In order to reach the environmental targets, set up by the EU, there are many measures taken to make Sweden more energy efficient. In the housing and real estate sector, an installation of an exhaust air heat pump that reuses the heat in the exhaust air in order to lower the amount of acquired energy, is an example of such an action. The recovered energy can then be used for heating of radiators and tap water. This report aims to evaluate and compare three different systems using exhaust air heat pumps regarding COP, degree of coverage and cost savings. This study was delimited to only account for apartment buildings.The theory chapter describes the different conditions and factors that affect a building?s energy balance.

Bakgrund: Dagens industriföretag har ägnat mycket tid och tankeverksamhet åt att förbättra produktiviteten men i regel betydligt mindre till att beräkna enskilda produkters kostnader. Allt högre krav ställs på en kundanpassad produktion med differentierade produkter. Produkternas heterogenitet innebär även heterogen resursförbrukning och det gör det svårt att veta vilka kostnader en produkt verkligen orsakar. Inom ABC är det kostnadsdrivarens uppgift att koppla samman resursförbrukningen med produkterna. Valet av kostnadsdrivare kan ge stora effekter på produktens kostnad och visa att produkter som tidigare betraktas som lönsamma säljs med förlust.Syfte: Syftet är att beskriva och analysera problematiken kring val av kostnadsdrivare.Genomförande: En fallstudie har genomförts kring val av kostnadsdrivare vid Swedish Tissue.Resultat: Det finns inga optimala kostnadsdrivare utan en komplex avvägning med kalkylens syfte i bakhuvudet krävs.

The purpose of these theses is to show the financial economical situation during the change from conventional dairy production to ecological production. The thesis is accomplished by collecting information from literature and interviews where needed. The target group of these theses is dairy producers who will transform their production from conventional dairy production to certified ecological dairy production. The theses emphasise on the economic situation during the adjustment years. For this I have studied a presently producing dairy farm.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

Companies financed through borrowed capital are allowed a tax deduction for the costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

Gestamp HardTech AB, dotterbolag till Gestamp Automoción, har uppfunnit och utvecklat presshärdningstekniken. Gestamp HardTech tillverkar presshärdade delar och system till bilindustrin. Anläggningen ligger i Luleå och har idag ca 530 anställda. Avdelningen för verktygskonstruktion arbetar med en övergång från CAD-systemet I-DEAS/TDM till NX och Teamcenter. Övergången ses som en möjlighet att effektivisera och standardisera hanteringen av standardkomponenter.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

AimThis paper has come about because of the author's own experience as a project manager at FMV. In various projects, I have wondered if there is a link between the programs and processes that I have to use in my daily work. Are these programs effective for managing projects and follow-up.MethodIn order to examine whether it is efficiently using standard software, I have asked a number of projects manager at FMV to respond to a questionnaire, the method is qualitative.AbstractEfficient project management will require a set of tools for planning, monitoring and evaluating. Often there is a demand for a comprehensive range of enterprise software applications and business solutions combined to one business solution. A relevant question is if it is possible to use standard software, i.e.

Energifrågor och energieffektivisering blir alltmer uppmärksammat i dagens samhälle. Kostnadssituationen för energi är idag helt annorlunda mot vad den var för 30 år sen, priset är numera mycket högre. Speciellt påverkar detta gamla sjukhus där det är installationstätt och det finns aktivitet som pågår i stort sett dygnet runt. Här finns det helt klart en hel del pengar att spara in, frågan är bara var och hur? Detta examensarbete innehåller en energikartläggning av kirurgibyggnaden på Universitetssjukhuset i Malmö, i rapporten ofta benämnd som byggnad 33, samt även en fördjupning kring området ventilation avsedd för operationssalar. Rapporten redovisar inledningsvis en energibalans av byggnaden som har åstadkommits med hjälp av simuleringsprogram, uppmätta värden och beräkningar.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

Nature conservation on certified small private forest owners- a comparison between the two certification systems FSC and PEFC in southern Sweden Today two different certification systems are used in Sweden to certify forest, FSC (Forest Stewardship Council) and PEFC (Pan European Forest Certification). During the last years certification of forests in general and different certification systems have frequently been debated. FSC is a globally widespread system and about 10 million ha out of 23 million ha Swedish forest is FSC-certified. The FSC-standard is mainly used by major forest companies and to some extent also by smaller private forest owners. PEFC is a European system and about 2 million ha Swedish forests is PEFC-certified today.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

The society of today is largely dependent on electricity and the dependence does not show any signs of declining. Reliability of supply will become increasingly important in the future and it is therefore important to investigate factors affecting the failure rates in electrical components.Sweden was hit by several severe storms during the 00?s. As a result of this many overhead lines in forests were cablified. In urban areas underground cable systems have been the norm for many years.