Sök:

Sökresultat:

9759 Uppsatser om Standard process - Sida 61 av 651

Förbättrar en kvalitetssäkring skördarens dimensionsmätning?

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

En klippt och skuren process : En studie av hur processen skapar värde

I dagens tjänsteorienterade samhälle har företag blivit medvetna om att det inte bara är ändamålet med en produkt som kunden anser värdefullt utan att vägen dit också är viktig. Syftet med denna uppsats är att påvisa hur betydelsefull vägen mot ändamålet (den process som omger resultatet) är för kundens värdeupplevelse samt att undersöka huruvida olika åldrar och kön värderar tjänstens element olika. Som kontrast till tidigare kvalitativ forskning på området genomfördes här en kvantitativ studie, i form av en enkät, för att uppnå uppsatsens syfte. Undersökningen visade att resultatets betydelse fick högst omdömen men att processen ändå var essentiell för kundens helhetsupplevelse. Ett antal processfaktorer, framförallt trevlig och lyhörd personal, visade sig ha stor betydelse för upplevelsen och studien kunde även påvisa åsiktsskillnader beroende på kön och ålder.

Ätstörningens ansikten : en kvalitativ studie om upplevelser och erfarenheter av att kunna anpassa sig till ett friskare liv

This is a qualitative study which purpose is to examine the experiences of the recovery process after a treatment for eating disorders.                                                         The questions we have decided to examine are; how did the women adapt to a healthier life after treatment, what are the women's perceived experiences of the aspects related to identity and identity work, and what external social influence was seen as important for their adjustment process to a healthier life?Methods: We have used computer-supported and semi-structured interviews. There were a total of nine women who took part in the study.                                                                                                                    Results: Majority of these women have been recovered from their eating disorders, but some still have major or minor problems. They found it rather difficult to adjust their life's without an eating disorder.Conclusions: Increased self-awarness led to greater control over the eating disorder. The women could begin to confer the new features that they identified with.

Hur integreras fosterhemsplacerade barn i fosterhem?

The purpose of this study is to better understand, from a foster parent perspective, how the integration process of the foster child is carried out in the foster family. The purpose is to identify the challenges and success factors in the process. The study is based on a qualitative method. The data consist of interviews with six foster families. The study?s theoretical framework is mostly based on system theory and also on the theory of ambivalence.The results show that most of our families considered five factors to be important in order to facilitate the integration process.

Mikrosimulering av korsningen Vasa-/Viktoriagatan: En jämförelse av nuläget och tre ombyggnadsförslag med avseende på framkomlighet, säkerhet, miljöpåverkan och tillgänglighet

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

?Om jag kan, kan vem som helst? : En kvalitativ studie om olika vägar ut ur missbruket

The purpose with this studie was to examine how individuals with experience of a long-term drugabuse describe their transformationprocess, and if this process has contributed to a change in their selfdescription. The studie was delimit to examine the transformationprocess, not in relation to what sort of abuse the informants had, or in relation to gender. The studie anwered questions concerning motivation to stop abusing, how the informants started the drugcareer, and how life as an abuser is described. In the studie qualitative method was used, five semi-structured interviewes were made with individuals who had a long-term addiction in the past. Symbolic Interactionism was the theoretical frame of referense that was used for analyse.

Building Information Modeling : En möjlig modern arbetsmetod för Sweco Theorells AB

To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

Riskabla matrecept :

The aim of the study was to investigate if some selected recipes could be hazardous for man; that is if pathogenic bacteria in raw ingredients could survive the cooking process. The study included three known pathogens, Listeria monocytogenes, Salmonella Typhimurium and Campylobacter jejuni. A known number of the bacterium chosen was added to the raw product. The dish was prepared according to the recipe and then a bacteriological investigation concerning the added pathogenic bacterium was performed. The results showed that all recipes tested could be hazardous; that is the added pathogen was still living after the cooking process..

De fem sinnena

Försök sätta er in i att man får tillfälle att omvandla sitt sommarställe, där möjligheterna till nyttjande varit begränsade till sommarhalvåret, till ett fritidshus med boendemöjlighet året runt. Tänk att man får byta trånga, ogenomtänkta och halvfärdiga utrymmen till stora luftiga ytor med modern standard, hög komfort och smarta förvaringslösningar. Tänk er att ytorna mer än fördubblas och att du faktiskt kommer att kunna förvara en del saker i det nya huset som du tidigare behövt släpa fram och tillbaka mellan fast bostad och sommarhus.Det är vad sju familjer fått möjlighet till och som kommer att vara en del av det här arbetet..

Communicating criteria

In the light of the criticism from the Swedish Consumers? Association towards the actions of modern fund managers on the Swedish Sustainable and Responsible Investment (SRI) market, discussions of change has increased. The reasons underlying a change and communication process are scarcely focused on. Thus, grounded on theories in the fields of Critical Management Studies (CSR), Corporate Social Responsibility (CSR), change and communication, this study analyses how a change of implementing revised SRI communication is carried out at Handelsbanken Asset Management, existing motives for the change in communication, and how key actors can affect the process. A participant observation and in-depth interviews were carried out enfolding a discussion that contributed with a critical analysis and discussion, concluding external motives to be dominant and that key actors of the change process are influential to a various extent.

Beskrivning och rendering av kurvade backspeglar

Driving simulators are a very important part of the research that is done at VTI. Enhancing the realism and creating a better driving experience in the simulators are very important and an ongoing work process for the engineers and researchers who work with the simulators. This project has been done as a part of this developing process and the purpose is to enhance the realism of the rear-view mirrors.Simulating realistic rear-view mirrors has been demanded, not only from the researchers at VTI, but also from car and truck manufacturers. To achieve a realistic mirror view a method to measure and parameterize real mirrors has been developed. The code for the existing graphics system has also been redone to be able to handle the new types of mirrors introduced..

Hållbarhetscertifiering av stadsdelar : En studie av BREEAM Communities praktiska tillämpning i svensk stadsbyggnad

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Utveckling av webbtjänst för BISRapportgenerator på Banverket

Banverket är den myndighet som har ansvaret för järnvägstransportsystemet i Sverige och är enproducent av järnvägsinformation. En stor del av infrastrukturinformationen lagras i baninformationssystemetBIS och Banverket är förpliktad att tillhandahålla den. I nuläget är informationenåtkomlig på ett lätt sätt främst internt. Dessutom ställer dagens samhälle krav på att informationenska levereras enligt standard. Standardiseringsorgan har tagit fram standarder för geografiskinformation som svar på behovet att återanvända och samutnyttja geografiska data.Vårt examensarbete är genomfört på Banverket Verksamhetsstöds IT-avdelning och var inriktatpå att kartlägga standarder för geografisk information och utveckla en webbtjänst för BIS för attöka tillgängligheten till informationen.Rapportens kunskapsbidrag är en analys av standarder för geografisk information som är relevantaför järnvägsnätet.

Föreställande som verktyg för förändrad förståelse: en studie
om elevers lärande av ett särskildt objekt

This thesis attempts to describe the application of variation theory, as developed by Ference Marton, at a Swedish primary school, intermediate level. The aim of the thesis was to investigate some aspects of a learning process. The students were introduced with the theme of ?sustainable ecological development?. This included theoretical and practical knowledge of the art of sustainable living.

Viral Facebook integration i mobilspelet Gravel

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

<- Föregående sida 61 Nästa sida ->