The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

A current issue today is to try to implement creative design as a way to solve wicked problems in scientific contexts such as HCI. Since the problems are wicked, they have no given solution which makes the traditional methods inadequate. In these cases, creative design can be an alternative. Creative design is not used in scientific contexts because it is viewed as something unaccountable.In this essay we argue that creative design not necessarily have to be unaccounted. We discuss various views of creative design and translate theory to a practical context.

This paper deals with the difficulties of applying user-centered design practices as an independent developer, based on the visualization of a game concept in the form of a prototype. The aim is to evaluate the usability of user-centered design practices, specifically in the field of games development. Throughout this paper, I will give an account of the methods used for testing, as well as a review of previous research done in this field of study. Finally, I will end with a discussion regarding the pros and cons of user-centered design, as well as some thoughts about its importance in similar projects..

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Today, high-yielding leys of good quality are a must for Swedish dairy and beef enterprises if they are to become profitable. Thus, it is of interest to evaluate the quality of the recently released high-yielding Festulolium hybrids ((Festulolium braunii (K.Rich.) A.Camus). The aim of this project was to determine at what phenological stage three different Festulolium hybrids should be cut in order to get the highest nutritional value. The hybrids studied were Hykor, Perun and Paulita. In the study I also investigated if leaf proportion of the crop could be useful for predictions of the crop content of metabolizable energy. The cultivars were grown in plots within a variety trial with ryegrasses.

This study sheds light on the firm-lifecycle and the impact of leadership and how itdevelops negatively when the entrepreneurial firm becomes administrative andmanagerial. The ambivalent fact is that the firm, when growing in size, need to becomemore managerial, though without undermining the previously entrepreneurial mind-setthat pervade the organization. The term corporate entrepreneurship has emerged andcomprises that the firm can continue to be entrepreneurial in the managerial stage. Thatis to resume the firm?s work to keep innovative.

The background to this study is the government’s investment in design and the increase of design education around the country. As a future design teacher (industrialdesign) at high school/college, it is of great interest for me to look closer at student’s attitude towards design and design educations at high school.Questions that have been investigated are student´s attitude towards design; design as a concept but also as a phenomenon. How does the student counselor inform the students of the differentchoices before choosing high school?Does the students view on design correspond to what the student counselor say?What opinion does the student counselor have to the concept design as well as design in highschool? Is design just a craze or here to stay?To get answers I have made interviews with student counselors at two different schools, I have also been in contact with a student counselor on the internet. Their thoughts will clarify thesituation that the students might be in.

AbstractPain among patients in their final stage of life is a commonly occurring problem. Results fromthe Swedish Register of Palliative Care (SRPC) indicate that validated instruments forassessing pain are rarely used. Nurses' insufficient knowledge of pain and pain treatmentmethods may be a cause of maltreatment of patients who suffer from pain.The goal of this study was to determine whether training within the area of pain, painassessment and pain assessment instruments increases the use of validated pain assessmentinstruments utilized by nurses working in care homes for patients in the final stage of life inthe city of Uppsala.Method: A quantitative and quasi-experimental design was selected to perform the study.The intervention study that was used consisted of one training session where onequestionnaire was given before and one after the time of training. Register data were collectedfrom the SRPC given the question of pain assessment before and after the intervention.Results: The study showed that nurses more often used pain assessment instruments after thetraining session. The results also showed that nurses to a greater extent than before alternatedbetween the two validated pain assessment instruments that were introduced at the trainingsession.Conclusion: The results showed that when nurses at care homes are given training in the areaof pain and pain assessment they absorb and use the newly acquired knowledge in theirclinical work..

The aim of this report is to see whether the graphic design of a game influences children?s will to play games. I am especially looking at minimalist graphic design and how well it works for a game aimed at children age 7-9. Does the style of the game design have any impact at all concerning the children?s wish to play the game or is the game mechanic all that matters.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

The Swedish government ratified on May 1 2009 an amendment of marital law, resulting in same-sex marriage becoming legalized. With the rights of the Christian Swedish state church to officiate weddings originating from the same law, the church was thereby faced with two options: Either officially include same-sex couples in the Christian concept of holy matrimony and keep the right to officiate weddings; or give up the right to officiate weddings altogether. An official decision to accept the terms was reached on October 22 2009, but not without being preceded by an agitated medial debate.This research attempts to analyze the arguments of the debate in three stages: In the first stage the arguments are categorized according to their respective ideological standpoint. In the second stage these categories are examined from post-modern, social constructivist and socialization theory perspectives. Based on this, the third stage sees the arguments analyzed from a viewpoint based in the Copenhagen school concept of securization.The research concludes that the debate does not only simply feature two sides with differences of opinion; but rather that the arguments of the two opposing sides are founded in a common view of the other side as a fundamental threat to ones conception of a sound society..

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

The Swedish government ratified on May 1 2009 an amendment of marital law, resulting in same-sex marriage becoming legalized. With the rights of the Christian Swedish state church to officiate weddings originating from the same law, the church was thereby faced with two options: Either officially include same-sex couples in the Christian concept of holy matrimony and keep the right to officiate weddings; or give up the right to officiate weddings altogether. An official decision to accept the terms was reached on October 22 2009, but not without being preceded by an agitated medial debate.This research attempts to analyze the arguments of the debate in three stages: In the first stage the arguments are categorized according to their respective ideological standpoint. In the second stage these categories are examined from post-modern, social constructivist and socialization theory perspectives. Based on this, the third stage sees the arguments analyzed from a viewpoint based in the Copenhagen school concept of securization.The research concludes that the debate does not only simply feature two sides with differences of opinion; but rather that the arguments of the two opposing sides are founded in a common view of the other side as a fundamental threat to ones conception of a sound society..

Rotskärsskolan is located in Skutskär, Älvkarleby municipality and the school conducted today consists of lower secondary. The school was built in the early 1960s and contains three buildings. Today there is a great need for reconstruction of Rotskärsskolan, when the premises are worn out and not suitable for today's education. It must therefore be a phased change involving all the school buildings, starting in the winter of 2008/2009.Our degree project involves one of these buildings, called house F. This building will, by a recent decision, be adjusted for classes from preschool up to grade five, special school and leisure activities when some of the municipality's schools will consolidate.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.