This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

The project was performed at SiemensIndustry Drive Technologies with theobjective to provide actual values forthe energy savings potential withinSiemens scope of practice.In Sweden the electrical drives standfor about 30 % of the total electricityconsumption and about 60 % of theelectricity consumption within theindustry. During the pre-study phaseelectrical drives with pump applicationswere identified as large energy users.Because of this a case study at one ofSiemens customers, Stora Enso Fors wasperformed. The system that was evaluatedduring the case study was a throttledsystem with a centrifugal pump forpumping pulp.The results yielded that a saving ofover 50 % could be achieved by replacingthe throttle valve with a variable speeddrive, a frequency converter. Thepayback period was two years and twomonths and the present value for thetotal life cycle cost of the variablespeed system was 662.566 SEK lower thanfor the throttled system. As aconsequence, Stora Enso Fors is advisedto invest in a frequency converter forregulation of the system.The general conclusion is that a focuson system efficiency is the mostimportant factor in energy efficiencyprojects and that the system regulationmethod has a large impact on the overallsystem losses and hence its efficiency.Energy efficiency potential forthrottled systems with centrifugal pumpsis large and significant economicalsavings can be made through investmentswith short payback time..

The intention of this essay has been to investigate how the new digital technology has affected the tourism industry and marketing, as well as how travel agents and tour operators adapt to this. We also aimed to get a broader view of how the future might look like when it comes to marketing and virtual service landscapes. We decided to base our research according to these following four questions:? What affect travel agents? way of adoption to the technical development?? What purposes do the travel agents have for building up their virtual service landscape?? How much does the travel agents emphasize on digital marketing?? What can travel agents do to better adapt to the technological development in the future?We have chosen to use a qualitative research for this essay. The reason for choosing a qualitative research was to gain a wider understanding that would represent a big part of the changes of technology development.

It is a difficult task to define the little word ?modernity?. One may argue quite a lot about what modernity is as well as when modernity breaks trough. The burgess class was the group who initiated modernity in most cases. Since these people mainly dwelled in the cities it was in the cities were modernity started.

The purpose of the essay Multi criteria analysis of potential conflicts concerning land use planning - natural stone mining in Lysekil municipal is to study possibilities and limitations in GIS based multi criteria analysis as a tool for land use planning. How GIS based multi criteria analysis can be implemented to localize potential conflict areas between natural stone mining and other land use activities and what advantages and disadvantages the method holds are the main issues of this study. The essay studies these questions through a case study, concerning the geographical area of Lysekil municipal in western Sweden and problematizes the interest of natural stone mining in relation to other land use interests. A literature study was carried through, concerning multi criteria analysis and planning. After collecting and processing of data the multi criteria analysis could be implemented in the ArcGIS tool Weighted Sum.

Organic cotton has been in the medias field of vision for quite some time. This interestalso reflects in a growing awareness in the textile industry where more and morecompanies today offer organic cotton in their product range. With this in mind wequestion whether organic cotton has become a viable commercial product. We alsoacknowledge there is a lacking of understanding the complex problems that organiccotton manufacture involves, for example the huge effort and cost required for a transitionfrom conventional to organic cotton farming.The purpose of this paper was to study how textile, ecology and competition today arebeing combined by companies. We wanted with our investigation to find out whethercompanies in the textile industry use ecology as a competitive advantage.

According to recent statistics the construction industry is responsible for the largest waste discharges of both dangerous and non-dangerous waste, when disregarding the "non-dangerous" amount of granite waste produced by the mining industry and the waste produced by the pulp and paper industry. Preventive work within waste management is an ongoing practice so to be able to reduce negative environmental effects. One of the most common actions for the companies to take is to separate the different kinds of waste from one another at the construction site. Although by working with the problem in earlier stages of the process a large amount of the waste could already have been reduced.Companies in the construction business that are actively working to decrease environmental impact in their operations often use an EMS (Environmental Management System). By using environmental management as method the company can manage their environmental work so that actions can be taken where they are needed the most.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

Shoplifting is a serious problem due to the fact that about 2 % of a retail store's turnaround dis-appears annually. This paper discusses the problem with shoplifting where a closed retail display of glass can prevent this kind of misbehavior. Hitherto the scientific research regarding how consumers react to a closed retail display is non-existing. With this in mind we want to investigate and enlighten the phenomenon regarding consumer behavior and product appreciation. The study is carried out at a retailer in the beauty industry in Sweden both in stores where the selection of perfumes have been displayed behind glass and in stores in which they have been displayed with open access.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

Syfte: Syftet med uppsatsen är att undersöka hur en entreprenör/ kreatör produktplacerar i bästa mån för att överleva i modebranschen. Metod: Kvalitativ med intervjuer som bas för empirin. Slutsats: Med hjälp av en positioneringsmodell kan entreprenören/kreatören ta ställning till sina konkurrenter och placera sin produkt till den tänkta målgruppen. Teorin hjälper företagare att strukturera upp en annars komplex hantering som i nystartade företag ?bara sker?.

The purpose of this paper is to describe and analyze two factors contributing to child labor in Ghana, one of the world's largest producers of cocoa. These two factors are: poor countries economic and political dependency on the rich countries, political leader?s ambitions and decisions. We will also describe and analyze the UN's efforts and measures to combat child labor. The method we used was a case study of child labor in Ghana?s cocoa industry together with interviews.

AbstractThe purpose for this study has been to discover and reveal what exactly it is that have made the Wallenberg family so successful in the Swedish business world for more than 150 years. We have narrowed our research by limit it to only find and concern the specific features of the Wallenberg family and not their entire corporate group. There is no research made before regarding this matter, as far as we could see, which is one of the reasons to why we find this study relevant. In order to answer our question we have chosen to use a qualitative approach in which we have interviewed three people. These three people all have deep and thorough insight in the Wallenberg family.

Rapporten presenterar en femstegsmetod för hur man kan minska vikten på ett timmersläp med hjälp av omkonstruktion och genom att använda höghållfasta stål istället för vanligt konstruktions stål. Arbetet har utförts åt LuCoil Steel AB i samarbete med Bodensläp AB, släpvagnstillverkare. Jämförelser har gjorts mellan ett befintligt släp, tillverkat av Bodensläp AB, och ett nytt koncept, framtaget med denna femstegsmetod, där LuCoil Steels höghållfasta stål har använts. Arbetet har begränsats till att gälla själva ramen, det vill säga de två längsgående balkarna på släpet och stagen mellan dem. Resultatet är teoretiskt och har inte testats i verkligheten.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.