had already an existing solution, with many problems. The client required an application with delimited functionality and which was not bound to a specific hardware.As the client users often were located in areas with limited Internet access, one additional requirement was that there would be some offline support.The students handle subjects within development of GIS, for example map projections, map services and mapping libraries.The application came to be developed in HTML5 and ASP.net.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.