This essay gives the reader an overview of the different problems and issues a landscape architect might meet, in the process of planning and realizing an eco-village. Its aim is to stimulate new ideas, based on the traditional, present and future working field of landscape architects. The essay does not claim to cover all imaginable aspects of social sustainability within an eco- village, but refers to the presented sources for further in-depth reading. Although the original focus has been on physical planning, the interviewees? words have been of big importance, and to a certain extent changed the constitution of this essay.

This thesis examines the legal boundaries of third-party use of trademarks in the European customized clothing market. The purpose is to determine under what circumstances third parties may legally modify and sell trademarked apparel without infringing on trademark rights. The study employs a legal dogmatic method, analyzing EU trademark law, case law, and legal doctrine to clarify the scope of exclusive rights and their limitations. By analyzing key EU case law, the study further illustrates how the legal framework has been interpreted and applied in cases concerning third-party trademark use. Given the increasing demand for customized fashion and the rise of new business models in the clothing industry, this topic holds significant legal and economic relevance. Additionally, Schumpeter?s theory of creative destruction provides a theoretical perspective on how trademark restrictions impact innovation and market competition.

This master thesis is intended to give an increased understanding of the stress state in an axle, which is assembled in one of Atlas Copco?s mountain drilling rigs. The main problems investigated were how the axle is affected when the bearing is worn, when the pretension is varied, and how to dimension the axle. Answers to these questions were found by using hand calculations, practical testing and with Finite Element analyzes. The dimensioning of the axle is currently based on the bending stress, but the author?s opinion is that the axle should be dimensioned considering the equivalent stress.

In the last decade, member states of the European Union have adopted a range of measures to decrease the dependency on fossil fuels. This has led to an increased use of biomass in heat and power production. In some countries, the lack of forest resource has led to large scale power producers importing their biomass needs. Due to high energy content and homogeneity, wood pellets have become an internationally traded commodity used for large scale power production. The Baltic States have emerged as one of the largest wood pellet exporting regions in Europe.

This paper is a literature review that examines how good mental calculation skills benefit pupils, which could work as a valuable learning tool for future teachers. The study addresses four key questions: ?What are the advantages of proficient mental calculations??, ?What strategies exist for mental calculation skills??, ?How can teachers accommodate their teaching to develop pupils? mental calculation skills?? and ?What has arithmetic looked like in different eras and what algorithms have been used??. Through literature searches in search engines, scientific articles were found, which formed the basis for the result segment. This was divided into two parts: A historical and a didactic overview.

Title: Pricing of IPO:s on the Swedish stock market Authors: Mikael Gustavsson Martin Kvist Henrik Wannberg Tutor: Anders Hederstierna Problem: There are certain sets of problems for underwriters when they are pricing potential stock-exchange companies. The problem partly consists of estimating the demand at an IPO and also to accurately value the business in comparison to the market. To set the price per share is problematic, since the company carrying out the public offering wants to optimise the amount of capital at the same time as they want the share to be subscribed in full. If the IPO would not be carried out, it could cause harm to the position of the underwriters. Purpose: To investigate whether underpricing exists associated with IPO:s on the Swedish market during the period 1995-1999. Method: The collection of data has been achieved by means of: Internet, E-mail and telephone calls. Conclusions: We have reached the conclusion that oversubscribing in comparison to the return at an IPO has an average growth of 3.3 per cent the first day, on every occasion of oversubscribing. For the studied population, including 138 initial public offerings, the average market value rise is 15 per cent the first day. When we made our calculations, adjustments have been made for the general index of Affärsvärlden (AFGX).

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Safe operation of a large synchronous power system as Nordel is not an easy task.There are several aspects to take into consideration. This thesis focuses on the problems due to voltage collapses in a transmission system.The ability to foresee an upcoming collapse is vital to maintain stable operation of the grid. The grid operator at Svenska Kraftnät (SvK) uses the computer program SPICA to predict the maximum transfer limit at specified transfer sections. SPICA uses actual states from the grid to predict the transfer limitation, and a quarter later a renewed estimate is produced and so on. This means that the operator can se his transfer limits vary every fifteen minutes.Our task in this project is to validate the accuracy of the limitations obtained by SPICA.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

Abstrakt -  As energy prices rise, energy-saving in buildings is becoming increasingly important. By applying different construction and installation technologies, to new buildings the energy consumption can be reduced effectively, compared to similar existing buildings. These technical measures are often an investment in the long term and will reduce energy costs significantly. The purpose of this report is to show how to reduce energy consumption in a small house. It is presented in this report that both building's technical saving arrangements (the sealing of a building) and an installation technical arrangement (changing from the F-system to the FTX-system) would reduce energy consumption in newly built detached houses, if compared with a similar existing house but without these technical measures. The report presents also detailed calculations showing how much energy an existing 2-storey house, built in the year 2007 in Eskilstuna, consumes and how much energy would be saved if these corrective measures were applied to a new building. It is also reported how much money would be saved each year over a 10 year period if the measures were applied. The results show that both solutions are a good investment in the reduction of energy consumption and hence the cost involved. Keywords: energy, heat energy, infiltration, FTX-system, free temperature effectively. .

Göteborg Energi AB är ett bolag med höga ambitioner att säkerställa ett stabilt distributionsnät för sina kunder. Med ett säkerställande följer åtgärder i form av beräkningar för komponenter som transformatorer av olika märkeffekt, hög- och lågspänningssäkringar och andra kritiska skyddsanordningar som t.ex. reläskydd. Vid ett flertal tillfällen under de senaste åren har det uppmärksammats en problematik där ett fel i lågspänningsnätet har löst ut anslutande transformator. Felet har grundat sig en svag selektivitet mellan transformatorsäkring och lågspänningssäkring.

Both the German and the Nordic power markets are seeing dramatically changed conditions due to an ongoing process of expanding the share of renewable production in the systems. For the German part this comes from heavy subsidies which have led to an explosive development in installed capacity of photovoltaic and wind based production. After the Fukushima incident it has been decided to shut down all Germanys nuclear plants. This capacity drop is however not of the same magnitude as the increase in renewables, but will impact the stability of the power system. The Nordic power system which already has a surplus of power sees an even further increase, coming mainly from construction of new nuclear plants in Finland and a general increase in wind farms.