Sökresultat:
9144 Uppsatser om Speed reduction method - Sida 23 av 610
Analys av tanniner : från granbarksextrakt
The objective for this master?s thesis was to test and evaluate two methods for determining the content of tannin in a pinebarkextract. The methods used at Södra for this previously have not been specific enough, only the amount of polyphenolics have been measured. One of these methods is a test based on the Stiasny test and it determines the extracts ability to form a gel with formaldehyde. When this test was carried out it showed that the extract did not contain much tannin.
Läsförståelse av faktatexter i NO, med stöd av Leselos, en norsk arbetsmodell : En fallstudie av en intervention i årskurs 3
To read and understand are essential competences for everyone in our society; at the same time reading comprehension among Swedish pupils is on the decline. The Swedish school must therefore try to improve their instructions to increase the students' reading comprehension. The aim of the study was to describe how three reading comprehension strategies, if possible, could improve the reading comprehension for the students, including children with learning disabilities, when reading texts of natural science in a third-grade class. The three strategies that were introduced were: to activate prior knowledge, to structure information and to record contents. The questions of the study were: How are the three strategies introduced in the classroom? Can the children with learning disabilities see any benefits for their reading comprehension when working with the strategies? How do the children with learning disabilities experience working with the strategies? Can the teacher see any benefits when working with the strategies? Is it possible to see any differences among the students' results, before and after completed intervention? Method: The results have been collected through observations and qualitative interviews, which make this a qualitative study.
Att skriva sig till läsning via datorn : Lärarens val?
The purpose of my study is to examine why five primary school teachers chose to start using the method ?Learning reading by writing on computer? in their teaching. How do they perceive that the method works in their classroom and do they perceive that the method affect the children?s literacy?The study consists of a qualitative method in form of interviews with five primary school teachers and also some observations made by me in the classrooms. I will use the findings I made during the interviews and observations and contrast these to relevant literature and research that I have collected.The result of my study shows that all of the interviewed teachers had a self-interest in working with the method ?Learning reading by writing on computers? and that they also worked closely with colleagues.
Matematik i ämnet matlagning : Hur förändra elevernas attityd till matematik på Restaurang- & Livsmedelsprogrammet
Most of my 16 students show a negative attitude towards mathematics and have difficulty understanding why they need mathematics to work as cooks. Their lack of knowledge has a negative effect on their work in the kitchen because they cannot master relatively simple mathematical solutions. The purpose of this study is to examine if an integrated working method of the subjects mathematics and cooking can change students? attitude towards mathematics and increase their understanding of the value of it in restaurant work. An integrated working method means to integrate the core subjects with programme specific subjects and that teaching is directed towards the main features of the vocational programme in order to create a holistic view.A theory of action research has been applied in this study, aiming to change something perceived as problematic through combining theory and practice in the cooking subject.
Är fiberarmerad sprutbetong motiverad ur bärighetssynpunkt? : En jämförelse med traditionell släntning och jordspikning
This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.
Deltack, Blanket Study
There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..
Validering av Casmo-5M / Simulate-3
The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).
Minnesallokering och debugverktyg
The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.
Optimerad höstveteetablering : en litteratursammanställning om såtid, radavstånd och utsädesmängd
This bachelor thesis is intended to gather the knowledge and experimental data on the winter wheat crop production relevant for Swedish conditions, with focus on sowing time, row spacing and seed rate. This essay is a literature study with a minor component based on interviews with farmers producing winter wheat. The work is divided into a background part where basic knowledge of winter wheat physiology, development and environment interactions are described and one part where results of field trials studies are presented.
Optimal date of sowing winter wheat depends on annual weather variations. Because it is difficult to forecast the weather the choice of sowing date should be based on weather statistics, production experience and previous results depending on sowing date.
Utveckling av processparametrar inom en hårdmetallindustri
This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.
Nya regler i sjukförsäkringen - fler personer i utanförskap?
The purpose of this paper is to study the rules of the bill 2007/08: 136 "Areformed sick-leave process of increased return to work" as related to therehabilitation chain. In the interpretation of the material I have used the ?practicallegal method? and a minor empirical study has been conducted to find out howRegion Skåne and UMAS adjust their activities to the new regulations.The government aims to reduce sick leave and on March 19, 2008,the above mentioned bill was presented to the Riksdag. The bill is a part of thegovernment's package of measures and contains proposals for a revised sick-leaveprocess. The rehabilitation chain is a part of the package and includes actions witha tighter schedule.The employer is still after the new rules playing a central role in thesick-leave process and must through early and continuous contact with theworkers start the rehabilitation process.
Lönar det sig att arrangera tävlingar för bästa uppsats och affärsidé?
Purpose: The purpose with this paper is to get a deeper understanding for
prizes and awards as a marketing tool and phenomena. Further we want
companies/organizations that use this should be able to make better decisions
concerning marketing towards students. Maybe they will get better results on
the basis of our investigations.
Method: We used the qualitative method when we did the interview that was also
non-standardized. The survey was quantitative, and the case study comprises
both qualitative and quantitative method.
Conclusion: Companies/organizations that arrange this type of competitions have
to look over their marketing of the competition.
Trastuzumab som adjuvant behandling avbröstcancerpatienter med HER2-positivitet : Hur effektivt är det?
Breast cancer is the most common tumor disease among women in Sweden. About 7000persons, having a median age of 65, are diagnosed each year with this disease. Withmammography screening, breast cancer can be detected in an early stage which improves theoverall survival (OS). 20-30 % of the breast cancer tumors are overexpressing humanepidermal growth factor receptor 2 (HER2), which is a protein that stimulates cell proliferation.Trastuzumab (Herceptin®) is a humanised monoclonal antibody that targets the HER2-proteinand prevent the signals for cell proliferation.Trastuzumab has earlier been used for treatment of metastatic breast cancer. In the year of 2007trastuzumab was approved for adjuvant treatment of patients who has been medicated withsurgery and/or radiation.The aim of this study was to investigate the effects of adjuvant treatment with trastuzumab inHER2-positive breast cancer patients.
Arbetsgivares ansvar för rehabilitering : Vägen tillbaka i arbete, lång eller kort?
Aim and questions: The purpose of this paper is to clarify the responsibilities employers have for rehabilitation and to explore how it conforms to an employers' actual condi-tions. Furthermore, the intention is to increase knowledge of how employers interact with other partners in the rehabilitation process and what affects sick people to return to work. The following three questions form the basis of this paper: What are employers? responsibilities for rehabilitation under the law and how is it consistent with an employer's actual conditions? What is the role of employers in the rehabilitation co- operation with other actors? What factors influence sick people to return to work?Method: The paper has used a true scientific and a legal sociological method to examine how the regulated employer responsibility for rehabilitation relates to what is practical in re-ality. To achieve the purpose, four empirical interviews were conducted with Örebro Municipality, Insurance, occupational health Previa and a doctor, which all of them have an important role in the rehabilitation process.
Elimineringen av korridormetoden - Hur svenska företags nyckeltal påverkas
In 2011 the International Accounting Standards Board issued amendments to IAS 19 Employee Benefits. The new standard is effective from January 1st 2013 and one of the largest changes in the standard is the elimination of the corridor method. Through the corridor method companies had the possibility to defer actuarial gains and losses resulting from their defined benefit obligations (pension obligations) and leave them unrecognized off the balance sheet. According to the new standard companies reporting under International Financial Reporting Standards will have to recognize all actuarial gains and losses immediately in other comprehensive income. The aim of this thesis is to examine how the financial key ratios of Swedish listed companies will be affected by the elimination of the corridor method.