Time of harvest affects nutritional value and digestibility of haylage since plants are in different developmental stages. The aim of this study was to examine the effect of plant maturity of haylage cut in June, July and August on digestibility and faecal particle size in horses.Forage and faecal samples used for the analysis of apparent dry matter digestibility (DMd) and particle size distribution in faeces were from a feed-study performed in the autumn of 2009. Twelve horses were used in the study, divided into three groups in a change-over experiment. Each group was fed haylage harvested in June, July or August during three periods. Faecal grab samples were taken from each horse and pooled so that one sample represented one horse during one period.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Det här examensarbetet behandlar viktsoptimering och omkonstruktion av en lastcontainer genom att använda höghållfast stål. Arbetet har utförts i Luleå åt LuCoil Steel AB i samarbete med Vikströms Åkeri AB. Vikströms Åkeri AB är ett rikstäckande företag med huvudkontor på Storheden utanför Luleå där det även finns en tillverkningsverkstad för lastbilscontainrar. Man har under de senaste åren i samarbete med LuCoil Steel AB börjat tillverka containrar i höghållfast stål för att kunna använda sig av tunnare material och göra dessa containrar lättare än tidigare. Vikten på containrar har stor betydelse inom transortnäringen.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Syftet med detta arbete har varit att underso?ka hur musiker inom den afroamerikanska musiktraditionen ser pa? sitt musikaliska la?rande. Deltagarna har haft olika musikaliska bakgrunder sa? som la?tskrivare, frilansmusiker och instrumentalla?rare. Underso?kningen tar sin teoretiska utga?ngspunkt ur ett kulturpsykologsikt perspektiv da?r synen pa? la?rande ses som en process som utvecklas mellan individer i en lokalt ra?dande kultur.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Företaget Duroc Special Steel är en re-roller verksamhet och återfinns inom SSAB:s industriområde i Luleå. Produktionen innefattar valsning, glödgning samt slittning av varm- och kallvalsade stålband i kundanpassade storlekar. Duroc Special Steel ingår i Durockoncernen tillsammans med 17 andra bolag.Företaget har nyligen insett att ställtiden i slitten är för lång med tanke på hur nuvarande produktion ser ut. I vissa fall är slitten en flaskhals på grund av att de anställda inte hinner med omställningsarbetet i tid till nästa produkt. De vill därför genomföra en studie över vad som kan göras för att dels förkorta ställtiden och dels förbättra byggningen av skärverk, vilket är huvuddelen i ställarbetet.

Tobii Technology AB is a global leading company in eye tracking. The technology is a part of acomputer screen called an eye tracker. It enables computers to follow eye movement whichfurther make it possible to control the computer by only using your eyes.The mission was to develop an arcade game for eye controlled games that Tobii can use in theirmarketing or as a tool when doing researches about the interest in the technology amongst gamecompanies. The product realization involved designing an innovative, functional and futuristiccase which gathered the existing hardware and software to build the final prototype. In order toattract users it was important to focus on the visual expressions.Initially, the project started off with an information retrieval which contained interviews, fieldstudies, tests and literature studies.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Inom dagens byggande i Sverige ställs allt högre krav på den värmeisolerande förmågan hos klimatskärmen i de hus som byggs. Detta ställer i sin tur högre krav på konstruktionerna och medför även ny problematik. Standardlösningar som tidigare fungerat bra byts ut mot nya, ibland obeprövade, lösningar. De hårdare kraven på energi- och fuktdimensionering innebär alltså att vikten av val av stommaterial ökar vid en projektering.Vi har här försökt ge en realistisk bild av hur valet av reglar kan påverka energi och fukttillståndet hos en byggnad med utfackningsväggar, med fokus på reglar i fält. Till undersökningen användes referensobjekt i form av ritningar som tillhandahölls av handledaren på Clarus arkitekter.

This master thesis is a study of anaerobic thread lockers and is done in cooperation withÖhlins Racing AB, which is a Swedish manufacturer of vehicle suspensions.The suspension in vehicles is constantly exposed to high vibration levels and a suspensionunit has several screw- and cylindrical joints. As an extra safety precaution so that thecomponents in the suspension doesn?t fall apart when using the vehicle, an anaerobicthreadlocker is added in these joints. The handling of these threadlockers is not totallyharmless and could lead to allergic reactions, and therefore there are Swedish laws to limit theuse of these. However, new types of anaerobic threadlockers have recently been launched onthe marked that are not considered under this law.