The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

This is an empirical cross-sectional study with the aim to examine the patient?s comprehension about their quality of life within two to seven years after their stem-cell transplantation with reference to physical, social, emotional, psychological and functional wellbeing and to investigate if the patient groups have disease specific problems. Differences in quality of life between men and women and also between allogeneic and stem cell transplantation with an unrelated donor (URD) were studied. The measurement Functional Assessment of Cancer Therapy (FACT) and the bone marrow transplant subscale (BMT) is a 49 item, valid and reliable measure that was used. The questionnaire was answered by 43 of 47 patients (91%).There is a significant difference between men and women in physical, social and functional wellbeing.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

Background: The increasing competition on the market demand both companies and supply chains to find optimal solutions. The edeavour to reduce inventory levels is a part of this. Earlier, inventory was seen upon as valuable assets, but today they tend to be more and more negative in the eyes of the companies. Inventory demands capital, handling, and space. Therefore inventory creates unnecessary costs.

Myxomatous mitral valve disease is a common disease in older dogs of small- to medium-size breeds. The mitral valve, and less commonly the tricuspid valve may be affected which causes them to leak blood from the ventricle to the atrium of the heart during systole. With increasing severity of mitral valve leakage the forward stroke volume ejected into the aorta decreases, which may lead to an increase in blood pressure in the pulmonary vein resulting in pulmonary edema. A decrease in cardiac output may lead to a decrease in blood pressure, but the body may respond in order to normalize the blood pressure. Franzén showed in 2007 that the systolic blood pressure was increased in dogs with severe mitral insufficiency.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

Stem rust, Puccinia graminis, has caused enormous yield losses throughout history which have had significant consequences for oat and wheat production. Today in Sweden stem rust is only reported from rye, oats and wild grasses. Stem rust infections in wheat have become unusual due to the general use of resistant wheat varieties and also due to the eradication of barberry, Berberis vulgaris, the alternate host for P. graminis. According to international sources, new races of P.

The main purpose of this study is to investigate the productivity effects of multiple tree handling in thinnings. Other important elements have been to investigate in which extent multi-tree handling is used in stands with different stem volumes and the impact of collecting partially delimbed fuelwood assortments has on harvesting performance. The study is based on data from thinnings in Sydved and contractors' operating activities. Collection and compilation of operating schedules, number of stems and surveyed volumes from several contractors and a large number of executed orders underlying the results. Multiple tree handling is used to a much greater extent at lower average stem volumes. Prediction models for productivity of the multiple-tree handling harvesters in the study differ from the productivity models for single-tree handling. In the model developed in this study productivity is not as dependent of stem volume as reference models.

To increase the knowledge about the growth of hazel (Corylus avellana)and size distribution of the shoots, circumference and stem diameter wasmeasured in a total of 54 clones in two areas in Östergötland. Further, thewidth of growth rings was determined for separate years. The diameter ofthe stems was measured both out from the centre of the stem andperpendicular to the first measure. The stems showed only a weaktendency to have an oval shape (with the longest side outwards from thecentre). The growth model did not improve when the degree of sunlightof clones was taken into the account.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.