A prerequisite of an international exchange of information is multilingual tools for information retrieval, such as the multilingual thesaurus. There is an ongoing discussion about the construction of, and the guidelines for, multilingual thesauri. In recent years the praxis as defined in ISO 5964 Guidelines for the establishment and development of multilingual thesauri 1985 has been the topic of a scientific discussion. It has been about how equivalence across languages is to be established when it comes to concepts, terms and relational structures. This masters thesis treats the praxis and practice of multilingual thesaurus construction.

Over the next few years, major investments in healthcare buildings is to be performed. Most surgical theaters are in need of technological upgrades as the technology is outdated. In most cases not only a refurbishment is performed but also an expansion. The basis for expansion, is due to a large increased number of patients, but also to the complexity of the refitment. Partly it's because evacuations are difficult to implement and the disturbance that occurs in conjunction with the refitment.Löwenströmska hospital undergoing a technical upgrad.

Construction projects are organized in different shapes and disturbances in the information flow in these processes can lead to problems, such as delays and/or a lower quality. Therefore, a well-functioning interaction between actors and a well thought out-communication at an early stage is of crucial importance. The main question is "How does the communication of decision and information flow in the building process and what barriers and opportunities can be observed?". This diploma work has been written with guidance from Bjerking AB and to answer this question, a collection of empirical data conducted via semi-structured interviews.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This paper is written as an examination paper at the University of Jönköping. The subject is chosen by Peab Sweden in Jönköping with whom further cooperation has been hold. The aim is to compare building methods and building materials in Sweden, Finland and Germany for further inspiration for Peab?s own market.BackgroundThe development of the construction industry develops new materials and methods to the market which has been forced by shorter construction times and the environment aspect. To pursue the development, further knowledge exchange should exist between the countries.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Low- performing pupils at the construction programme.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

This report discusses the development of an autonomous system that can travel a distance of atleast 30 meters on two wheels. The system, the robot, detects black lines and stops if one isdetected. A remote control can be used to start and stop the robot. The robot is constructed ofmainly steel with smaller, more detailed, parts in plastic. A significant amout of time has beenused to enable the robot to balance on its own.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

This essay examine the meaning produced around bodies and body fat in the queer community, but also in the surrounding straight community. The author has interviewed fat activists, and are using queertehory, to examine and analyze the relationship between body fat and the understanding and construction of sexuality and gender. The author concludes that even if norms around body shape and body fat are overlapping between the two contexts to some degree, they also differ. In the straight community, people with larger body shapes and sizes are punished, and encouraged to stay, or become, slim. However, in the queer community, ?fat? or bigger body sizes are not frowned upon in the same degree.