Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

Background:Persons living with a mental illness often have to put up with a financial disadvantage. Their ability to work is often limited and because of that they have to rely on the welfare reform to get an income. This income is often low compared to other citizens which by itself is something strongly associated with mental illness. Purpose: The purpose in this study was to describe how people living with a mental illness experience that their economic situation has an impact on their daily life. Method: This study is a literature review containing nine scientific articles from previous research.

The aim of this Master?s thesis is to investigate the factors of children?s voluntarily reading in their spare time. We also want to know if the children choose non-fiction books for their voluntarily reading. The method as well as the empirical basis of this study is qualitative, with interviews of twenty-eight children in ages between 9 and 12 years. We conducted nine interviews with 3?4 children in each group.

Information technology inflicts upon us in our everyday life. It is a natural part of our work and of our spare time. The education system is not excluded from this development, IT is becoming an important part of education at all levels. In university, learning platforms is one of these new ways of using IT in education. Learning platforms becomes a valuable tool for teachers and students.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

There are regulations in sweden that require organizations to manage occupational,  health and safetey (OH&S) issues in a systematic way. The contents of the management system vary depending of the activity of the specific organisation. An accurate management system is crucial in order to assure that rules and regulations are fullfilled. The OHSAS 18001 standard covering OH&S management is intended to provide organizations with the elements of an efficient OH&S management system. The work with this thesis was done at Swemat AB in Härnösand wich is a mechanical industry. In the thesis, the requirements of the OHSAS standard are compared with the current management system.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The aim of this Master?s thesis is to investigate the factors of children?s voluntarily reading in their spare time. We also want to know if the children choose non-fiction books for their voluntarily reading. The method as well as the empirical basis of this study is qualitative, with interviews of twenty-eight children in ages between 9 and 12 years. We conducted nine interviews with 3?4 children in each group.

 The food-safety legislation in Sweden were changed and updated in 1996, much because of demands from the European Union for a common legislation regarding the food-safety issues in the EU. This report discusses how the Swedish authorities are dealing with the new legislation in Sweden. Further on the report presents how the food safety officers in the municipalities in Sweden are implementing this new legislation in their daily work, especially the requirements regarding the HACCP, Hazard Analysis Control and Checkpoints. The report shows that the implementation is quite slow and that many foodsafety-officers don?t implement the legislation in the same way all over the country.

The aim of this Bachelor thesis is to gain an insight into whatgirls and boys choose to read in their spare time. Thetheoretical perspective with which the subject matter isviewed is that of gender and genre. I would like to see ifthere are differences or similarities in their choice of genre.The material stems from a promotional reading projectconducted in the summer of 2012 aimed at children in theage group 6-16. The number of participation children were146 an 730 books were read. They were divided into agegroups and genres respectively.The analytical method is a quantitative and qualitativecontent analysis.

The main purpose of this essay is to examine, in what way the paintings by Karin Broosand Markus Åkesson are images of autentic situations and furthermore in what way themediespecific essence is performed photografically. Questions occuring: 1) How are thecreations of reality shaped in the two chosen photorealistical paintings? 2) In what waycan you distinguish the iconicity and indexicality in the paintings Den vita klänningenand The Passage? 3) How does the photografic presence occur in the paintings andfuthermore how can you distinguish the mentioned parts above according to thepaintings? The theoretical standpoint is based upon Charles Sanders Peirces ideasconcerning iconicity and indexicality. The methods used are based on thoughtspresented by Andrew Benjamin and Mieke Bal. The signs of iconicity and indexicalitycan be studied in various ways in the two paintings, depending on how abstract andobvious different parts occur in the paintings.

The purpose of this thesis was to help the company Medius AB with optimization of selected parts in an existing system to minimize the execution time by implementing multithreading. The idea was to manipulate the code so that calculations could be executed at the same time. The main work in this thesis consisted of three optimizations. The first one was to reconstruct a big ?for-loop? so it would execute every loop's work in an own thread. The second optimization also was a reconstruct of a ?for-loop? so it could execute the work in different threads. The third and last optimization consisted of reconstructing a stored procedure on the database, so different parts of it each could be executed in an own thread to create data at the same time. To implement the optimizations Visual Basic .NET and its support for multithreading and connection-pools was used. The result of the optimizations meant that one of the modules could be executed more efficiently and it was 12 % faster. The other modules execution time was more efficient by 25 % faster. The meanings and requirements for this thesis are fulfilled by now letting the system make use of its resources in a better way..

This paper deals with monetary development on Gotland during 11th century. The expectation is that by examining five different silver-hoards from various parts of the century it will be able to determine if there are any signs of monetary developments. By examining the silver-hoards weight and comparing the weight difference between the Coined silver, the fragmented coins and other silver objects, this paper determine which of these dominate the silver-hoards in 11thcentury. Apart from the weight comparison an accurate study of the degree of fragmentation on coins in the silver-hoards will give a detailed account on how the people of Gotland treated their coins, if they cut the coins into smaller pieces or if they handled them whole.Apart from the study of the silver-hoards there is a chapter on earlier research where the reader will acquire the knowledge to comprehend the other parts of the paper. Which include a theory chapter where the author discusses what factors need be in place for monetary development to commence and what monetary development imply.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.