Author Cocitation Analysis (ACA), multidimensional scaling (MDS) and Social Network Analysis (SNA), has been used to analyze and visualize the invisible college of the journal European Union Politics. The concept invisible college was first introduced in the fifteenth century, through the creation of the ?the Royal Society of London?, and it was reintroduced in the 1960:ies and the 1970:ies by scholars such as Price and Crane. It is said to have been interpreted in as many ways as there are authors who have used it. Here it has been used synonymously with the term citation network.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

In 1994 the EU directive of packaging waste was adopted. The result was that all EU member states developed different systems to manage packaging waste and recycling. This paper examines the various systems and the factors that affect the level of recycling. This is done by a cross-sectional study between countries. The results of my study suggest that take-back system generates less recycling than other systems, the mandatory deposit system can affect the recycling in a positive way.

In Sweden, the labour movement historically had influenced both society and politics. In recent times, it is considered a change in society with a stronger employer party while the unions weakened by reduced unionisation. This study aims to highlight the presence of individualistic and collectivistic approaches to the labour market in relation to union density. The different approaches are investigated in the labour market by means of a quantitative survey. The study's survey items are workers in the timber industry.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

ABSTRACTCan Danish experience explain why Sverigedemokraterna had a higher support among voters in Skåne, than among other Swedish voters?Essay in Political Science, C-levelAuthor: Jenny WoodTutor: Gregg Bucken-KnappAutumn 2006/ Spring 2007The key question of this essay concerns the outcome of Sweden?s latest election. When all the votes where counted, the county of Skåne showed an exceptionally high support for the right wing nationalist party Sverigedemokraterna. Why then, did Sverigedemokraterna have a higher support among voters in Skåne (as part of the larger and transnational Öresund region), than among other Swedish voters? My hypothesis is the following: the regional interaction within Öresund has not only had positive effects concerning the values that the people of Skåne hold.

Aspen (Populus tremula L.) and goat willow (Salix caprea L.) are two important tree species in the aspect of nature conservation. Due to the elimination of forest fires, a former negative attitude towards deciduous trees in forestry and a strong herbivore pressure, these tree species have been negatively affected during the last fifty years. The aim of this study was to investigate whether the occurrence of aspen and goat willow could be related to either human impact or to site properties, such as ground moisture and vegetation type. A side study included an inventory of a number of cyanobacterial tree lichens on aspen and goat willow in order to try to relate the occurrence of these lichens species to stand history and stand properties. The study was performed in Hamra State Forest in northern Dalarna. Nature reserves were compared with stands in managed areas.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

The purpose of this study was to investigate the effect of educational and vocational guidance, refer-only high school students tend to stay on their first selected program or to change the program. The theories used in the study deals with young people's choices and choosing education and vocational and life role as a student. The method was quantitative, descriptive survey. High school students in grades three, from two high schools, were asked to answer a questionnaire about perceived educational and vocational guidance. Convenience sample consisted of 162 respondents (N = 162), 86 women and 76 men.

The wastewater treatment plant at GE Healthcare's facility in Uppsala deployed a three step vacuum evaporator in 2007. The purpose of this was to pre-treat wastewater containing amines. The purpose of this thesis was to optimize thisprocess by reducing the amount of concentrate without releasing more nitrogen tothe environment and to examine if density could be used as a measurement of whenthe process should be ended.To create a foundation for optimization six test cycles were conducted with samples taken from all three steps. Both concentrate and condensate were tested as well as the incoming solution. Furthermore, the thesis has been expanded with a benchmarking part examining two different evaporators.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

Abstract The increased focus on social capital theory has made its way into labour economics. This has led to the creation of a vast literature about the use of networks and informal search methods in the labour-market, a literature that to some extent also deals with immigrants search behaviour and their relatively high unemployment rate. Characteristic for the literature in the area is the lack of analysis of actual networks. Which types of contacts do these networks contain; how are the networks used in the labour-market; and which type of network generates a high amount of social capital. These questions are important for the general understanding of how social capital functions, within the labour-market, but also for the understanding of how immigrants use their networks in order to find themselves jobs.