Sök:

Sökresultat:

127 Uppsatser om Stem canker - Sida 5 av 9

Förtolkning inför skogsbruksplanläggning med laserdata (NNH), eller traditionell flygbildstolkning?

The purpose of this study was to investigate produced laser data from the new national height model's airborne laser scanning in Sweden, what quality it has and whether it can be used for forest management planning. From airborne laser scanning one can obtain information on forest variables such as tree species, height, diameter and basal area. Norra skogsägarna is the principal employer of this project and they wanted know to the quality of the laser data which needs to cope with their standards. If the laser data the quality required it can replace some of the operations performed by field planners. To examine the quality of the produced laser data a control tax assessment has been performed in 30 forest departments. This was done in an objective manner.

Analysis of Raspberry ringspot virus in raspberry by amplification of RNA-2

So far, only limited research has been carried out on viruses infecting raspberry, even though the diseases that these viruses cause result in economical losses for raspberry growers. Raspberry ringspot virus (RpRSV) belongs to the family Comoviridae and the genus Nepovirus. Nepoviruses are characterized by their icosahedral virus particles and bipartite genome of single-stranded (+) RNA (RNA-1 and RNA-2). These viruses are transmitted mainly by nematodes of the genus Longidorus, which feed on the roots of plants. RpRSV causes disease in raspberry, grapevine, strawberry and many other plants.

Belöningssystem : En fallstudie av Handelsbanken och Swedbank

För att nå uppställda mål har organisationer valt att använda sig av belöningssy-stem som motivationsfaktor. Det kan innebära extra ersättningar utöver den fasta lönen som används som ett styrningsverktyg för att skapa ett incitament till den anställde. Bonus räknas som en extra ersättning utöver lönen och speciellt bonus har diskuterats flitigt i media den senaste tiden. Utifrån resonemanget har vi funnit det intressant att göra en uppsats om hur medarbetarna i Handelsbanken och Swedbank påverkas av belöningssystemet för att nå de uppställda målen.Syftet med vår uppsats är att beskriva hur belöningssystem påverkar medarbetarna att uppnå målkongruens inom Handelsbanken och Swedbank. För att kunna besvara vårt syfte har vi ansett att en induktiv ansats med kvalitativ fallstudie som vetenskaplig metod är mest lämplig. För att genomföra vår uppsats på ett utför-ligt sätt har mestadels av datainsamlingen utförts med hjälp av kvalitativa intervjuer. De slutsatser som framkommit i uppsatsen är att icke-monetära belöningar utgör en större motivationsfaktor än monetära belöningar i eftersträvandet av målkongruens.

Krafter på rörsystem vid transient flöde : En jämförelse mellan RELAP5 och Fluent

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

Energieffektivisering i flerbostadshus : Undersökning av lönsamheten med energieffektivare ventilation

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

Etiska aspekter av preimplantatorisk genetisk diagnostik och genterapi

The research in the field of biotechnology is rapidly developing all over the world. Modern biotechnology offers unique opportunities, simultaneously as it gives rise to a number of ethical issues. Preimplantation genetic diagnosis (PGD), PGD/HLA (Human Leucocyte Antigen) and germline gene therapy (GLGT) are controversial techniques. PGD gives a possibility to identify a genetic disease prior to the embryo?s implantation in the uterus.

Utveckling av ett användbart IT-stöd : för att stödja operativa arbetsrutiner

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

Energisparläge i automationsindustrin : Potential för att minska tomgångsförluster med industriella styrsystem

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

System fo?r automatiska rekommendationer av nyheter och evenemang

Teknik och data a?r nyckeln till att Bonnier Business Media (BBM) ska kunna na? sina ma?l och leverera ytterligare tillva?xt. Da?rfo?r vill man ligga i framkant na?r det ga?ller att underso?ka nya tekniker som kan fo?rba?ttra plattformarna och go?ra dem mer tidsenliga. BBM har bland annat velat ta fram ett rekommendationssystem som ska anva?ndas till att go?ra inneha?llet individanpassat pa? webbplatserna och pa? ett effektivt sa?tt presentera detta sa? att de olika ma?lgrupperna fa?r den information de fo?rva?ntar sig.

Diagnostikmetoder för ångreglerventil med servomotor

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

Drömjournalen : En studie av vårdmedarbetares upplevelser av samtida och framtida vårdkommunikation

The effectiveness of communication in the Swedish healthcare system context has long been the subject of debate. Issues stemming from usability, accessability and interpretation affect the lives of patients, and yet the vocal groups in the healthcare communication debate are patients and administrators, not healthcare professionals. With the advent of eHealth services and new demands being put forth on the ability of healthcare professionals' to handle increasingly numerous and innovative systems, it is of more importance than ever to understand the healthcare professionals' work context. This article is based on interviews with five healthcare professionals concerning their views on electronic health records (EHR), eHealth services, trends in healthcare services development in Sweden, as well as their views on the future of eHealth solutions and health information technology (HIT). Analysis of collected information shows an apprehension among healthcare professionals towards electronic communication, as well as a dissatisfaction with the usability of modern healthcare systems.

Flygburen laserskanning kopplat till skördarmätning för datainsamling till operativ planering :

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

Stump treatment with the root rot antagonist phlebiopsis gigantea : - sensitivity of P. gigantea spores to high pressure stress; - reduced water consumption for stump treatment

Stump treatment today requires large quantities of clean water mixed with the protective product Rotstop, to fully cover the stump surface. In order to reduce the water consumption without reducing the coverage of the stump surface, the pressure in the stump treatment device can be increased. Therefore, the Phlebiopsis gigantea (Fr.) Jül. suspension used as a biological control agent to prevent Heterobasidion annosum (Fr.) Bref. infection was pressure-tested.

Med fokus på slutet av tunneln : anhörigas upplevelser av sin livssituation i den akuta fasen av allogen stamcellstransplantation

Syftet med den här undersökningen var att beskriva hur anhöriga upplever och hanterar sin livssituation, med fokus på familjen och deras egen hälsa, under den akuta fasen vid allogen stamcellstransplantation. Undersökningen ägde rum på Centrum för Allogen Stamcellstransplantation vid Karolinska Universitetssjukhuset Huddinge. Sju anhöriga till patienter som genomgick en allogen stamcellstransplantation deltog. Metoden som användes var att genom semistrukturerade intervjuer låta anhöriga själva berätta om sin livssituation. Dessa intervjuer analyserades sedan med hjälp av kvalitativ innehållsanalys vilket resulterade i att temat den nuvarande situationen formulerades.

Cassava as an additive in biomass fuel pellet production :

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

<- Föregående sida 5 Nästa sida ->