The business potential of software defined radio (SDR) technology is studied by evaluating whether or not its characteristics correspond to those particular to a disruptive technology. The maturity of the SDR technology concept is illuminated by analyzing the opinions and perspectives of a selection of representatives for different stakeholders in the wireless communications market. Characteristics as, for example, the degree of consensus about the utility of SDR technology and the awareness of features and limitations are studied by application of the theory of technological frames. This theory helps us understand how and when technology evolution takes place. Finally we describe the value network structures of some potentially viable application areas for SDR and suggest some possible business opportunities based on SDR technology.This thesis is carried out as a case study and the research data is obtained from secondary sources, such as literature and Internet publications as well as interviews with people well experienced in the field of wireless communications.

The demands of environmental effects in today?s companies have been increasing more andmore. To be able to withstand customers, cooperatives and government demands the ISO14001 certification should not be neglected.In January 2007 the general management of SAS decided to introduce an environmentalmanagement system for SAS Tech. The work which has been carried out is a part of thecertification process of ISO 14001 which will be completed by the end of year 2009.The aim is to create auditroutines for the company in order to be able audit ISO 14001standard internally which is a demand to get certified and to keep the certification in thefuture. A schedule has been done which audits different part of the standard at every auditduring one year.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Glaciologer har under en längre tid observerat förändringar av glaciärer på Svalbard, att några minskar i storlek och att vissa växer. Avsmältning med ökade havsnivåer och potentiellt ändrad havscirkulation till följd är ett scenario som berör människor över hela värden. Dessa förändringar kan eventuellt förklaras genom att koppla de meteorologiska förhållandena i området till större cirkulationsförändringar.De meteorologiska förhållandena över Svalbard har simulerats med en regional klimatmodell, WRF (Weather Research Forecasting), för tre domäner med upplösningarna 24 km, 8 km och 2,7 km. Modellen har testats i två versioner, standard-WRF med förvalda processbeskrivningar och WRF med processbeskrivningar anpassade för polärt klimat och har drivits med ERA-Interim data, som är en återanalys av de globala väderförhållandena framtagen av ECMWF. Resultaten från WRF har verifierats mot observationer uppmätta av AWS-stationer (Automatic Weather Station).

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

This report is written in cooperation with the Swedish National Road Administration South-Eastern Region in Jönköping. The report is a result of the evaluation to give an answer to the question about how well the function contract has been carried out on the E4 in Östergötlands and Jönköpings län. The evaluation is divided in two hard parameters and one soft.The Swedish National Road Administration is interested in knowing how the standard on the road have been changed during the functions period, which is the reason why the first hard parameter is considering road standard. To evaluate the standard there have been a comparison of values from measures taken every year on the current road stretch. The second hard parameter considers economy.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

This paper describes the evolutionary development of an information system for a small company. The company performs overhaul of forklifts and cleaning machines. The company has already an information system that handles the reports from these overhauls but it needs a supplementary tool that assist the chief planner to plan forthcoming overhauls.It should be able to display coming overhauls in a timetable and eventually print them, either to a PDF file or to a document. The timetables this function produces will help the chief planner and the assemblers to get a good overview of their day-to-day work.The tool needs to be intelligent in that way that it takes into consideration were in the country different assignments will be performed. So that time consuming travels over great distances can be avoided.

Denna studie undersöker hur svenska börsnoterade företag implementerar redovisningsstandarden IAS 36 i praktiken. Standarden är utfärdad av regulatorn IASB och behandlar hur nedskrivningsprövning av förvärvad goodwill ska utföras för börsnoterade företag. Denna standard är sedan 2005 obligatorisk inom EU. Denna standard ses som ett steg mot en harmonisering av redovisningen då den syftar till att öka jämförbarheten mellan företag och länder. Vidare undersöks även om det råder några skillnader i implementeringen vilka är härledbara till företagens storlek.

Genom vår utbildning till belysningsvetare vid avdelningen för Belysningslärapå Tekniska Högskolan Jönköping har vi kommit i kontakt med standard SSEN12464-1. En standard som specificerar belysning för offentligainomhusmiljöer. Det vi fått lära oss under utbildningen stämmer inte överensmed vad standarden säger, vi har därför formulerat följande frågeställningar isyfte att undersöka denna skillnad.· Hur väl uppfyller den europeiska belysningsstandarden den svenskaarbetsmiljölagens intentioner vad gäller belysning?· Kan man uppnå arbetsmiljölagen intentioner med en standard?Genom litteraturstudier och intervjuer har vi undersökt området kring dessafrågeställningar. En analys har genomförts där vi genom jämförelser av intervjuutlåtande och litteratur har fått fram ett resultat.Vi har funnit att det finns meningsskiljaktigheter mellan belysningsteknikenoch belysningsvetenskapen om hur belysning skall planeras och hur man skallkontrollera den.

An ongoing concern within the Intellectual Technological world is the issue of security. There are severe consequences if someone without permission searches a computer for secret information that was left unlocked. In order to prevent this situation from occurring, rules about password lengths or employees bringing personal flash drives into the company should be created and followed.As Internet become a worldwide phenomenon, the use of information technology is growing more than ever. With more use and accessibility to Internet, new threats against companies have also emerged. This report brings up the main issues that a company needs to regulate today.The standard for regulations and proposals for IT-security comes in a document called ISO 17799 and very complicated for those who are not experts in the field.

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.