This essay is about literature instruction in the last three years of Sweden?s compulsory school from one teacher?s and six of his pupils? perspective. The research is analysed from a socio-cultural perspective on learning and literature reception.The empiric material is based on interviews with the teacher and six of his students.The research shows that there is a difference between what the pupils read on their spare time and what they read during Swedish instruction. It also shows that the pupils wants literature full of action where descriptions of people and the setting don?t slow down the reading experience.The teacher is successful in finding literature the pupils appreciate but sees the value of literature on another level ? in the processing of the reading experience.

The aim of this study has been to highlight the situation for young men within the context of honour. The aim has also been to highlight the restrictions of young men within the context of honour, and how they rebel against those demands. The study was based on a qualitative research method and carried out in Sweden. The results have been analyzed using the hermeneutic perspective. The results showed that the situation for young men within the context of honour is often manifested by controlling their sisters and the expectation that the young men support their families in the future by marring a woman who has been approved by the collective.

The aim of this paper is to examine how the design of management control in a retail trade company affects motivation among its employees. Our purpose is to identify what actions create motivation and how management can benefit by developing and promoting such activity from its high-performing employees. Motivated personnel have become increasingly important in companies today, and companies are increasingly reliant on individual employees? capabilities. The study covers all parts of the management control system, to see how these align to create goal congruence in an organizational context.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included Spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

This thesis has been written at Linköping University for the company Instrument Control Sweden AB (ICS).ICS is a small company located in Linköping that develops software and hardware for Unmanned Aerial Vehicles, UAV. At present, ICS has a fully functional autopilot called EasyPilot but they want to reduce the autopilot?s size to make it more attractive.The purpose of this thesis was to investigate if it was possible to reduce the size of the autopilot and how, in that case, it would be done. It was also necessary to examine whether the old processors should be replaced by new ones and how hard it would be to convert the old software to these new processors.To succeed with the goals many of the old components had to be changed for new, smaller ones. Some less necessary parts were also completely removed.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included Spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

This paper examines the concept of heritage and which factors that determines how we evaluate and select what should be considered cultural heritage. This has been examined using a qualitative study involving interviews with seven people working within different parts of the cultural heritage sector. The purpose was to get a picture of what the public sector?s cultural heritage consists of and why so. The research question was: What gives the status of cultural heritage? This was examined by looking at further questions: What defines the concept of cultural heritage? Who decides what should be considered cultural heritage? What is significant when discussing cultural heritage? One conclusion is that the concept itself is experienced as diffuse but that the meaning can be summarized as the traces we leave behind to be preserved by future generations.

The study is about Physical Education as a subject that offers students in Upper Secondary School a possibility to a life long interest in exercising. The study focuses on whether there is a difference between study concentrate programmes and profession concentrate programmes. The study also includes differences among exercising and non-exercising students. Earlier research shows that many youths don?t have an exercise form that they spend their spare time in.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

AbstractIn Östhammar a change has been noticed in the statistics regarding incoming reports, appraisals and investigations concerning a suspicion that a child or youth may be harmed.There are some earlier reaserch made concerning the sorting process that takes place when a report is made. In Östhammar the social workers have been interested in finding out what the main reasons are for not opening an investigation. It has also been some research from the ?sociology of childhood perspective? on how childhood is being constructed and how children are positioned in the investigative texts. From a social constructionist perspective and by using both a quantitative and a qualitative research, I have examined all the reports that have not led to an investigation from the first quarter of 2011 in Östhammar. This to find out the main explanations for not investigating and how children are positioned in such appraisals.It has been shown that most appraisals closed either because of the situation which led to the declaration no longer exists, to another input already exists, the problem is not seen as  serious or that it was felt that the parents are capable of giving the support they need. I have discovered that the childs voice is missing in most of the report investigations. I have not found any explanations to why one has chosen not to speak with the child, but there may be explanations such as limited time, limited knowledge or a will to spare the child the discomfort..

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.