New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture Steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for Steel strips and is used for example with hardening of the Steel strip. The assignment has been to solve the problems encountered by some customers within this product.

A storm in January 2005 felled 75 millions cubic metres of forest in South Sweden. Previous studies of wind damage in thinned stands indicated the importance of early thinnings. The risks of wind throw increased by increasing age and height of the stands. Previous studies also indicated increasing risk of wind throw along the strip roads. The aim of the present study was to investigate wind damage in Norway spruce stands in South Sweden in relation to time of the first thinning and different pattern of strip roads (width, length and direction).

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for Steel strips and is used for example with hardening of the Steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

Titel:Att förmedla budskap med Steel - Hur SSABs anställda uppfattar personaltidningenFörfattare:Tobias Anderberg och Daniel KarlssonUppdragsgivare:Svenskt stål AB (SSAB)Kurs:Examensarbete i Medie- och kommunikationsvetenskap vid Göteborgsuniversitet, Institutionen för journalistik, medier och kommunikationTermin:Vårterminen 2011Handledare:Jonas OhlssonSidantal:45 sidor, 11 616 ordSyfte:Att ta reda på om företagets personaltidning förmedlar mål, vision ochvärderingar så att de anställda identifierar demMetod:Kvantitativ webbenkätMaterial:Webbenkät med 293 svarande av totalt 712 anställdaHuvudresultat:Resultatet visar att budskapen om mål, vision och värderingar i Steel kan identifieras av läsarna. Steel upprätthåller denna kunskap. Det är inte någon stor skillnad på vad de anställda tycker om tidningen sett till vilket affärsområde de arbetar i. Det som de allra flest förväntar sig och får är kunskap om SSAB. De flesta anställda förväntar sig dock mer än vad deanser sig få ut av tidningen.