This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

This thesis serves to examine how manufacturing SMEs consider outsourcing. Furthermore, we aim to identify the main characteristics and patterns for these types of companies that can explain their rationale in such a decision. The chosen method for this thesis is abduction and selected research approach is multiple case studies. Seven case studies have been conducted at EAB AB, Esbe AB, Hörle Automatic AB, Pelly Industri AB, SGV Industrier AB, Swede-Wheel AB and Wulkan AB. Our findings have illustrated that although traditional outsourcing theory provides a good platform for explaining the rationale behind outsourcing decisions in SMEs, we have identified additional considerations that SMEs, operating as 2, 3 or 4-tier suppliers towards OEM-corporations, make.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

This thesis describes the design of a tipping trailer, from a company?s demands andrequests to complete manufacturing documentation. The design is developed for thecompany Abexor AB in Östersund that produces tipping trailers. The product issupposed to be used by Abexors customer to transport cargos of different kinds,such as gravel, stone, dirt, etc.The work commenced with a meeting at the company where demands were set.After that a pre-study was conducted to find out what traffic rules were required forthe trailer to be allowed to be driven on roads. Similar products were examined tosee how the trailer could be designed.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This Master Thesis is a product development project that has been carried out in cooperation withSvea Teknik AB. The company has developed an apparatus for attachment of a keel to a hull base ofa boat. The purpose for this thesis has been to compare a new concept of keel attachment incomposite material to thetraditionaldesign solution. This new keel attachment minimizes thedamages that may arise on the keel and the hull of the boat in shape of stresses impacts at grounding.Today it is a problem, relating to keel attachment on sailing boats having a fin keel or a bulbous keel.The manufacture focus on developing larger draught and shorter keel blades. The overall purpose isto increase performance of the sailing boat.The task for this thesis was to develop a concept of keel blade in composite material and investigateattachment to a sheet-shaped element.

Målet med examensarbetet var att skapa ett verktyg för insamling av erfarenhetsdata för produktutvecklingsprocessen. Den skall vara användbar för att bidra till ett systematiskt arbetssätt för produktionsanpassad konstruktion på Volvo Aero Corporation. Det skapade verktyget för insamlande av erfarenhetsdata skall bidra till att produktivitet och producerbarhet kan förbättras på kommande koncept och konstruktioner. En förstudie har genomförts på företaget under hösten 2010 vilket ligger till grund för det beskrivna problemet i examensarbetet.Arbetet avgränsades till att utveckla en struktur för hur metod och erfarenhet skall struktureras och en testversion av verktyget togs fram för utvärdering. Efter samråd med den handledande Verksamhetsutvecklingsgruppen, VU-gruppen, från avdelning 9931 Projekt-, Koncept- och Tillverkningsledning, beslutades att examensarbetet skulle avgränsas ytterligare till insamling av diametermått på komponenten Diffuser Case på Volvo Aero.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:08.